Low-speed CAT6 connection at 100Mbps performance
Low-speed CAT6 connection at 100Mbps performance
Hi Everyone, Your setup seems to be functioning but with some speed fluctuations. Since you're already using CAT6 and have Gigabit support, the issue might lie elsewhere—like cabling quality or distance. Consider replacing the LAN cable if possible, or investing in a switch for more stable and higher speeds.
It might be a faulty cable; consider installing a driver update. Verify with Windows Update if your Ethernet adapter has a new release available.
Connect each of the eight wires to the Ethernet jacks on the walls. Locate the other end of the cables—they should connect to a patch panel or a switch somewhere. When using a patch panel, verify that all eight wires are properly linked. If you're using a switch or router, confirm it supports over 100 Mbps. Ensure the pins in the Ethernet jacks (both inside the wall and on your device) remain straight; bent or shorted pins can disrupt performance, often dropping speeds to 100 Mbps. For a stable connection, only four of the eight wires need to be correctly arranged. If not all wires are correctly connected and ordered, you might only achieve 100 Mbps.
Confirm if the Ethernet is using Cat5e or higher and whether it passes through a patch panel or switch.
The cable's tag shows CAT6. It connects straight from the router to my computer, bypassing any switches or panels.
That’s a model router. It seems to support Gigabit LAN ports. The “stock LAN cable” you mentioned is compatible with both devices. The speeds remain consistent whether you’re using the laptop or the desktop with its cable.