F5F Stay Refreshed Hardware Desktop Mainboard emits a sound while using Windows.

Mainboard emits a sound while using Windows.

Mainboard emits a sound while using Windows.

S
Sharkbite1304
Member
196
01-09-2022, 07:33 PM
#1
Hello, I just upgraded my PC with a new motherboard (X670E TUF PLUS), a 7600X CPU and Dominator Platinum 6000 EXPO II RAM. After that, I adjusted the PBO settings and tested for stability. Everything seems to function properly and performance matches the hardware. The only issue is that the memory starts beeping once every ~11 seconds after about 30 seconds in Windows. The AMI BIOS indicates a DRAM refresh failure, but since the PC operates normally, I don't think that's the main problem. I ran Memtest on 2048MB until full with no errors. Someone might have advice on this. Thanks ahead!
S
Sharkbite1304
01-09-2022, 07:33 PM #1

Hello, I just upgraded my PC with a new motherboard (X670E TUF PLUS), a 7600X CPU and Dominator Platinum 6000 EXPO II RAM. After that, I adjusted the PBO settings and tested for stability. Everything seems to function properly and performance matches the hardware. The only issue is that the memory starts beeping once every ~11 seconds after about 30 seconds in Windows. The AMI BIOS indicates a DRAM refresh failure, but since the PC operates normally, I don't think that's the main problem. I ran Memtest on 2048MB until full with no errors. Someone might have advice on this. Thanks ahead!

P
Peedy
Senior Member
641
01-14-2022, 02:16 PM
#2
Sorry, I misread quickly. It seems the issue might be with the CPU rather than the DRAM. Check if your power source is stable.
P
Peedy
01-14-2022, 02:16 PM #2

Sorry, I misread quickly. It seems the issue might be with the CPU rather than the DRAM. Check if your power source is stable.

T
Traftmine
Junior Member
17
01-14-2022, 06:01 PM
#3
Two 16GB SSDs installed in slots 2 and 4
T
Traftmine
01-14-2022, 06:01 PM #3

Two 16GB SSDs installed in slots 2 and 4

D
DuZZfusion
Junior Member
2
01-16-2022, 06:33 PM
#4
The PSU needs sufficient power at 650W. Could the issue stem from only linking one CPU 8-pin on the motherboard? The manual suggests that should be acceptable. How can I verify the PSU correctly (besides checking the connectors)? Connected an 8-pin is B
D
DuZZfusion
01-16-2022, 06:33 PM #4

The PSU needs sufficient power at 650W. Could the issue stem from only linking one CPU 8-pin on the motherboard? The manual suggests that should be acceptable. How can I verify the PSU correctly (besides checking the connectors)? Connected an 8-pin is B

Y
ylyes4
Senior Member
572
01-30-2022, 11:26 AM
#5
Updated 8pin to Slot A, issue remains the same
Y
ylyes4
01-30-2022, 11:26 AM #5

Updated 8pin to Slot A, issue remains the same