Need assistance! I encountered an issue with my new system.

Shandy_
Member

223

04-18-2016, 07:50 PM

I own a fresh Asus Crosshair VIII equipped with a new 5900 chip. I had already updated the BIOS prior to setting up the motherboard components. The process completed without issues. After installing the new chip and remaining hardware, I encountered a posting error labeled '0d.' This message isn't mentioned in the documentation. I'm currently trying to reinstall the most recent BIOS.

Shandy_

04-18-2016, 07:50 PM #1

Wiicarbon
Member

234

04-23-2016, 08:34 AM

Yes, it fits into slots 2 and 4.

Wiicarbon

04-23-2016, 08:34 AM #2

Yes, it fits into slots 2 and 4.

DantehIsGay
Posting Freak

902

04-23-2016, 08:43 PM

All 4

DantehIsGay

04-23-2016, 08:43 PM #3

All 4

cfmitch
Junior Member

04-24-2016, 01:04 AM

Inspect the diagnostic LEDs on the boards. Does the RAM light also illuminate in orange? Od typically indicates a RAM problem. You have four sticks; remove three and leave one in slot 2, then attempt again.

cfmitch

04-24-2016, 01:04 AM #4

Sertero28
Senior Member

589

04-24-2016, 02:14 AM

reseat ram

Sertero28

04-24-2016, 02:14 AM #5

reseat ram

Si0neR
Member

235

04-24-2016, 10:43 AM

one stick is connected and it's working. The post code has changed to 02, but I don't have the video signal anymore. I'm using my old 560 with a DVI out.

Si0neR

04-24-2016, 10:43 AM #6

one stick is connected and it's working. The post code has changed to 02, but I don't have the video signal anymore. I'm using my old 560 with a DVI out.

MeltedMarsBarr
Member

04-25-2016, 07:05 PM

Choose between Nvidia or AMD 560.

MeltedMarsBarr

04-25-2016, 07:05 PM #7

Choose between Nvidia or AMD 560.

jellyThePro
Member

105

04-25-2016, 08:53 PM

I own a 1060 in my current setup, just getting it ready to verify everything functions properly before replacing the existing one. This is the sole spare card I possess.

jellyThePro

04-25-2016, 08:53 PM #8

I own a 1060 in my current setup, just getting it ready to verify everything functions properly before replacing the existing one. This is the sole spare card I possess.

DRV111
Member

147

04-25-2016, 11:23 PM

Thank you for the tips. Everything is functioning properly now.

DRV111

04-25-2016, 11:23 PM #9

Thank you for the tips. Everything is functioning properly now.