F5F Stay Refreshed Hardware Desktop MoBo uses 4-pin RGB, while the Aio header only supports 3 pins.

MoBo uses 4-pin RGB, while the Aio header only supports 3 pins.

MoBo uses 4-pin RGB, while the Aio header only supports 3 pins.

I
iNaomiPlays
Senior Member
609
10-23-2022, 02:27 AM
#1
Refer to the AIO manual for details on MSI headers, which feature three pins.
I
iNaomiPlays
10-23-2022, 02:27 AM #1

Refer to the AIO manual for details on MSI headers, which feature three pins.

E
electrodude44
Member
143
10-29-2022, 07:41 PM
#2
3 pin operates at 5V with full color support. 4 pin works at 12V with RGB functionality. Ensure you don't interchange them; connecting 5V to the 12V output can damage the device. Most boards feature both headers, so inspect the board closely—there should be a 5V ARGB header. Refer to your manual for exact header positions in the design. *Note: The manual you're checking may list only two 4-pin 12V RGB headers.*
E
electrodude44
10-29-2022, 07:41 PM #2

3 pin operates at 5V with full color support. 4 pin works at 12V with RGB functionality. Ensure you don't interchange them; connecting 5V to the 12V output can damage the device. Most boards feature both headers, so inspect the board closely—there should be a 5V ARGB header. Refer to your manual for exact header positions in the design. *Note: The manual you're checking may list only two 4-pin 12V RGB headers.*

M
MineiroDeAco
Junior Member
38
11-04-2022, 11:53 PM
#3
Only RGB headers are available, not ARGB... I’d prefer to skip the RGB from the AIO or purchase an ARGB controller such as the Razer Chroma Addressable RGB Controller.
M
MineiroDeAco
11-04-2022, 11:53 PM #3

Only RGB headers are available, not ARGB... I’d prefer to skip the RGB from the AIO or purchase an ARGB controller such as the Razer Chroma Addressable RGB Controller.

B
bunnysuit
Junior Member
7
11-11-2022, 02:56 AM
#4
I haven't located it in the manual. I looked at the top right section and saw a 4-pin version too.
B
bunnysuit
11-11-2022, 02:56 AM #4

I haven't located it in the manual. I looked at the top right section and saw a 4-pin version too.

R
Razerbag
Junior Member
49
11-14-2022, 05:06 PM
#5
Yes, there was a connector inside that also drew power from the SATA port. It was a bit frustrating because I need to open the case to switch the lights.
R
Razerbag
11-14-2022, 05:06 PM #5

Yes, there was a connector inside that also drew power from the SATA port. It was a bit frustrating because I need to open the case to switch the lights.

S
SixJuan
Member
69
11-14-2022, 06:00 PM
#6
Occasionally you can connect the reset switch of the box to the controller, so you don’t need to open it.
S
SixJuan
11-14-2022, 06:00 PM #6

Occasionally you can connect the reset switch of the box to the controller, so you don’t need to open it.