F5F Stay Refreshed Hardware Desktop No Output

No Output

No Output

A
AccioMalfoy
Member
71
07-13-2021, 08:32 AM
#1
I just completed a new PC setup: https://it.pcpartpicker.com/list/s22vMb Everything functioned properly. However, I couldn't sync my MSI ARGB fans with the motherboard firmware. I unplugged and plugged in the d_led cable I had connected them to. When I restarted the PC, everything worked again except for the CPU block LED, which didn’t light up and there was no display on the monitor. I’m not sure what went wrong. All the ARGB fans were originally mounted inside the case.
A
AccioMalfoy
07-13-2021, 08:32 AM #1

I just completed a new PC setup: https://it.pcpartpicker.com/list/s22vMb Everything functioned properly. However, I couldn't sync my MSI ARGB fans with the motherboard firmware. I unplugged and plugged in the d_led cable I had connected them to. When I restarted the PC, everything worked again except for the CPU block LED, which didn’t light up and there was no display on the monitor. I’m not sure what went wrong. All the ARGB fans were originally mounted inside the case.

H
HBROS1245
Member
179
07-15-2021, 12:25 AM
#2
Check if you can turn off the fan hub without any fans linked to RGB for testing purposes
H
HBROS1245
07-15-2021, 12:25 AM #2

Check if you can turn off the fan hub without any fans linked to RGB for testing purposes

R
RedSqnd
Junior Member
16
07-15-2021, 11:53 PM
#3
Are you attempting to separate the RGB signal from the fan connections?
R
RedSqnd
07-15-2021, 11:53 PM #3

Are you attempting to separate the RGB signal from the fan connections?

M
majorpain96
Junior Member
46
07-17-2021, 07:54 AM
#4
From the fan hub yes
M
majorpain96
07-17-2021, 07:54 AM #4

From the fan hub yes

C
ChickenPhoYou
Posting Freak
850
07-18-2021, 06:50 AM
#5
The fans operate correctly, yet there is no power generation.
C
ChickenPhoYou
07-18-2021, 06:50 AM #5

The fans operate correctly, yet there is no power generation.

T
ThatMiningGuy
Senior Member
704
07-19-2021, 08:13 AM
#6
Check if the system starts and displays content without the RGB connection.
T
ThatMiningGuy
07-19-2021, 08:13 AM #6

Check if the system starts and displays content without the RGB connection.

D
DJemi
Member
150
08-06-2021, 07:49 PM
#7
Are you trying to disconnect the d_led and check for any signal? Since I just completed it, there should be no output.
D
DJemi
08-06-2021, 07:49 PM #7

Are you trying to disconnect the d_led and check for any signal? Since I just completed it, there should be no output.

M
martintrit
Junior Member
9
08-06-2021, 10:12 PM
#8
It seems unusual—inspect your display cable, possibly disconnect all fans, and try using the IGPU if available. If none of these works, reach out to your motherboard manufacturer for assistance.
M
martintrit
08-06-2021, 10:12 PM #8

It seems unusual—inspect your display cable, possibly disconnect all fans, and try using the IGPU if available. If none of these works, reach out to your motherboard manufacturer for assistance.