F5F Stay Refreshed Hardware Desktop Minimal cool-down periods Elevated operating conditions

Minimal cool-down periods Elevated operating conditions

Minimal cool-down periods Elevated operating conditions

X
xXRAXERXx
Posting Freak
817
03-13-2020, 04:45 PM
#1
Hey there, I heard you're looking to push your 5800x further and experiment with overclocking. The issue you're facing sounds tricky—your idle temps hover around 27-30°C, but anything more than that triggers a spike to 90°C when you load demanding tasks. That’s a clear sign of thermal stress. You mentioned using the HyperX Master 212X, which is decent, but it seems the cooler might not be delivering enough heat capacity or thermal contact isn’t optimal. It could also be that the CPU isn’t getting tight enough airflow. Maybe check the cooler’s temperature rating, ensure proper installation, and consider a higher-quality thermal paste. If you’re open to suggestions, exploring a cooler with better heatsink design or thermal interface might help stabilize those temps.
X
xXRAXERXx
03-13-2020, 04:45 PM #1

Hey there, I heard you're looking to push your 5800x further and experiment with overclocking. The issue you're facing sounds tricky—your idle temps hover around 27-30°C, but anything more than that triggers a spike to 90°C when you load demanding tasks. That’s a clear sign of thermal stress. You mentioned using the HyperX Master 212X, which is decent, but it seems the cooler might not be delivering enough heat capacity or thermal contact isn’t optimal. It could also be that the CPU isn’t getting tight enough airflow. Maybe check the cooler’s temperature rating, ensure proper installation, and consider a higher-quality thermal paste. If you’re open to suggestions, exploring a cooler with better heatsink design or thermal interface might help stabilize those temps.

I
Ioanes
Junior Member
6
03-15-2020, 08:08 AM
#2
That's sounds pretty reasonable. If it was on tight enough or had other mounting issues, it would have higher idle temperatures. If you want lower temps you'll need a bigger cooler. That's a fine temperature for stock operations.
I
Ioanes
03-15-2020, 08:08 AM #2

That's sounds pretty reasonable. If it was on tight enough or had other mounting issues, it would have higher idle temperatures. If you want lower temps you'll need a bigger cooler. That's a fine temperature for stock operations.

R
Redstoner137
Posting Freak
811
03-15-2020, 08:58 PM
#3
It’s mainly because the cooler isn’t very effective. It works okay enough for the task at hand, but Zen 3 processors tend to generate a lot of heat, so you’ll need something more efficient. I’d recommend a Noctua U12S or U12A model. If those aren’t within your budget, a U12S Redux is a solid alternative—it offers similar cooling performance but with slightly more noise. There are also good choices from other manufacturers like Be Quiet and Artic, though I’m not as comfortable with them. For overclocking, it’s probably best to skip it. Ryzen chips haven’t been optimized for high overclocks lately. Also, undervolting is a better strategy for Zen 3 now that AMD introduced the PBO2 curve optimizer. You might even achieve solid results with your existing cooler if you adjust the voltage properly; many users report stable 5GHz single-core performance at lower voltages.
R
Redstoner137
03-15-2020, 08:58 PM #3

It’s mainly because the cooler isn’t very effective. It works okay enough for the task at hand, but Zen 3 processors tend to generate a lot of heat, so you’ll need something more efficient. I’d recommend a Noctua U12S or U12A model. If those aren’t within your budget, a U12S Redux is a solid alternative—it offers similar cooling performance but with slightly more noise. There are also good choices from other manufacturers like Be Quiet and Artic, though I’m not as comfortable with them. For overclocking, it’s probably best to skip it. Ryzen chips haven’t been optimized for high overclocks lately. Also, undervolting is a better strategy for Zen 3 now that AMD introduced the PBO2 curve optimizer. You might even achieve solid results with your existing cooler if you adjust the voltage properly; many users report stable 5GHz single-core performance at lower voltages.

S
SedentarySauS
Senior Member
411
03-17-2020, 05:10 AM
#4
If possible, I’d suggest going with a Fuma 2 or Mugen 5.
S
SedentarySauS
03-17-2020, 05:10 AM #4

If possible, I’d suggest going with a Fuma 2 or Mugen 5.

X
XxRedxBulletxX
Junior Member
31
03-17-2020, 06:16 AM
#5
Hey everyone, I got a bit surprised by the big changes but I'm planning to get a new cooler soon. I checked out the latest Redux video and the extra noise isn't bothersome for me. For undervaluing, I'll take a closer look and adjust my approach. Thanks again, legends!
X
XxRedxBulletxX
03-17-2020, 06:16 AM #5

Hey everyone, I got a bit surprised by the big changes but I'm planning to get a new cooler soon. I checked out the latest Redux video and the extra noise isn't bothersome for me. For undervaluing, I'll take a closer look and adjust my approach. Thanks again, legends!

B
Blureux
Posting Freak
797
03-17-2020, 12:15 PM
#6
those temps are actually 100% normal so there is nothing to worry about. many people here will tell you that benchmarking puts your compouter thru a stress test and pushes your pc farther than what you would ever have it do day to day even hard core long hours of gaming. if you want lower load temps then a better cooler would be recommended but for idle, its pretty much perfect.
B
Blureux
03-17-2020, 12:15 PM #6

those temps are actually 100% normal so there is nothing to worry about. many people here will tell you that benchmarking puts your compouter thru a stress test and pushes your pc farther than what you would ever have it do day to day even hard core long hours of gaming. if you want lower load temps then a better cooler would be recommended but for idle, its pretty much perfect.

Z
Ziga15
Junior Member
12
03-17-2020, 09:26 PM
#7
It's normal for temperatures to drop with better cooling solutions. I've adjusted the VRM and clock speed to 4.7GHz, yet even with dual 360mm fans, I'm expecting around 85°C. The coolant stays at about 34°C.
Z
Ziga15
03-17-2020, 09:26 PM #7

It's normal for temperatures to drop with better cooling solutions. I've adjusted the VRM and clock speed to 4.7GHz, yet even with dual 360mm fans, I'm expecting around 85°C. The coolant stays at about 34°C.