MW2 standards refer to guidelines for the medium water temperature.

VitoSEXY
Posting Freak

797

06-13-2021, 03:47 AM

Hi, I'm just starting with PC optimization and I'm looking for guidance. Some users mention they have older systems with similar settings but still achieve around 170 FPS. While 120 FPS is fine, I want to learn more about my hardware and why it feels CPU-intensive with a weak GPU.

VitoSEXY

06-13-2021, 03:47 AM #1

TheWheatherMan
Member

160

06-13-2021, 05:20 AM

The game demands a lot of CPU power, particularly during Invasion. The driver you're using conflicts with MW2, but a fix was released yesterday that resolves flashing and micro stuttering. https://nvidia.custhelp.com/app/answers/...ion-526.61 Benchmarks are poor for multiplayer, with performance fluctuating greatly based on mode and map. Consider skipping Ultra Performance DLSS.

TheWheatherMan

06-13-2021, 05:20 AM #2

DRGNdragsYT
Senior Member

723

06-13-2021, 06:08 AM

Three PCs produced different outcomes at 1080p with maximum settings. One ran on a 7950x display, another on a 5700g RTX3090, and the third used an A770 5900x with an RX6900xt.

DRGNdragsYT

06-13-2021, 06:08 AM #3

Three PCs produced different outcomes at 1080p with maximum settings. One ran on a 7950x display, another on a 5700g RTX3090, and the third used an A770 5900x with an RX6900xt.

Maffin_
Member

181

07-01-2021, 08:35 AM

I mentioned building this machine a few years back and added some CPU and GPU upgrades, but I’m aware it’s still running at its most basic level. I’m not sure which programs to install or if I need to configure the hardware properly in the BIOS.

Maffin_

07-01-2021, 08:35 AM #4

Polydash
Junior Member

07-01-2021, 09:28 AM

Your work is acceptable. The results look good when compared with my R9 3900X and RTX 3060ti at 1440p. I experience a bit lower FPS, and the GPU doesn’t reach full usage since the CPU often limits performance above 120 FPS.

Polydash

07-01-2021, 09:28 AM #5

Lyf
Junior Member

07-01-2021, 03:30 PM

Your CPU usage is high at 98%, while your GPU is barely active at 1%. This suggests the GPU might not be sufficient for your workload, or your CPU could be struggling under the load.

Lyf

07-01-2021, 03:30 PM #6

Your CPU usage is high at 98%, while your GPU is barely active at 1%. This suggests the GPU might not be sufficient for your workload, or your CPU could be struggling under the load.

samigurl0903
Senior Member

603

07-03-2021, 02:03 AM

Thanks for the details.

samigurl0903

07-03-2021, 02:03 AM #7

Thanks for the details.

Relo_273
Member

169

07-03-2021, 06:08 AM

The issue appears to be related to software. Your VRAM usage stays below 3.89GB, but at 1440p you should be using the full 8GB available. I mean, I can handle up to 8GB at 1080p.

Relo_273

07-03-2021, 06:08 AM #8

The issue appears to be related to software. Your VRAM usage stays below 3.89GB, but at 1440p you should be using the full 8GB available. I mean, I can handle up to 8GB at 1080p.

lauchax1998
Junior Member

07-16-2021, 09:23 PM

Do you have any suggestions on how to proceed?

lauchax1998

07-16-2021, 09:23 PM #9

Do you have any suggestions on how to proceed?