Need help with UPS
Need help with UPS
Hi,
I recently purchased a UPS model Mercury Elite 2200u, with specifications of 2200uVA and 1320W. I have a single wall outlet for my setup, using power strips to connect devices and charge my PC, which draws about 1000W, along with two monitors. Due to frequent power outages in my area, I wanted a UPS that would safeguard my PC and allow me to shut down safely. My current arrangement uses one power strip for the PC and monitors, then connects it to another power strip that includes a fan and lamp. Can I connect both power strips to the UPS, or will this cause any issues?
You understood your UPS manual, didn't you?
Because then you should realize that using any kind of power strips is absolutely prohibited with a UPS.
With a UPS, the setup is straightforward;
Code:
- monitor
Wall - UPS - monitor
- PC
A desk lamp and floor fan aren't required to be connected to the UPS. When power fails, the purpose of the UPS is to allow you to save your work and shut down your PC safely.
UPS isn't a power bank that can be used freely as long as its battery remains functional. If you need one, consider a gasoline/diesel generator that generates electricity when main power is unavailable.
Also, keep in mind that if you have a cheap simulated sine wave UPS, it might not work effectively during an outage. Simulated sine wave models aren't compatible with Active PFC PSUs (your PSU uses). Only genuine pure sine wave UPSes are suitable for PC PSUs. For example, the CyberPower CP1300EPFCLCD is one I own.