No display

Commando__
Senior Member

744

03-23-2019, 03:02 PM

This PC has previously functioned well, yet now the display isn't receiving any video signal despite getting a signal. I've experimented with an R3 2200G and integrated graphics, but that didn't resolve the issue. Also, various RAM modules haven't helped. Noticing the RAM lights up when flipping the power switch on the sticks suggests the motherboard is the problem. Any advice would be greatly appreciated.

Commando__

03-23-2019, 03:02 PM #1

Sebluigi
Senior Member

727

03-23-2019, 06:27 PM

Yes, you can get video out through the motherboard if you have the 2200G installed. Are you also using the video card directly?

Sebluigi

03-23-2019, 06:27 PM #2

Yes, you can get video out through the motherboard if you have the 2200G installed. Are you also using the video card directly?

_R3CTIFI3D_
Junior Member

03-24-2019, 12:50 AM

The R5 3600x remains inside, but when the graphics card wasn't connected, the screen still received signals yet produced no output.

_R3CTIFI3D_

03-24-2019, 12:50 AM #3

The R5 3600x remains inside, but when the graphics card wasn't connected, the screen still received signals yet produced no output.

impiiii
Member

135

03-24-2019, 01:15 AM

The 3600X lacks a built-in video card, meaning video output isn’t available unless you install one as well. Insert the video card and link your video cable to it for display.

impiiii

03-24-2019, 01:15 AM #4

The 3600X lacks a built-in video card, meaning video output isn’t available unless you install one as well. Insert the video card and link your video cable to it for display.

1winnie5
Member

03-26-2019, 08:30 AM

I'm sorry you had trouble understanding the previous response. The graphics card was connected to both CPUs and HDMI on the card. I also removed it and used an R3 2200G with HDMI plugged into the Mobo. I tried all possible setups, but nothing worked.

1winnie5

03-26-2019, 08:30 AM #5

Beastboomer1
Member

169

03-28-2019, 12:13 AM

It seems like a motherboard problem might be at the root of the issue. Have you attempted to reset the BIOS/CCMOS and verified whether your display is connected to another monitor or TV? To clarify, you tried: 2200G without a video card, 2200G with a video card (also plugged in), 3600 with a video card (also plugged in), and none of them displayed video.

Beastboomer1

03-28-2019, 12:13 AM #6

spidersaur187
Member

201

04-02-2019, 01:10 AM

I recently tested a TV and it didn’t work at all. There don’t seem to be any solutions that fit. I’m planning to get a new Mobo soon, but it’s not far off. I also attempted a CMOS reset, but it didn’t help. Hopefully this device will function properly. Edited March 9, 2020 by UnnamedNoob

spidersaur187

04-02-2019, 01:10 AM #7

Trayleio
Member

04-03-2019, 07:08 AM

The orange indicator stays lit continuously, whereas previously it would flash when the CPU was misaligned.

Trayleio

04-03-2019, 07:08 AM #8

The orange indicator stays lit continuously, whereas previously it would flash when the CPU was misaligned.