No luz de apagado en el Asus B550f.

SpartanHAT
Junior Member

02-16-2020, 06:14 PM

Hello, I'm working on fixing a build for a friend. From what I've seen, the PSU, GPU, RAM, and SSD are all working. During boot, no lights appear from the right side where issues usually show up. I've reset the CPU, swapped SSDs, flashed the BIOS, and changed the CMOS. When trying to boot via RGB on RAM, the GPU powers up and fans spin, but no screen shows up and the keyboard never lights up. If you have any suggestions, please share.

Specs: B550F, Wi-Fi, Ryzen 5 5600X, EVGA 2070, Samsung 500GB SSD, 650W PSU, Corsair DDR4 64GB RAM.

SpartanHAT

02-16-2020, 06:14 PM #1

GMB_01
Member

231

02-16-2020, 10:01 PM

Did you attempt using just one stick of Ram? (Removing the mobile from the case onto plain cardboard is a good way to diagnose) Edited September 3, 2024 by leclod

GMB_01

02-16-2020, 10:01 PM #2

Did you attempt using just one stick of Ram? (Removing the mobile from the case onto plain cardboard is a good way to diagnose) Edited September 3, 2024 by leclod

Misukee
Junior Member

02-18-2020, 09:42 AM

I attempted to use the CPU on another board. Verified if the CPU has bent pins.

Misukee

02-18-2020, 09:42 AM #3

I attempted to use the CPU on another board. Verified if the CPU has bent pins.

AJallstar99
Member

220

02-25-2020, 02:22 PM

I've used just a single RAM stick in all setups. I've verified the CPU receives power, yet the system seems to be missing it. (Zero bent pins, re-seated several times)

AJallstar99

02-25-2020, 02:22 PM #4

I've used just a single RAM stick in all setups. I've verified the CPU receives power, yet the system seems to be missing it. (Zero bent pins, re-seated several times)

Bladestorm117
Junior Member

02-25-2020, 03:28 PM

I don’t have another board to try. I’ve verified the CPU receives power, yet the system seems missing it. There are no bent pins, and I’ve reinserted the CPU several times.

Bladestorm117

02-25-2020, 03:28 PM #5

I don’t have another board to try. I’ve verified the CPU receives power, yet the system seems missing it. There are no bent pins, and I’ve reinserted the CPU several times.

dave_rock
Member

02-25-2020, 04:24 PM

The plan is to switch to another CPU and, if unsuccessful, another motherboard. You confirmed the remaining components function properly and completed all required actions.

dave_rock

02-25-2020, 04:24 PM #6

The plan is to switch to another CPU and, if unsuccessful, another motherboard. You confirmed the remaining components function properly and completed all required actions.