MSI P55-GD55 beep code?
MSI P55-GD55 beep code?
Hi there, I noticed your motherboard is quite old and isn't booting up. You mentioned it might be the GPU, but I'd like to hear more before making changes. Regarding the sound, a BEEP code during startup usually indicates a hardware issue—check the motherboard manual or online forums for similar problems. The sequence of beeps can sometimes point to specific faults, so gathering more details would help.
Checked the MSI website for the manual, but it wasn’t available. Also, looked for information for users who are blind or have no accessible content.
Check if your CPU supports integrated graphics by connecting the monitor to the motherboard port and removing the dedicated GPU. If it starts up, the issue is with the GPU. Try swapping RAM modules—use one stick at a time, preferably in A1 or B1, not A2 or B2. For dual-chip setups, place both sticks in A1 and A2 or B1 and B2 and see if booting works. Ensure RAM clicks securely on both sides when seated, and verify all connections are tight. If problems persist, consider re-seating the CPU or checking for loose cables.
I believe the issue might be with the motherboard or CPU. We swapped out three GPUs but didn’t see any improvement. Fully removed the motherboard from the case and tested outside, still no result. Cleared CMOS and tried again, but nothing changed. Swapped RAM and still nothing. Since we don’t have a motherboard or CPU to work on, we’re planning to replace both. It’s time to move forward with the AM4 board.