new guide for connecting a Wi-Fi 6 router with a mesh network setup
new guide for connecting a Wi-Fi 6 router with a mesh network setup
Hello, I need some guidance on choosing a router and mesh network setup. My current device is an older Asus RT-AC87U. I noticed Netgear offers the Nighthawk series, like the RAX200 Router AX1100 Wi-Fi 6 and the AX12 with a tri-band option. They’re also planning a Nighthawk Mesh model, such as the MK62 Asus ROG Rapture GT-AX11000. I’m unsure if this will be worth it despite the price, especially since I usually go for gaming routers mainly for marketing reasons. The Netgear models I saw didn’t have one. For Asus, I’m leaning toward sticking with their existing lineup. I’m open to suggestions and advice on what router and mesh system would work best, not just for these two, but generally. Thanks for your help—I know my English isn’t perfect, but I appreciate any tips!
You aim to adopt WiFi 6 because it offers faster speeds and better performance. Your devices support its benefits, and you prefer a mesh network for seamless coverage over multiple access points.
WiFi 6e is on the horizon, not the final standard yet. It offers enhancements that definitely boost performance.
Legacy devices still gain from WiFi 6, particularly with MU-MIMO capabilities—most modern routers already include this feature.
Access points can be wired, which significantly strengthens a wireless mesh network regardless of the underlying technology. For ASUS systems, the AI Mesh feature lets you connect any supported router into a unified mesh, even different models.
Top routers from Netgear and ASUS will remain constrained by their speed potential until additional nodes are added. WiFi also struggles to penetrate dense concrete structures, especially when rebar is present.
I planned the setup by selecting specific wireless APs and configuring their connections. The wiring and positioning were tailored for reliability. Mesh networks aren’t always effective in areas with thick walls; performance still depends on standard WiFi. You might find ads promoting mesh systems targeting homes with multi-level construction, often featuring wood interiors. In regions with concrete or steel walls, these setups may not function identically. If you’re referring to a pub or bar setting, it’s important to isolate your network so guests can browse the internet without compromising your internal devices and shared resources.
Sfortunatamente vivo in Italia, e le case qui sono costruite con cemento armato
You might consider moving to a hardwired solution, though it requires drilling holes in the structure. Thick reinforced concrete makes WiFi travel difficult, especially on the 5GHz band. If you opt for a new router, you'd get better speed and coverage, but it would be limited to indoor use and wouldn't penetrate through solid walls effectively.
For dependable coverage in big homes with thick concrete or brick walls, the best approach is to install several small access points connected to the main router or switch. The exact model doesn’t matter as long as they’re set up in AP mode. Focus on getting what fits your budget. Also consider features like dual-band support (2.4GHz and 5GHz), wireless-AC/AX compatibility, MU-MIMO, multi-stream capability, and gigabit Ethernet ports.