My Custom Build Pc Won't Work

Milinia56
Member

231

04-19-2016, 09:37 AM

Hello, I just built a new PC and it doesn’t turn on or show anything on the screen. After plugging in the power supply and turning it on, the motherboard lights up and the power button LEDs activate, but everything stays off. Even after trying to press the power button multiple times, it doesn’t work. I’ve rewired several times to fix wiring issues—even checked the manuals—and everything looks correct. All components are compatible, and I’m using the backplate on the motherboard. Is there anything else that might be causing this? Please help.

Milinia56

04-19-2016, 09:37 AM #1

MAZ531
Member

164

04-19-2016, 10:08 AM

Consider checking the board beyond the case to exclude a short.

MAZ531

04-19-2016, 10:08 AM #2

Consider checking the board beyond the case to exclude a short.

Doc1928
Member

05-10-2016, 10:24 AM

Standoffs? RAM fully seated? Those are the most frequent problems.

Doc1928

05-10-2016, 10:24 AM #3

Standoffs? RAM fully seated? Those are the most frequent problems.

Jakobkrax
Member

189

05-12-2016, 01:35 AM

Check the power source:
https://www.youtube.com/watch?v=5FWXgQSokF4
Verify if the connected fan operates.

Jakobkrax

05-12-2016, 01:35 AM #4

Check the power source:
https://www.youtube.com/watch?v=5FWXgQSokF4
Verify if the connected fan operates.

vikkiii
Member

182

05-19-2016, 02:13 AM

I just checked the test for the power supply and it functioned properly. It also activated my fans. However, when I plug the 24 pin back into the motherboard it doesn't work.

vikkiii

05-19-2016, 02:13 AM #5

I just checked the test for the power supply and it functioned properly. It also activated my fans. However, when I plug the 24 pin back into the motherboard it doesn't work.

Keyaanoo
Junior Member

05-25-2016, 04:57 PM

Consider checking the board beyond the case to exclude a short.

Keyaanoo

05-25-2016, 04:57 PM #6

Consider checking the board beyond the case to exclude a short.

prokiller_nl
Junior Member

05-25-2016, 08:57 PM

Consider changing the orientation of the 2 pin power button connector, as reversing positive to negative might work in the image.

prokiller_nl

05-25-2016, 08:57 PM #7

Consider changing the orientation of the 2 pin power button connector, as reversing positive to negative might work in the image.