Memory Advice
Memory Advice
I have an i7 12700K on MSI Z690 with Wi-Fi. My DDR5 setup has two 16GB kits totaling 32GB, but stability drops when using XMP at full speed. I'm unsure whether to stick with 16GBx2@5600 or go for 16GBx4@4800. Online advice is mixed, so I need guidance.
Are you sure you require the full 64GB? If not, opt for two sticks instead. If yes, evaluate whether the performance boost justifies doubling the storage size.
You focus on the storage limits rather than the raw performance boosts. For most users, the main factor isn't noticeable, so I prioritize available space, though casual players often don’t need large amounts like 64GB.
They mentioned how your needs affect the choice. If extra RAM isn’t necessary, running just for it won’t help and may hurt performance. It’s worth noting the speed gap between 5600 and 4800 is minimal; timing matters more than raw speed differences. For gaming and everyday use, 32GB should suffice. The CL36 5600MHz falls on the lower end for timing and speed, so you can likely improve those settings, especially if it’s built with Hynix M-Die technology.
Hello! Your concern is valid. For your setup with a Ryzen 9 5900X on an ASRock X570, the user manual suggests using 4 DDR3 sticks at 2933MHz instead of 3200MHz. Since you're planning to upgrade to 64GB and are mainly doing engineering, CAD, and 3D modeling tasks, some recommendations suggest that having four sticks might offer better performance compared to two. What do you think?
Ddr4 technology is well-established. Ryzen 5xxx models support multiple sticks without problems. Yes, they can manage speeds like 3200 or 3600. It should work if you set the BIOS to those frequencies. How much RAM are you currently using?
This setup involves "Single Rank" memory, and I wasn’t certain if adding four sticks would actually help. I’ve heard some sources suggest that using four single-rank sticks might boost performance compared to two. However, running those four at a slower pace could negate any advantage from the higher rank. I’m still learning enough about it to judge its value clearly.
Many people understand single and dual rank better than me. I can't really focus on what @RONOTHAN## says. Even though I'd like to, I'm used to running 4x16 G with 6000 sticks, 36-36-36-96 configuration. DDR5 is typically single rank, right?