Need assistance?

193

02-22-2018, 07:03 AM

Hello, I just upgraded my RAM to a 2x 8GB 3600Mhz Corsair Vengeance RGB. Everything works well after booting up and posting, but I still experience blue screens or crashes during games about once a day. This wasn’t an issue before the RAM change. Some people recommended resetting the CMOS. What are your thoughts? Motherboard-B450F Strix Ryzen 5 2600x

IIGuiGalouLT

02-22-2018, 07:03 AM #1

RCVincnet
Member

02-22-2018, 08:17 AM

You're using Ryzen, so you might need to boost the RAM voltage a bit for better stability, particularly with high-speed builds.

RCVincnet

02-22-2018, 08:17 AM #2

You're using Ryzen, so you might need to boost the RAM voltage a bit for better stability, particularly with high-speed builds.

StyleTrick
Senior Member

744

02-23-2018, 02:27 PM

Slots 2 and 4 are available. The docp is enabled. Voltage at 1.35 is confirmed.

StyleTrick

02-23-2018, 02:27 PM #3

Slots 2 and 4 are available. The docp is enabled. Voltage at 1.35 is confirmed.

trincat11
Member

168

02-23-2018, 03:00 PM

Are you sure your BIOS is current? Even the manual lists a maximum speed of 3466, which doesn't match your kit. With your part number CMW16GX4M2Z3600C18, it doesn't appear at all. This isn't a big deal right now, but I'm worried the RAM speed might cause issues. Consider lowering it. B450-F Gaming RAM QVL

trincat11

02-23-2018, 03:00 PM #4

mumustrak
Senior Member

729

02-23-2018, 11:35 PM

I experienced this repeatedly over time. Each time I restarted, I accessed the BIOS and reset everything back to defaults. I performed this daily to prevent problems, and after a week it worked smoothly without needing BIOS access.

mumustrak

02-23-2018, 11:35 PM #5