F5F Stay Refreshed Hardware Desktop MSI b550 Gaming edge WiFi has issues with BIOS corruption.

MSI b550 Gaming edge WiFi has issues with BIOS corruption.

MSI b550 Gaming edge WiFi has issues with BIOS corruption.

X
xCattyx
Member
196
06-13-2020, 06:01 PM
#1
I was changing from a less stable version (a long story, rare problem with crashes at high load, but those details don’t matter for this issue) to a 5800x. I forgot to update the BIOS. When I realized my mistake, I tried flashing the BIOS but didn’t remember renaming the file. I swapped the CPU back and went through the BIOS to update it, then selected the new file as usual. The percentage kept going up—1%, 2%, etc. I went out for dinner and came back to find it was at 8%, which was fine, so I left it alone. Later I noticed the CPU fan speed wasn’t adjusting. I unplugged it and nothing changed. After some time I turned off the machine using the power button on the front panel. I won’t post anything. The EZ debug LED for the CPU is on. I powered it off a few times, reset everything, checked the CMOS battery, and shorted the CMOS to reset it. Still nothing changed. I switched back to the 5800x again but the CPU EZ debug light stayed on. I tried flashing the BIOS this time, and it worked properly. The LED lights up when you hold the button down, but it doesn’t blink as expected. I repeated all the steps mentioned before and still couldn’t fix it. Is my BIOS damaged? Can I recover or reset it somehow? Should I send it back for repair? Thanks.
X
xCattyx
06-13-2020, 06:01 PM #1

I was changing from a less stable version (a long story, rare problem with crashes at high load, but those details don’t matter for this issue) to a 5800x. I forgot to update the BIOS. When I realized my mistake, I tried flashing the BIOS but didn’t remember renaming the file. I swapped the CPU back and went through the BIOS to update it, then selected the new file as usual. The percentage kept going up—1%, 2%, etc. I went out for dinner and came back to find it was at 8%, which was fine, so I left it alone. Later I noticed the CPU fan speed wasn’t adjusting. I unplugged it and nothing changed. After some time I turned off the machine using the power button on the front panel. I won’t post anything. The EZ debug LED for the CPU is on. I powered it off a few times, reset everything, checked the CMOS battery, and shorted the CMOS to reset it. Still nothing changed. I switched back to the 5800x again but the CPU EZ debug light stayed on. I tried flashing the BIOS this time, and it worked properly. The LED lights up when you hold the button down, but it doesn’t blink as expected. I repeated all the steps mentioned before and still couldn’t fix it. Is my BIOS damaged? Can I recover or reset it somehow? Should I send it back for repair? Thanks.

C
Chester007
Senior Member
528
06-13-2020, 10:19 PM
#2
You messed up your BIOS, and this video might fix your problems
C
Chester007
06-13-2020, 10:19 PM #2

You messed up your BIOS, and this video might fix your problems

F
FireQueen97
Junior Member
33
06-15-2020, 08:38 AM
#3
You did great following the manual steps. The small extra details really helped. I removed the board and switched to a different USB, and it worked perfectly—now my 5800X is fully functional without any CPU issues!
F
FireQueen97
06-15-2020, 08:38 AM #3

You did great following the manual steps. The small extra details really helped. I removed the board and switched to a different USB, and it worked perfectly—now my 5800X is fully functional without any CPU issues!

B
bubbacalmes
Junior Member
10
06-15-2020, 01:17 PM
#4
Answer confirmed.
B
bubbacalmes
06-15-2020, 01:17 PM #4

Answer confirmed.