New hardware for Windows 11?
New hardware for Windows 11?
It would have needed to sit for a very long time thinking about how much longer the 5xxx line had been down.
I just checked the ASRock B450M I'm using with a 2600 and Linux. The 5600X worked with a 2020 BIOS, while the 5700X needed a 2021 BIOS.
Thanks for all the ideas, using an AMD 5600 with a B450 motherboard is a great affordable choice that lets me keep my RAM in. The 'MSI B450 GAMING PLUS MAX' board has the red colors that match my RAM sticks, so it should work well. From what I found, the 5600 is roughly £20 cheaper than the 5600X, so I think I'll go with the more budget-friendly version. Is the stock cooler included enough to handle the workload?
@SkyNetRising
I don’t have any brackets for the Cryo H7 cooler, not sure where I could buy one.
Could you also suggest some decent affordable cases, in case I want to replace my old one? That would mean a bit more spending. Ideally, it should have a disc drive slot since my PC still has one.
Edit
: Is the Fractal Design Focus G - Mid Tower suitable?
I found via task manager that my RAM is listed at 2133mhz. According to Google, "While an AMD Ryzen 5 5600 processor can technically function with 2133MHz RAM, it's generally not recommended. The processor is designed for faster RAM speeds, and using slower RAM will cause a performance bottleneck. For optimal performance, forums suggest using RAM that runs at 3200MHz or even 3600MHz." So it seems I might need to replace my RAM.
2133MT/s represents the standard (JEDEC) rate at which many DDR4 DIMMs begin to operate before you experiment with XMP/EXPO/DOCP overclocking. This setting is designed to maintain stability during initial system boot. The specifications for the 5600 on CPU World indicate DDR4-3200 support, and you should generally reach speeds of 3600MT/s or higher, though this isn't guaranteed, particularly with multiple DIMMs installed.
For more details, refer to the page: https://www.cpu-world.com/CPUs/Zen/AMD-Ryzen 5 5600.html
Regarding memory controllers, the total channels available are 2, and the supported memory type is DDR4-3200. ECC support is available. This configuration gives you flexibility; if gaming is your priority, investing in newer RAM could be worthwhile.
In my experience building a system with the 7950X in 2022, high-speed DDR5 was not financially feasible, so I opted for two 32GB modules at 4800MT/s. Today, you would likely achieve at least 6,000MT/s with DDR5. However, improvements in RAM speed have minimal impact on certain AMD processors—such as the DaVinci Resolve video editor, which does not see significant gains (see the chart below).
For case-related insights, I own several Fractal Design R4 and R5 chassis. When selecting a case, pay close attention to the 5.25-inch front panel bays among the various options. Some models include removable cradles for at least eight hard drives, which is beneficial for server configurations.
When considering using your DDR4 memory on AMD systems, it's important to ensure compatibility.
Memory is closely linked to AMD processors.
Visit the motherboard website and check their RAM compatibility list, as it differs depending on the processor.
For safety, make sure your memory model appears in the QVL list; other options may also function.
Your memory supplier should provide a support app for verification.
If you're replacing the i5-12600K or B760 boards, consider using an i3-13100 or i5-12400 instead.
These alternatives typically include proper cooling solutions and offer better performance than your 6600K