Maximum safe voltage drop below 10750H
Maximum safe voltage drop below 10750H
Hehe, relax. The readings will settle into a range, you know. Start around 50-60-70mV and adjust as needed—maybe begin with -0.050mV, then shift to -0.060 if it holds steady. If you're okay with some fluctuations, try -0.070mV right away. I’ll give it a go and see how it behaves. My setup is a good case in point; it took a couple days for -0.100mV to become unstable, but once it reached -0.095mV it’s been steady ever since.
It seems the system begins thermal throttling when the temperature reaches 85 degrees, not 95. I don’t recall making any adjustments related to that. I only checked if 60mV remained consistent and now this is occurring.
Up to now, -65 mV has remained steady; occasionally it drops under 1 Watt during batterybit operation. This behavior seems unusual since it rarely fell below that level. Previously it stayed near 1.5 watts.