Looking for suggestions when replacing frames on a new PC build?
Looking for suggestions when replacing frames on a new PC build?
Hi, I just finished my first build about five days ago. I’ve been testing games to check their performance at 60 fps, and overall it’s been quite good so far. However, there are moments when frames drop noticeably. For instance, GTA V story mode optimized with GeForce Experience runs smoothly at 60 fps, as does the online freemode. But during stunt races online, I often fall to 30-40 fps. I suspect this might be related to the latest update, though I’m not sure why. My rig handles intense explosions without any frame loss, but when I jump into a stunt race with big objects, it drops. Is there a way to fix this? Another case comes up when I enable optimization for Assassin’s Creed 4; the game crashes to 20-30 frames, so I have to manually lower settings. This is frustrating because the visuals drop back to console quality, which defeats the point of using a gaming rig. I can replace parts from the shop if I buy them elsewhere. Should I upgrade the graphics card? Add more RAM? Should I install a faster SSD and keep these demanding games on the SSD instead? My graphics card struggles with the load. I’ve read that both the motherboard case and the GPU box mention options for boosting performance, but I’m not sure what works without going overclocking. Since I’m new to building, any advice would be greatly appreciated. My specs are: i7-4790 (unclear if locked), Z97-E 650W Corsair Critical Ballistix Sport, 16GB RAM, GTX 960, 4GB 850 EVO, 250GB SSD, 1TB WD Blue, Windows 10.
The frame rate drops are typical for older GPUs in GTAV. The assassin's creed problem is uncertain. I don’t have much else to add except that you should have chosen an RX480 with 4GB instead. Newer hardware performs better on newer games and upcoming titles. The 960 will struggle more with DX12 and Vulkan games.
Your 960 was running at 240, you might want to consider swapping it for a better model or upgrading to something like an 1060. Running two GPUs together in a rig allows them to work side by side, sharing processing power and potentially boosting performance, similar to how multiple drives can be used together for faster data access.
Well, when we're discussing prices in USD, Canadian buyers might find the cost higher than what I mentioned. Having those two GPUs all at once wouldn't really help much except for consuming a lot of power. I'd recommend replacing the 960 with a 1060 if available, or wait until you can afford it and then purchase it.