Looking for suggestions to improve your computer?
Looking for suggestions to improve your computer?
Hi everyone, here’s what I’m considering for my 3-year-old PC. I work as a packaging graphics designer, mainly using Illustrator for design work. For 3D projects I rely on Photoshop with layers and effects, plus Lightroom. I occasionally use a 3D modeling program. I also play games like AOE2, Diablo 3, and Watchdog 2. Right now my RAM is just one 8GB module, so I’m thinking about upgrading to 16GB. I found a local store listing a Kingston DDR4-2133 8GB module for around SGD $40 (you can check their price list). I’m curious if there are other upgrade options available. Please review the attached documents. I really appreciate your suggestions ahead of time. Thanks!
You'd need a solid RAM upgrade right now. Usually 8GB isn't enough for tasks like graphic design and 3D work. Aim for at least 16GB, preferably 32GB. Right now it doesn't make sense to spend around 2133MB of RAM unless you're doing heavy rendering. A 2x8GB setup at 3000MHz Corsair Vengeance would cost roughly 100 SGD. If performance issues arise or your PC slows down during work, consider switching to an i7-6700 which you can likely find for about 200 SGD. Personally, avoid buying from Bizgram. Go to Dynacore, build a proper machine, or better yet, shop elsewhere. The staff at Bizgram were very unhelpful and even rude when I visited. Their prices are also high, and they often push unnecessary upgrades. They missed out on a big 9900K sale by telling me not to waste time, which cost me nearly 3k SGD. After that, I bought it from another store and walked away, leaving Bizgram's team frustrated.
Hi there,
This PC was purchased at the Aftershock year-end expo three years ago. I’m not planning to upgrade the motherboard. The manual says it supports up to 2133 RAM, but I’m unsure if that’s enough for your 3000MHz processor. Maybe I should upgrade to an i7 chip or increase the RAM to 16GB or more. Bizgram was just a price reference. I sent them an email, but their response was confusing. I also checked their price list and didn’t find any 2133 RAM options. Is this becoming less common?
Cheers.
Overclocking can seem simple online, but it involves careful steps. For an 8/16 GB RAM setup, focus on stability and compatibility before proceeding. Keep these points in mind: check system requirements, ensure proper cooling, verify BIOS settings, test with minimal load first, and monitor temperatures closely. Always back up data before making changes.
High-speed memory might not always operate at its peak performance. There are methods that frequently help a graphics card accept and function with faster RAM than what it’s officially rated for.
Hello, look at this. It should work well with an i7-8700 non-K or a similar CPU after the changes. I already use an i7-8700 on an ASUS H270 and it’s fine. Also, after the modifications, these boards can handle up to 2666MHz DDR4. Edited November 16, 2019 by 1van
Sure thing! Here’s a revised version of your message:
"Hey there, I noticed you were closing tabs—good luck! You can get a 3000MHz RAM and set it to run at 2133MHz. That frequency is a bit rare these days; aftermarket parts used to be super affordable but often caused issues. Newer systems now use much better components and are more affordable. For the cheapest option locally in Singapore, I’d say 2666MHz is the sweet spot. Most stores still carry them for under $50. If you’re thinking about upgrading your CPU, skip the Skylake i7 line. Go for a Ryzen 2600 or 3600 with a B450 board and a 16GB fast RAM kit—probably around 3200MHz. That should get you running smoothly. You might spend about 500 SGD new, or about $100 less if you choose the 3600. You could even sell your current setup for 200-250 SGD. For better deals, check out places like Dynacore or Fuwell at SLS and ask for prices directly. The staff there are usually happy to help. If you’re not comfortable building it yourself, bring your tower over—they can guide you through the process. If they’re busy, a $40-50 fee is typical for setup and troubleshooting. But honestly, you’ll likely find better prices at Dynacore. I only visit Fuwell when they’re out of stock, as they tend to be pricier."
Just started using the forum. Learned how to use quote. Saw a post about selling 2400 and 2666 MHz RAM. Since I'm new to OC, the seller mentioned I can let the BIOS auto-detect or adjust manually. I'm curious if it's possible to set both settings automatically. Thanks!