F5F Stay Refreshed Hardware Desktop New ITX construction DRAM failed after installation, but DIMMS works well.

New ITX construction DRAM failed after installation, but DIMMS works well.

New ITX construction DRAM failed after installation, but DIMMS works well.

Z
ZibbL
Member
71
12-26-2016, 12:49 PM
#1
Hello! I’m an IT support teacher for high school students with around two years of experience assembling and maintaining custom PCs. We began an ITX build using these parts: Asterisk from a functioning PC, ESD precautions applied, and no visible damage or debris. All connections look intact. We initiated the BIOS setup from the "On the box" stage. The first attempt at booting failed due to a DRAM LED error. After reseating the RAM, the system started again. When power was cut and the GPU connected, the POST remained unstable, repeatedly showing a DRAM LED failure. I inspected each DIMM individually and removed the GPU without resolving the issue. ASUS support confirmed my RAM wasn’t listed as compatible. I’ve ordered a replacement kit from G.Skill (RipJaws V Series, 16GB, DDR4 3200 CL16-18-18-38), but I couldn’t locate it using their ASUS query tool. It appears the recommended RAM is highly specific to certain models and may no longer be produced or too costly for older variants. I’m unsure what to do next, especially if the new RAM doesn’t fit. I want to confirm if I missed something obvious, but I feel confident in my efforts so far.
Z
ZibbL
12-26-2016, 12:49 PM #1

Hello! I’m an IT support teacher for high school students with around two years of experience assembling and maintaining custom PCs. We began an ITX build using these parts: Asterisk from a functioning PC, ESD precautions applied, and no visible damage or debris. All connections look intact. We initiated the BIOS setup from the "On the box" stage. The first attempt at booting failed due to a DRAM LED error. After reseating the RAM, the system started again. When power was cut and the GPU connected, the POST remained unstable, repeatedly showing a DRAM LED failure. I inspected each DIMM individually and removed the GPU without resolving the issue. ASUS support confirmed my RAM wasn’t listed as compatible. I’ve ordered a replacement kit from G.Skill (RipJaws V Series, 16GB, DDR4 3200 CL16-18-18-38), but I couldn’t locate it using their ASUS query tool. It appears the recommended RAM is highly specific to certain models and may no longer be produced or too costly for older variants. I’m unsure what to do next, especially if the new RAM doesn’t fit. I want to confirm if I missed something obvious, but I feel confident in my efforts so far.

Y
YaBoiNitro
Junior Member
7
12-27-2016, 10:32 PM
#2
Ryzen remains selective about RAM even after many years. I’d consider a different CPU if one is available. If the new RAM order fails, I’d likely rely on what’s listed in their QVL. I might need to search for used options. Welcome to the forum.
Y
YaBoiNitro
12-27-2016, 10:32 PM #2

Ryzen remains selective about RAM even after many years. I’d consider a different CPU if one is available. If the new RAM order fails, I’d likely rely on what’s listed in their QVL. I might need to search for used options. Welcome to the forum.

H
hakan10
Member
54
12-27-2016, 10:38 PM
#3
I've never come across the idea of swapping a motherboard to trigger a conflict between a CPU and RAM setup that was functioning before. Thanks for the guidance. My R7 5800X3D arrived today, so I plan to run a POST test tomorrow using that CPU.
H
hakan10
12-27-2016, 10:38 PM #3

I've never come across the idea of swapping a motherboard to trigger a conflict between a CPU and RAM setup that was functioning before. Thanks for the guidance. My R7 5800X3D arrived today, so I plan to run a POST test tomorrow using that CPU.

G
GhoStPvpSlay3r
Junior Member
27
01-09-2017, 05:50 AM
#4
G
GhoStPvpSlay3r
01-09-2017, 05:50 AM #4

T
Tuetme
Senior Member
418
01-10-2017, 11:26 PM
#5
It seems I picked up a tip here. I tackled the issue by adding the Ryzen 7 5800X3D and updating the latest BIOS. Everything is working now. Just need to tidy things up, but I feel confident. Perhaps this will let me hit 300 fps in Old School Runescape. A man can dream.
T
Tuetme
01-10-2017, 11:26 PM #5

It seems I picked up a tip here. I tackled the issue by adding the Ryzen 7 5800X3D and updating the latest BIOS. Everything is working now. Just need to tidy things up, but I feel confident. Perhaps this will let me hit 300 fps in Old School Runescape. A man can dream.

B
Benny_Boy679
Member
217
01-11-2017, 07:14 AM
#6
Haha yeahhh. When I got my 5900 I made sure to use the same RAM it came with and things were a bit tricky with the motherboard; one thing for sure, I wouldn't buy an AMD board without USB BIOS flashing. It would have been a mess. It's frustrating that AMD can't offer CPUs with better memory support. Enjoy
B
Benny_Boy679
01-11-2017, 07:14 AM #6

Haha yeahhh. When I got my 5900 I made sure to use the same RAM it came with and things were a bit tricky with the motherboard; one thing for sure, I wouldn't buy an AMD board without USB BIOS flashing. It would have been a mess. It's frustrating that AMD can't offer CPUs with better memory support. Enjoy