Networking utilized Enterprise Access Point
Networking utilized Enterprise Access Point
I’m looking into options for used enterprise-grade access points or discounted units that could work well in a home network. Right now, I’m using 200 Mbps cable at a 1200 AC router with DD WRT settings. The signal isn’t strong enough due to many competing Wi-Fi signals. My router is fixed in a bedroom and can’t be moved easily. I plan to relocate it to the front of the room once I cut the existing coaxial cable into my cable box. I also intend to move the Wi-Fi router there for better coverage.
I’m considering adding a used Cisco access point in the middle of the apartment, ensuring Power over Ethernet (PoE) support. This would require only one cable since there’s no power outlet nearby. If my current space has more than 20 networks, it could weaken the signal between the bedroom and the front area. For reliable connections—especially if I switch to devices like Amazon Fire Sticks or Roku boxes—I’d need a stable setup. Any advice would be appreciated?
Ubiquity stands out as the top choice for most scenarios. For Cisco AP deployments, thorough preparation is essential.
I rely on Ubiquiti equipment in my home, mainly the AP-AC-LR. If you reside in an apartment, expect significant network traffic on the airwaves, so I recommend starting with the Wifiman app from Ubiquiti to check which channels your neighbors are using and adjusting yours to the least busy one. If that doesn’t resolve the problem, consider a compact Ubiquiti Unifi setup. Two AP-AC units should suffice for an apartment, but ensure both are wired to avoid airtime congestion from multiple networks. Here’s a helpful guide from Troy Hunt on planning, installing, and configuring a Unifi network from the ground up.
I thought this was what I needed to do due to the network congestion. By the time the Wi-Fi signal arrives at the front of my apartment, it weakens.