Need assistance with messy adhesive in your second dimmer outlet.

F5F Stay Refreshed Hardware Desktop Need assistance with messy adhesive in your second dimmer outlet.

243

03-19-2016, 02:11 AM

I was attempting to fix something above the motherboard, and the process succeeded except for some unexpected glue seeping into the DIMM_B1 port. After taking out the DIMM, I tried scraping it with a spudger, but it looks like some adhesive remains, preventing detection of the second DIMM. I’m considering using a Q-Tip to apply acetone to dissolve it. For this attempt, I plan to remove the motherboard first for better access. Should acetone impact other components? Given the $400 cost, I’d rather avoid replacing it unless absolutely needed. I also checked DIMM_A2, but Asus states it won’t work unless both DIMM_A1 and B1 are active. Thanks in advance.

SuperMarioDXB

03-19-2016, 02:11 AM #1

digayo
Junior Member

03-19-2016, 04:27 AM

Cyanoacrylate typically uses acetone as a base, but acetone can damage ABS components. It looks like other solvents that work on cyanoacrylate also affect ABS.

digayo

03-19-2016, 04:27 AM #2

Cyanoacrylate typically uses acetone as a base, but acetone can damage ABS components. It looks like other solvents that work on cyanoacrylate also affect ABS.

mj18wals
Senior Member

256

03-19-2016, 02:34 PM

I aim to find and grasp the problem. Likely adding a metal connection. Once precise, you might attempt to remove the adhesive or apply acetone carefully. If unclear, your odds decrease. (Could you provide a clear image?) Edited May 11, 2025 by leclod

mj18wals

03-19-2016, 02:34 PM #3

TransHailey
Member

03-21-2016, 01:57 AM

Isopropyl Alcohol can't melt glue, but it will break it apart and reduce its strength—this might assist in cleaning without harming surfaces.

TransHailey

03-21-2016, 01:57 AM #4

Isopropyl Alcohol can't melt glue, but it will break it apart and reduce its strength—this might assist in cleaning without harming surfaces.