F5F Stay Refreshed Hardware Desktop Newly constructed system, items to verify

Newly constructed system, items to verify

Newly constructed system, items to verify

M
Mapley
Member
240
07-29-2022, 06:18 AM
#1
I just assembled a new system and wanted to verify everything is functioning properly. The only modification I made in the BIOS was enabling XMP for the memory. I haven’t installed a graphics card yet, relying on the built-in one temporarily. I’m keeping an eye on the upcoming major update.

The Cinebench multicore test returned a score of 1097, with peak temperatures reaching about 71°C. Idle temps were around 22°C. The room temperature is currently 19°C, which feels cooler, especially during winter.

There’s an issue with one of the case fans—it doesn’t spin up immediately and only starts after a minute or two. I reached out to Lian Li, who is sending me a replacement fan.

Here are the build details:
https://pcpartpicker.com/list/VGjJRK
https://imgur.com/a/DtWqUme
View: https://imgur.com/a/DtWqUme
M
Mapley
07-29-2022, 06:18 AM #1

I just assembled a new system and wanted to verify everything is functioning properly. The only modification I made in the BIOS was enabling XMP for the memory. I haven’t installed a graphics card yet, relying on the built-in one temporarily. I’m keeping an eye on the upcoming major update.

The Cinebench multicore test returned a score of 1097, with peak temperatures reaching about 71°C. Idle temps were around 22°C. The room temperature is currently 19°C, which feels cooler, especially during winter.

There’s an issue with one of the case fans—it doesn’t spin up immediately and only starts after a minute or two. I reached out to Lian Li, who is sending me a replacement fan.

Here are the build details:
https://pcpartpicker.com/list/VGjJRK
https://imgur.com/a/DtWqUme
View: https://imgur.com/a/DtWqUme

S
SayNoToNWO
Posting Freak
879
07-29-2022, 02:43 PM
#2
You are currently using BIOS version F2, but the most recent update is F21a. You can access the support page for further details at the provided link.
S
SayNoToNWO
07-29-2022, 02:43 PM #2

You are currently using BIOS version F2, but the most recent update is F21a. You can access the support page for further details at the provided link.

M
Monster_Q8
Junior Member
42
08-20-2022, 05:18 AM
#3
I checked the newest bios and everything worked fine.
M
Monster_Q8
08-20-2022, 05:18 AM #3

I checked the newest bios and everything worked fine.

Q
Q121
Junior Member
36
08-20-2022, 01:55 PM
#4
Unless you are having issues, I don't know that I would bother to flash the bios.
Common wisdom is to so only if it contains a fix that is impacting you.
OTOH, you are so early in the build process that a flash failure will not impact you.
Ryzen is very sensitive to ram.
One test I would do is to run memtest for at least one full pass with NO errors.
Q
Q121
08-20-2022, 01:55 PM #4

Unless you are having issues, I don't know that I would bother to flash the bios.
Common wisdom is to so only if it contains a fix that is impacting you.
OTOH, you are so early in the build process that a flash failure will not impact you.
Ryzen is very sensitive to ram.
One test I would do is to run memtest for at least one full pass with NO errors.

X
xXFirewitherXx
Posting Freak
878
08-27-2022, 06:43 PM
#5
For the latest update it mentioned a possible UEFI issue. I installed it without any problems. I plan to perform a memtest. On CPU-Z under the memory section for the channel, it displays 2 x32-bit. After some research, I expect 4 x32-bit for dual-channel setup. If that’s the situation, why isn’t it showing this? I have the RAM correctly installed in the motherboard slots.
X
xXFirewitherXx
08-27-2022, 06:43 PM #5

For the latest update it mentioned a possible UEFI issue. I installed it without any problems. I plan to perform a memtest. On CPU-Z under the memory section for the channel, it displays 2 x32-bit. After some research, I expect 4 x32-bit for dual-channel setup. If that’s the situation, why isn’t it showing this? I have the RAM correctly installed in the motherboard slots.