No Display

bri14
Member

01-10-2025, 12:53 AM

Hi! It sounds like the system is recognizing your RAM but there might be an issue with how it's being installed or recognized. Since having one stick works fine but not both, check if the slots are properly seated and if the motherboard supports dual sticks. Also, ensure the RAM modules are correctly aligned and that the BIOS settings allow for dual-channel operation. If the problem persists, try reseating the sticks or consulting your motherboard manual.

bri14

01-10-2025, 12:53 AM #1

Warwolf10
Junior Member

01-11-2025, 03:30 AM

Various velocities?

Warwolf10

01-11-2025, 03:30 AM #2

Various velocities?

Zbob11
Member

198

01-21-2025, 11:07 AM

Different velocities are used for various purposes.

Zbob11

01-21-2025, 11:07 AM #3

Different velocities are used for various purposes.

Claire8
Junior Member

01-21-2025, 07:35 PM

Check your system details? A simple solution might involve refreshing your motherboard's firmware.

Claire8

01-21-2025, 07:35 PM #4

Check your system details? A simple solution might involve refreshing your motherboard's firmware.

_ImDustin
Member

230

02-06-2025, 06:10 AM

Identify your motherboard and components. Boot using a slower connection first, then adjust the clock speed and timing settings in the BIOS to match that configuration before adding the faster stick.

_ImDustin

02-06-2025, 06:10 AM #5

Identify your motherboard and components. Boot using a slower connection first, then adjust the clock speed and timing settings in the BIOS to match that configuration before adding the faster stick.

pandacorn1995
Junior Member

02-12-2025, 01:29 AM

Motherboard: Gigabyte A320M-S2H RAM: Corsair Vengeance LPX 16GB 3000MHZ (2x8GB) CPU: AMD Ryzen 3 3200G

pandacorn1995

02-12-2025, 01:29 AM #6

Motherboard: Gigabyte A320M-S2H RAM: Corsair Vengeance LPX 16GB 3000MHZ (2x8GB) CPU: AMD Ryzen 3 3200G