F5F Stay Refreshed Hardware Desktop Need assistance with overclocking? Let me help you optimize your performance.

Need assistance with overclocking? Let me help you optimize your performance.

Need assistance with overclocking? Let me help you optimize your performance.

A
AmeliaLynz
Junior Member
32
05-28-2017, 08:40 PM
#1
You're exploring CPU overclocking and wondering if it'll help your gaming performance. With an 8700K running stock, overclocking could potentially boost speeds, but it depends on your specific setup. The graphics card is already decent, so you might not need to overclock it unless you want extra gains. Your current cooling setup is a bit limited, so airflow matters. If you're open to tips, look for guides that match your hardware and goals.
A
AmeliaLynz
05-28-2017, 08:40 PM #1

You're exploring CPU overclocking and wondering if it'll help your gaming performance. With an 8700K running stock, overclocking could potentially boost speeds, but it depends on your specific setup. The graphics card is already decent, so you might not need to overclock it unless you want extra gains. Your current cooling setup is a bit limited, so airflow matters. If you're open to tips, look for guides that match your hardware and goals.

K
Kev67824
Member
209
05-29-2017, 04:50 AM
#2
I’m planning to invest the extra funds into a K SKU CPU and a Z series motherboard just for the purpose of overclocking. For a simple overclock, focus mainly on core voltage and frequency. If you’re just starting out, aim for around 4.6 volts across all cores and gradually increase from there.
K
Kev67824
05-29-2017, 04:50 AM #2

I’m planning to invest the extra funds into a K SKU CPU and a Z series motherboard just for the purpose of overclocking. For a simple overclock, focus mainly on core voltage and frequency. If you’re just starting out, aim for around 4.6 volts across all cores and gradually increase from there.

W
WildcatCub203
Junior Member
31
05-30-2017, 01:37 PM
#3
CPU tuning is surprisingly straightforward, no humor here. Core settings adjusted to 50x, v-core boosted to 1.35v for stability. GO!
W
WildcatCub203
05-30-2017, 01:37 PM #3

CPU tuning is surprisingly straightforward, no humor here. Core settings adjusted to 50x, v-core boosted to 1.35v for stability. GO!

_
_zaphire_
Member
198
05-30-2017, 07:57 PM
#4
Turn on X.M.P in the BIOS if you haven’t already configured an all-core multiplier of 50. (CPU RATIO) When using AVX, set the CPU ratio offset to 0. For fixed mode, apply CPU ratio: all cores. Adjust the manual vcore between 1.25 and 1.35—start at 1.32. Locate the Load line calibration settings under DigitALL power and raise the Load line calibration control to level 5.
_
_zaphire_
05-30-2017, 07:57 PM #4

Turn on X.M.P in the BIOS if you haven’t already configured an all-core multiplier of 50. (CPU RATIO) When using AVX, set the CPU ratio offset to 0. For fixed mode, apply CPU ratio: all cores. Adjust the manual vcore between 1.25 and 1.35—start at 1.32. Locate the Load line calibration settings under DigitALL power and raise the Load line calibration control to level 5.

P
Pipper1222
Member
187
06-02-2017, 11:29 AM
#5
Since both of you suggested setting the core multiplier to 50, I'll begin there and observe the results. Thanks!
P
Pipper1222
06-02-2017, 11:29 AM #5

Since both of you suggested setting the core multiplier to 50, I'll begin there and observe the results. Thanks!

E
EmissaryZ
Member
112
06-02-2017, 08:45 PM
#6
It’s hard to deny the value of understanding what you’re working with. I increased my overclock just to see how much performance it could achieve and would have gotten better AMD components. I’m hoping this will improve things compared to the default settings. I followed the same steps as before—let the board auto-overclock first, then tried a manual setting of 50x and 1.35.
E
EmissaryZ
06-02-2017, 08:45 PM #6

It’s hard to deny the value of understanding what you’re working with. I increased my overclock just to see how much performance it could achieve and would have gotten better AMD components. I’m hoping this will improve things compared to the default settings. I followed the same steps as before—let the board auto-overclock first, then tried a manual setting of 50x and 1.35.

F
fruitypie121
Member
64
06-07-2017, 08:47 PM
#7
Almost every 8700k model can reach 4.9GHz at 1.35 volts. This boost is quite advanced, so proceed only if you're sure your cooling system can handle it. Many processors work well below this threshold, making it a solid baseline. Yes, even without overclocking your 2080, you'll notice a noticeable improvement in 1080p gaming for competitive titles.
F
fruitypie121
06-07-2017, 08:47 PM #7

Almost every 8700k model can reach 4.9GHz at 1.35 volts. This boost is quite advanced, so proceed only if you're sure your cooling system can handle it. Many processors work well below this threshold, making it a solid baseline. Yes, even without overclocking your 2080, you'll notice a noticeable improvement in 1080p gaming for competitive titles.