New build: motherboard QLEDs moved to DRAM, then VGA, finally BOOT?
New build: motherboard QLEDs moved to DRAM, then VGA, finally BOOT?
So this is kind of a long story.
I just built the PC, and I connected everything securely and when I turn on the PC it doesn't provide any output to the monitor, and the keyboard doesn't light up, then the motherboard QLED displayed a yellow DRAM light.
I removed 1 RAM stick and put the second one in the 2nd slot, then the VGA QLED flashed yellow (it stayed on VGA) and the keyboard worked, but was not responsive (still no output to the monitor)
I had to switch the GPU to the other Slot, and turned on the PC again, and this time the Boot QLED flashed yellow.
I updated the motherboard using a USB flash drive, and still the same issue.
Please help me out, cuz I looked everywhere and tried almost everything, but no luck.
Specs:
ASUS ROG STRIX NVIDIA RTX 4070 TI
intel I7-14700kf
ASUS ROG Strix 1000w PSU gold
corsair Vengeance 64 gb (32 x 2 ) 6600 MHZ
Welcome to the forums, newcomer!
Removed one RAM stick and inserted the second one into the second slot.
Please note the make and model of your motherboard. Also, your motherboard has labels for the RAM slots. Follow that the RAMs are filling slots A2 and B2.
Intel I7-14700kf – what cooling solution are you using for that processor?
Sorry, it's z790 aorus elite ax motherboard.
I put the rams in a2 and be, yet I got dram led. The I removed one of them and put the other in a2. The the dram led turned off, but the Vga led turned on. Then I switched the GPU to a different port, then the vga light turned off, but the boot led turned on.