New build PC experiences sluggish performance on ASUS-PCEAC51
New build PC experiences sluggish performance on ASUS-PCEAC51
Hey, your new PC's connection speed is really slow right now—about 10.80Mbps for downloads, which is way below what you expect. Your old laptop would handle it much better, around 60Mbps. You've already checked drivers, moved the antenna, even adjusted the case to see if that helps. It's frustrating. What you're facing is quite common with older hardware paired with newer specs. Consider upgrading your network card or checking for firmware updates to improve performance.
The path from data to network company, cable, house, and finally to the computer can stretch over many stages. It may not stop at only one point. Or it could extend further.
Checking both local WiFi and LTE connections works. The phone runs a different operating system and uses different hardware, but the card supports 2GHz and 5.1GHz. You can determine the router’s protocol by looking at the connection details—everything is backward compatible, so it might be switching to an unusual setting like A.
In fact, numerous factors might be involved. Are you connected to a 2.4 or 5.0 GHz network? How close are you to the router? If your phone experiences faster speeds, have you attempted to turn it into a hotspot and connect from there to check for improvements? Which channel is your WiFi operating on? It might be a crowded channel with interference. Consider switching the WiFi channel on your PC's Wi-Fi card. Have you tried connecting a cable directly to the router to test speed changes? If your PC has adjustable antennas, try moving them away from the device and up higher. There are many possibilities... But I recommend starting with a wired connection to confirm your new hardware is functioning properly. If you notice improved speeds, proceed with the other suggestions I mentioned.
There are various Wi-Fi standards available. Not every device works the same way. The latest models usually match older ones in performance. They often aim to connect using the strongest link they can find. However, this isn’t always the case. The specific hardware and protocols each device employs might influence the outcome.
Agreed, but if this is a home Router, there is only one 802.a/b/g/h/ax. Depending on the age of the router, the best bet would be 802.11h, but they are all still 802.11x, so in a way there are NOT many WiFi protocols, it is flavors of the same 802.11. He should do a direct wired connection for testing. The distance between the router and the receiver will matter as well.