New PC Build Not Live
New PC Build Not Live
I just completed my second PC build. The first one had only minor problems, but now on the first boot I’m not seeing anything on the monitor. I’ve tried updating the latest motherboard BIOS and using QFlash on the board (not sure if it worked), but it didn’t help.
Components used:
Corsair 4000d Airflow
Corsair H100 AIO + 3 case fans
Corsair RM650 80 Plus Gold
Gigabyte B550M AUROS Elite (rev 1.3)
AMD Ryzen 5 5600X
Samsung 970 EVO Plus 1TB M.2
Crucial Pro DDR4 64GB Kit
ASUS PCE-AX58BT Wi-fi 6 PCIe Adapter
Additional parts:
Cable Matter 1->5 fan header splitter
Rocketek 1->2 USB header splitter
Everything is plugged in securely and all items are new. I’m not planning to install a dedicated GPU since this build is for my parents who don’t need much graphics power. Any advice would be really appreciated.
You must know that your 5600x lacks an integrated graphics processor.
You might also consider bringing back the CPU and opting for a Ryzen 5 4500G, 5600G or 5700G.
Yeah it's possible. I've now driven two hours away from where I left the CPU box to finish the build. That would be a big challenge. Likely I'll just go ahead and buy the 1660 super used for a bit over £100. Looking back, this would definitely have bought the 5600g. I didn't really plan it at the time since for my first build I went all-in on the best kit with a GPU.
You could easily obtain a model similar to a GT 1030 GPU if you're looking to cut costs.
It looks like a good fit for their requirements, though I need to remind myself this isn't right for me.
😀
I placed the order just five minutes after you said it, thanks. It turns out I made some bad choices when picking parts. I should have gotten a motherboard that included a Wi-Fi adapter, a CPU with an integrated GPU, and an AIO without a fan or RGB hub. Fingers crossed I won't repeat the same mistakes next time.