F5F Stay Refreshed Hardware Desktop MSI Z590 fails to start when using an SSD in the third M.2 port.

MSI Z590 fails to start when using an SSD in the third M.2 port.

MSI Z590 fails to start when using an SSD in the third M.2 port.

T
165
10-06-2023, 03:21 AM
#1
It might stem from a lack of enough PCIe lanes, usually seen when connecting an M.2 device to a PCIe slot. This is the first time I noticed RAM involved. Have you placed the SSD in different M.2 slots to check for issues? Try swapping it with another SSD into the third slot to see if the problem persists. A faulty M.2 drive could disrupt essential circuits and stop the system from starting. Let me know if this helps.
T
TechSoldierEx2
10-06-2023, 03:21 AM #1

It might stem from a lack of enough PCIe lanes, usually seen when connecting an M.2 device to a PCIe slot. This is the first time I noticed RAM involved. Have you placed the SSD in different M.2 slots to check for issues? Try swapping it with another SSD into the third slot to see if the problem persists. A faulty M.2 drive could disrupt essential circuits and stop the system from starting. Let me know if this helps.

D
DefenseGuard
Junior Member
12
10-06-2023, 03:21 AM
#2
Are there any disks connected to the SATA ports? According to your manual, SATA2 won’t work during installation of an M.2 SATA SSD in the M2_2 slot. **SATA5 and SATA 6 won’t function when installing an M.2 SSD in the M2_3 slot.**
D
DefenseGuard
10-06-2023, 03:21 AM #2

Are there any disks connected to the SATA ports? According to your manual, SATA2 won’t work during installation of an M.2 SATA SSD in the M2_2 slot. **SATA5 and SATA 6 won’t function when installing an M.2 SSD in the M2_3 slot.**

_
_MrDay_
Member
215
10-06-2023, 03:21 AM
#3
Both storage units are functioning properly. The Samsung drives fit into a m.2 case and are detected by the system. I placed the boot drive in slot 3 but it doesn’t start. I didn’t use slot 1 because it’s labeled for the 11th generation only. I don’t have any traditional SATA drives—just these two M.2 units.
_
_MrDay_
10-06-2023, 03:21 AM #3

Both storage units are functioning properly. The Samsung drives fit into a m.2 case and are detected by the system. I placed the boot drive in slot 3 but it doesn’t start. I didn’t use slot 1 because it’s labeled for the 11th generation only. I don’t have any traditional SATA drives—just these two M.2 units.

R
Rounyx
Posting Freak
838
10-06-2023, 03:21 AM
#4
Please send back or request a replacement for the board. You mentioned two problems suggesting it's defective.
R
Rounyx
10-06-2023, 03:21 AM #4

Please send back or request a replacement for the board. You mentioned two problems suggesting it's defective.

K
kanata0512
Junior Member
2
10-06-2023, 03:21 AM
#5
I acquired the computer without the GPU and AIO from Facebook Marketplace for $140 since it wouldn’t boot. I might place an order for a second M.2 external SSD while searching for a deal on an 11th generation CPU or switching to a newer board and processor. The biggest expense so far has been the MSI AIO, as I funded it using funds from a work health program for the GPU.
K
kanata0512
10-06-2023, 03:21 AM #5

I acquired the computer without the GPU and AIO from Facebook Marketplace for $140 since it wouldn’t boot. I might place an order for a second M.2 external SSD while searching for a deal on an 11th generation CPU or switching to a newer board and processor. The biggest expense so far has been the MSI AIO, as I funded it using funds from a work health program for the GPU.

G
Gr33nFlar3
Member
158
10-06-2023, 03:21 AM
#6
Ah, ok. Well, looks like you got what you paid for. That’s a good computer for the price. You could get a pcie m2 card for a few bucks to hold any additional data drives (those don’t like to boot). For example: https://www.amazon.com/Sabrent-NVMe-PCIe...798&sr=8-3 There are x16 adapters that support 4 drives as well. You have to be a bit more careful there to make sure it fits your application - some of the cards only work in certain type systems.
G
Gr33nFlar3
10-06-2023, 03:21 AM #6

Ah, ok. Well, looks like you got what you paid for. That’s a good computer for the price. You could get a pcie m2 card for a few bucks to hold any additional data drives (those don’t like to boot). For example: https://www.amazon.com/Sabrent-NVMe-PCIe...798&sr=8-3 There are x16 adapters that support 4 drives as well. You have to be a bit more careful there to make sure it fits your application - some of the cards only work in certain type systems.

A
alexjamespeter
Junior Member
37
10-06-2023, 03:21 AM
#7
Thank you for your feedback. I understand your concerns about the AIO installation. I plan to revise it and explore alternative options. Appreciate your input!
A
alexjamespeter
10-06-2023, 03:21 AM #7

Thank you for your feedback. I understand your concerns about the AIO installation. I plan to revise it and explore alternative options. Appreciate your input!

N
NooLele
Posting Freak
847
10-06-2023, 03:21 AM
#8
I confirmed the fix functioned. When the M.2 Genie was powered off, the computer detected the drive. I had to reinstall my BIOS since any attempts to recognize the M.2 slot led to a restart boot error.
N
NooLele
10-06-2023, 03:21 AM #8

I confirmed the fix functioned. When the M.2 Genie was powered off, the computer detected the drive. I had to reinstall my BIOS since any attempts to recognize the M.2 slot led to a restart boot error.