F5F Stay Refreshed Hardware Desktop No, 62° idle is not normal for the 7900x.

No, 62° idle is not normal for the 7900x.

No, 62° idle is not normal for the 7900x.

Pages (3): Previous 1 2 3 Next
T
TheKingHaz
Member
59
09-03-2022, 04:30 AM
#11
The chip with the temperature sensor location can safely reach 95°C, but it is limited to 85°C where it automatically reduces its output to stay within that limit (it won’t speed up further, just maintain steady performance without adding more than 30W to achieve another 50MHz). Everything is under control.
T
TheKingHaz
09-03-2022, 04:30 AM #11

The chip with the temperature sensor location can safely reach 95°C, but it is limited to 85°C where it automatically reduces its output to stay within that limit (it won’t speed up further, just maintain steady performance without adding more than 30W to achieve another 50MHz). Everything is under control.

D
djmange
Junior Member
42
09-03-2022, 05:01 AM
#12
Your high idle/desktop temperatures are likely due to low pump RPM. This isn't a major concern—idle readings aren't very informative, and as long as you stay below 70°C under load, it's fine.
D
djmange
09-03-2022, 05:01 AM #12

Your high idle/desktop temperatures are likely due to low pump RPM. This isn't a major concern—idle readings aren't very informative, and as long as you stay below 70°C under load, it's fine.

T
TheFallenRose
Senior Member
616
09-03-2022, 10:57 AM
#13
30w is typical for Ryzen CPUs during idle, doesn't fluctuate much between 0.3% and 0.6%, which confirms it's truly idle. The temperature is around 42°C after a game, usually staying between 33-36°C in low loads—this suggests a possible fan issue or improper cooler mounting. It’s best to remove Ryzen Master as it can interfere with voltage and temperature controls.
T
TheFallenRose
09-03-2022, 10:57 AM #13

30w is typical for Ryzen CPUs during idle, doesn't fluctuate much between 0.3% and 0.6%, which confirms it's truly idle. The temperature is around 42°C after a game, usually staying between 33-36°C in low loads—this suggests a possible fan issue or improper cooler mounting. It’s best to remove Ryzen Master as it can interfere with voltage and temperature controls.

H
hdardaris
Junior Member
9
09-03-2022, 05:01 PM
#14
Absolutely, maintaining full consistency is key.
H
hdardaris
09-03-2022, 05:01 PM #14

Absolutely, maintaining full consistency is key.

K
Katsumota
Member
57
09-03-2022, 11:02 PM
#15
I adjusted the pump to full temperature settings but it didn’t alter at all. Here’s the PC photo from when I set everything up. Are you overlooking something? I’ll also remove Ryzen Master to lower its clock speed. A.jpg
K
Katsumota
09-03-2022, 11:02 PM #15

I adjusted the pump to full temperature settings but it didn’t alter at all. Here’s the PC photo from when I set everything up. Are you overlooking something? I’ll also remove Ryzen Master to lower its clock speed. A.jpg

I
IPS10
Senior Member
623
09-04-2022, 01:52 AM
#16
I carefully adjusted it to 90% – not sure if it changes much
I
IPS10
09-04-2022, 01:52 AM #16

I carefully adjusted it to 90% – not sure if it changes much

M
MrSuslik
Member
58
09-04-2022, 06:57 PM
#17
Alright, understood. It's mostly just warm. 😊
M
MrSuslik
09-04-2022, 06:57 PM #17

Alright, understood. It's mostly just warm. 😊

M
MrCringles
Member
154
09-05-2022, 12:39 AM
#18
Remove Ryzen Master, reinitialize BIOS, fetch hwinfo64, and verify temperatures once more.
M
MrCringles
09-05-2022, 12:39 AM #18

Remove Ryzen Master, reinitialize BIOS, fetch hwinfo64, and verify temperatures once more.

C
Callysqually
Member
57
09-05-2022, 02:02 AM
#19
Thank you for helping me relax.
C
Callysqually
09-05-2022, 02:02 AM #19

Thank you for helping me relax.

K
kate88554
Member
65
09-05-2022, 10:17 AM
#20
I tested both 90 and 100, no change compared to when I had it at 50.
K
kate88554
09-05-2022, 10:17 AM #20

I tested both 90 and 100, no change compared to when I had it at 50.

Pages (3): Previous 1 2 3 Next