Maximum operating temperature for the CPU is specified in the documentation.
Maximum operating temperature for the CPU is specified in the documentation.
I might attempt it tomorrow. I tend to verify things beforehand. If it works, I’m in favor of trying it. Since I currently have a substantial thermal buffer zone.
I didn't mention 3.2GHz as the maximum speed for partial cores. That's not accurate. You can't set it permanently. The stock configuration is the closest you'll get, but it only works briefly when some cores are idle or under light load, allowing boost above 3.2GHz.
I don’t play with partial cores. I use all of them. It seems I can’t exceed 3.2 GHz when all four are active. I’ve set it to 3.4 GHz manually before.
It changes automatically unless you instruct it otherwise by reducing the multiplier to 32. When CPU usage drops sufficiently, it might increase performance. Your processor isn’t cutting-edge, but it’s capable enough. On every core during heavy workloads, I anticipate occasional dips to 3.3 or 3.4, rather than maintaining a steady high level all day.