F5F Stay Refreshed Hardware Desktop Need advice on system

Need advice on system

Need advice on system

T
TommyHU3_
Member
153
06-16-2023, 01:32 AM
#1
Hello, your new system is working fine so far, but when you restart or boot up, it takes a long time before it starts functioning properly. This isn’t unusual. Also, your SSD seems to occasionally struggle with loading files. The specs are: 7800x3d, 4090, 64GB, 6000mhz, running Windows 11.
T
TommyHU3_
06-16-2023, 01:32 AM #1

Hello, your new system is working fine so far, but when you restart or boot up, it takes a long time before it starts functioning properly. This isn’t unusual. Also, your SSD seems to occasionally struggle with loading files. The specs are: 7800x3d, 4090, 64GB, 6000mhz, running Windows 11.

A
Avidelux
Junior Member
42
06-30-2023, 02:47 AM
#2
The system seems to be struggling with the motherboard, possibly relearning its memory each time it boots. A BIOS adjustment might resolve this issue. It depends on the specific motherboard model.
A
Avidelux
06-30-2023, 02:47 AM #2

The system seems to be struggling with the motherboard, possibly relearning its memory each time it boots. A BIOS adjustment might resolve this issue. It depends on the specific motherboard model.

U
UltraSpace
Member
81
07-07-2023, 04:47 AM
#3
My bad motherboard is an MSI MGP X670E Carbon WiFi
U
UltraSpace
07-07-2023, 04:47 AM #3

My bad motherboard is an MSI MGP X670E Carbon WiFi

T
ThatSoPatrick
Member
71
07-08-2023, 09:23 AM
#4
Would adjusting the bios configuration prevent system instability? I don’t know for sure.
T
ThatSoPatrick
07-08-2023, 09:23 AM #4

Would adjusting the bios configuration prevent system instability? I don’t know for sure.

E
Elkzuu
Junior Member
23
07-08-2023, 05:50 PM
#5
It seems to refer to enabling fast boot within the memory configuration, not the general PC boot process. Likely located in the advanced memory settings section of the BIOS.
E
Elkzuu
07-08-2023, 05:50 PM #5

It seems to refer to enabling fast boot within the memory configuration, not the general PC boot process. Likely located in the advanced memory settings section of the BIOS.

V
valentin1406
Member
73
07-09-2023, 06:15 PM
#6
I’ll check it out and hope it won’t cause any issues
V
valentin1406
07-09-2023, 06:15 PM #6

I’ll check it out and hope it won’t cause any issues

M
MaximePilgrim
Member
116
07-14-2023, 03:13 PM
#7
Some additional queries – is it acceptable that my components aren’t locking down during idle on the ATM? I’m not sure what’s causing it, but when idling at the desktop, both the CPU and GPU seem to stay at their top clock speeds without generating any heat.
My Lian Li Galahad LCD cooler has an RGB strip that doesn’t appear to function; could this be due to a loose connection or a dead strip?
I wasn’t able to mount my GPU vertically because it was pressing into the CPU cooler—this is really frustrating. But the main concern here is whether it’s normal for the anti-sag bracket to remain horizontal, as it doesn’t align properly and I might need to prop it up temporarily.
M
MaximePilgrim
07-14-2023, 03:13 PM #7

Some additional queries – is it acceptable that my components aren’t locking down during idle on the ATM? I’m not sure what’s causing it, but when idling at the desktop, both the CPU and GPU seem to stay at their top clock speeds without generating any heat.
My Lian Li Galahad LCD cooler has an RGB strip that doesn’t appear to function; could this be due to a loose connection or a dead strip?
I wasn’t able to mount my GPU vertically because it was pressing into the CPU cooler—this is really frustrating. But the main concern here is whether it’s normal for the anti-sag bracket to remain horizontal, as it doesn’t align properly and I might need to prop it up temporarily.

M
MrSarx
Senior Member
375
07-15-2023, 12:07 AM
#8
With the anti sag bracket, the GPU appears positioned very close to the surface. If you tried to place it higher, you'd need to push the card further up. What action should you take?
M
MrSarx
07-15-2023, 12:07 AM #8

With the anti sag bracket, the GPU appears positioned very close to the surface. If you tried to place it higher, you'd need to push the card further up. What action should you take?