New to OC

F5F Stay Refreshed Hardware Desktop New to OC

New to OC

Okeinshield
Senior Member

595

06-13-2018, 04:50 PM

Hey there, I'm just starting out with overclocking and using a R3600 with a Wraith Prism on a B450 motherboard. I'm running MSI's 3000Mhz RAM and a 4100 MHz CPU at 1.337V, testing it on a Cinebench R20. I'm not sure what I'm doing and want to know the risks if things go wrong. Any tips or advice would be super helpful! Thanks!

Okeinshield

06-13-2018, 04:50 PM #1

KadePlaysMC2
Junior Member

06-14-2018, 11:45 AM

Avoid locking every core frequency, apply PBO and modify voltage via offset instead.

KadePlaysMC2

06-14-2018, 11:45 AM #2

Avoid locking every core frequency, apply PBO and modify voltage via offset instead.

LaloRush
Junior Member

06-16-2018, 07:29 AM

The PBO reaches 3.9 and voltage is fixed on master. Consider adjusting settings or checking connections.

LaloRush

06-16-2018, 07:29 AM #3

The PBO reaches 3.9 and voltage is fixed on master. Consider adjusting settings or checking connections.

ValentxD
Member

06-16-2018, 05:10 PM

In BIOS: adjust offset vcore to @Jurrunio recommended

ValentxD

06-16-2018, 05:10 PM #4

In BIOS: adjust offset vcore to @Jurrunio recommended

BlueBaery
Member

229

06-16-2018, 05:36 PM

Real-time management offers immediate adjustments, though software can often be less stable

BlueBaery

06-16-2018, 05:36 PM #5

Real-time management offers immediate adjustments, though software can often be less stable