New build!!! Red dramatic LED.
New build!!! Red dramatic LED.
New Build
Motherboard: Aorus B650 Elite Ax Ice
CPU: AMD Ryzen 5 8600G
CPU Cooler: AMD Stealth Wraith Cooler
Ram: Corsair Vengeance DDR5 intel XMP Ready 32 GB 5600MHz
CMK32GX5M2B5600C40
GPU: XFX AMD Radeon RX 580 GTS Edition 8GB
PSU: Evga 750BP 80+ bronze 750w
Was originally having a issue with the mobo taking the Qflash to F20mfor the latest Bios update. Nothing was working to get it to flash. it would just power on the cpu led and then cut off in less then 2 seconds. Came own to formating my Flashdrive to NTFS due to not having FAT32 and the FAT32 drive i have wouldnt work when trying it. After i got the QFlash to work i then assembled the mobo and powered it on, (all outside the case still) i get no display, and the Dram Red LED is on and solid. When you power it on it will light up the Cpu red for a second then straight to DRAM red led and remains.
I have reseated every component in the system multiple times, ive moved the ram around every way possible including without any ram in the mobo. ive swapped to a 500w evga power supply, ive put another working gpu in and still got no display, no post, nothing.
Im lost on what to do. Help recommendations would be awesome.
Check the CPU socket for any bent or broken pins. You should be able to get display output from your breadboarded system while using just the APU (meaning you can skip the discrete GPU). Are the RAM slots A2 and B2? How is the APU being cooled in your build?
Originally, there was a problem with the motherboard not accepting the Q-flash for the latest BIOS update. The current BIOS version is F22b. You can find more info here: https://www.gigabyte.com/Motherboard/B65...rt-dl-bios. It might be helpful to follow this guide: https://www.youtube.com/watch?v=7cQLYROKJ_Q
The APU is cooled using the Stock AMD Cooler, and the CPU came with it.
I've attempted several times to start the system and see if it displays from the APU without a GPU, or with a GPU connected but plugged into the APU.
I updated the BIOS to F21 because I was advised that F22b is a beta version and might cause issues with the motherboard or other components.
I'll follow up once I have confirmation about the flash and try booting again.
Bios version updated to F22b. Device powered on with identical status. Initiated with Red Dram input but failed to boot. Connected to display via HDMI and APU through Display Port. No changes detected.
Also allocated time for checking the RAM by the system. Spent multiple hours waiting to confirm if the module would read the RAM. Replaced it and returned the original RAM, which worked just like the two new ones.