F5F Stay Refreshed Hardware Desktop No, it's not too hot.

No, it's not too hot.

No, it's not too hot.

Pages (2): 1 2 Next
P
patbreslin
Member
161
01-03-2023, 12:43 AM
#1
Got a brand-new desktop and curious if those numbers feel a bit high. I’ve been testing D4 at maximum settings for an hour. Here are my stats too.
P
patbreslin
01-03-2023, 12:43 AM #1

Got a brand-new desktop and curious if those numbers feel a bit high. I’ve been testing D4 at maximum settings for an hour. Here are my stats too.

N
NottaSpy
Member
232
01-03-2023, 01:37 AM
#2
It’s unusual for a Noctua cooler on the CPU, but the temperatures are important. You should also share your room temperature readings. Without knowing the temperature difference, it’s hard to judge performance. Also, the CM Q300 tends to limit airflow, which could contribute to the problem.
N
NottaSpy
01-03-2023, 01:37 AM #2

It’s unusual for a Noctua cooler on the CPU, but the temperatures are important. You should also share your room temperature readings. Without knowing the temperature difference, it’s hard to judge performance. Also, the CM Q300 tends to limit airflow, which could contribute to the problem.

H
hawk5strike
Member
55
01-03-2023, 05:25 AM
#3
It's true that the effectiveness of removing front and top dust filters depends on various factors. The extent of improvement varies based on usage, maintenance, and the type of filter used.
H
hawk5strike
01-03-2023, 05:25 AM #3

It's true that the effectiveness of removing front and top dust filters depends on various factors. The extent of improvement varies based on usage, maintenance, and the type of filter used.

Z
zorro8003PL
Member
131
01-03-2023, 09:02 AM
#4
Yes that cpu is thermal limited and a 7600x isn't exactly a hard to cool cpu at all. The q300l is a flawed case and your system is overheating because of it. Like diablo 4 isn't exactly a hard to run game yet your cpu is overheating and your gpu has been to max temp multiple times yet it has a really good cooler. Time to return this pc The q300l looks like it has a lot of airflow options BUT it actually is just as bad as those closed front cases with some side vents. This is because there is A TON of metal between the holes which chokes the fans and since the fans are right against the front they are struggling to get any decent pull of air. So you basically get very little fresh air in or out the case.
Z
zorro8003PL
01-03-2023, 09:02 AM #4

Yes that cpu is thermal limited and a 7600x isn't exactly a hard to cool cpu at all. The q300l is a flawed case and your system is overheating because of it. Like diablo 4 isn't exactly a hard to run game yet your cpu is overheating and your gpu has been to max temp multiple times yet it has a really good cooler. Time to return this pc The q300l looks like it has a lot of airflow options BUT it actually is just as bad as those closed front cases with some side vents. This is because there is A TON of metal between the holes which chokes the fans and since the fans are right against the front they are struggling to get any decent pull of air. So you basically get very little fresh air in or out the case.

K
kervinc
Posting Freak
804
01-16-2023, 08:50 AM
#5
Proably 21c I'm my office, maybe 22c Will give that a go! Defiently sounds like it's the case. Theres so much to these computers now I wasn't thinking I'd have the research even the case lol There is a ibuypower snowblind s case local to me, how are those?
K
kervinc
01-16-2023, 08:50 AM #5

Proably 21c I'm my office, maybe 22c Will give that a go! Defiently sounds like it's the case. Theres so much to these computers now I wasn't thinking I'd have the research even the case lol There is a ibuypower snowblind s case local to me, how are those?

T
turel528
Junior Member
8
01-16-2023, 01:19 PM
#6
Even worse! You require a mesh front panel. What you're describing is similar to the magnetic panels on the Q300L, which is acceptable mesh. All good.
T
turel528
01-16-2023, 01:19 PM #6

Even worse! You require a mesh front panel. What you're describing is similar to the magnetic panels on the Q300L, which is acceptable mesh. All good.

I
ImMtix
Junior Member
10
01-16-2023, 06:25 PM
#7
No, you shouldn't use a regular hole saw for that job. It's not designed for drilling through metal cases. Use a specialized tool like a drill bit or a chisel.
I
ImMtix
01-16-2023, 06:25 PM #7

No, you shouldn't use a regular hole saw for that job. It's not designed for drilling through metal cases. Use a specialized tool like a drill bit or a chisel.

S
Shardgale
Senior Member
547
01-18-2023, 12:05 AM
#8
Remove all items so you can handle metal flakes and dust.
S
Shardgale
01-18-2023, 12:05 AM #8

Remove all items so you can handle metal flakes and dust.

J
jokerman15
Junior Member
17
01-18-2023, 10:36 PM
#9
They have a Corsair 7000D local with solid reviews. It's a bit compact but there are no size issues. At 250mm, it looks promising—worth checking out!
J
jokerman15
01-18-2023, 10:36 PM #9

They have a Corsair 7000D local with solid reviews. It's a bit compact but there are no size issues. At 250mm, it looks promising—worth checking out!

S
Sheik1soul
Senior Member
511
01-20-2023, 01:49 AM
#10
Probably too much, these are not great.
S
Sheik1soul
01-20-2023, 01:49 AM #10

Probably too much, these are not great.

Pages (2): 1 2 Next