No imagen disponible para la placa BTC-T37.
No imagen disponible para la placa BTC-T37.
Hey there, how are you doing today? I’m a bit puzzled because buying simple video cards is more expensive than getting a first Soviet Union car. I have a problem with my motherboard I ordered online—it doesn’t display any video signal, not even the BIOS. When I power it on, it makes four beeps and then shows a black screen. The model is BTC-T37. What have you tried? I attempted to reset it using CLR_BIOS, but that didn’t help. Also, my laptop’s RAM works fine—it just needs to open BIOS with or without it. I removed the CMOS battery for about a minute and turned it back on, but the issue persists. Could someone assist me?
Are you connecting the monitor to the onboard graphics? If yes, look for a GPU and try again. If it's still that way or you've already connected the GPU, it might indicate a configuration issue, a faulty motherboard, or a defective CPU. I didn't realize why you picked that motherboard since the CPU appears soldered; if your purpose isn't mining, that would be a mistake. If the board is new, consider returning it if possible.
I haven't tested it on a GPU yet, but it seems to launch BIOS without any issues as long as the CPU and PSU are present.
It seems there might be some confusion. IGPU isn't typically a term used for CPU replacement, and it's not clear what you're referring to. If you meant something else, could you clarify? For CPU-related questions, I recommend checking the motherboard documentation or contacting the manufacturer.
The CPU is fixed, you can't switch to another one I've used with the GPU either.
You handled it well. The RAM was cleared and the CMOS reset successfully.
Prepare the system by unplugging the power supply, removing the battery press, and keeping the power button pressed for at least 30 seconds or until all motherboard lights fade. If using a breakout adapter, switch it off or remove it as well. Note that the factory setting for entering BIOS is configured to one second, so you’ll need to start pressing the delete or ESC keys quickly and repeatedly once it powers up.