F5F Stay Refreshed Hardware Desktop New hardware is causing games to crash.

New hardware is causing games to crash.

New hardware is causing games to crash.

J
Jake_TheDoge
Member
207
06-28-2023, 04:05 AM
#1
I bought a nearly brand-new system with R7 7700 Corsair 6000MHz RAM, RTX 4070TI and MSI Pro B650M board. I reinstalled Windows because some games were unstable, especially The Last of Us and Red Dead Redemption 2. After the update, the games ran okay for a couple days before crashing again. I checked CrystalDiskInfo and everything looks normal on the drives. Running SFC /scannow fixed some issues, even though it’s a three-day-old install. I’m unsure what’s causing the crashes or which parts might be the problem. Please help me figure it out. Smile
J
Jake_TheDoge
06-28-2023, 04:05 AM #1

I bought a nearly brand-new system with R7 7700 Corsair 6000MHz RAM, RTX 4070TI and MSI Pro B650M board. I reinstalled Windows because some games were unstable, especially The Last of Us and Red Dead Redemption 2. After the update, the games ran okay for a couple days before crashing again. I checked CrystalDiskInfo and everything looks normal on the drives. Running SFC /scannow fixed some issues, even though it’s a three-day-old install. I’m unsure what’s causing the crashes or which parts might be the problem. Please help me figure it out. Smile

A
116
06-28-2023, 04:41 AM
#2
Did you turn on expo in BIOS? It might be causing memory issues. Fast boot status could be affected too—make sure it's enabled in BIOS as well.
A
Assassin_AndyZ
06-28-2023, 04:41 AM #2

Did you turn on expo in BIOS? It might be causing memory issues. Fast boot status could be affected too—make sure it's enabled in BIOS as well.

F
Frinex10
Posting Freak
806
07-13-2023, 01:02 AM
#3
Execute memtest to verify RAM stability, allowing it to complete multiple full cycles. If any errors appear early, the system is likely unstable.
F
Frinex10
07-13-2023, 01:02 AM #3

Execute memtest to verify RAM stability, allowing it to complete multiple full cycles. If any errors appear early, the system is likely unstable.

M
Maisiemoo12
Member
154
07-13-2023, 08:57 AM
#4
Memtest completed successfully with no issues across all four runs. Fast boot is disabled in the BIOS, and I’ve switched it off via Windows power settings.
M
Maisiemoo12
07-13-2023, 08:57 AM #4

Memtest completed successfully with no issues across all four runs. Fast boot is disabled in the BIOS, and I’ve switched it off via Windows power settings.

P
159
07-13-2023, 10:04 AM
#5
You've set up chipset and GPU drivers, and checked CPU and GPU stability. If needed, proceed with DDU to remove old GPU drivers before installing new ones.
P
pocketchicken1
07-13-2023, 10:04 AM #5

You've set up chipset and GPU drivers, and checked CPU and GPU stability. If needed, proceed with DDU to remove old GPU drivers before installing new ones.

B
Bring_It
Senior Member
423
07-13-2023, 03:00 PM
#6
No issues detected. No BSODs or errors observed.
B
Bring_It
07-13-2023, 03:00 PM #6

No issues detected. No BSODs or errors observed.