F5F Stay Refreshed Hardware Desktop Looking for guidance on the 5700X3D undervolt tutorial?

Looking for guidance on the 5700X3D undervolt tutorial?

Looking for guidance on the 5700X3D undervolt tutorial?

X
xMagicPvP
Member
154
02-27-2022, 01:31 AM
#1
Looking for guidance on the 5700X3D Undervolt guide? Some recommend using the PBO2 App while others suggest checking the BIOS settings. It seems you're facing challenges finding clear, beginner-friendly instructions for both platforms (Gigabyte B550M DS3H Rev1.7). This might be due to the fact that the 5700X3D is a newer chip, which means fewer resources are available.
X
xMagicPvP
02-27-2022, 01:31 AM #1

Looking for guidance on the 5700X3D Undervolt guide? Some recommend using the PBO2 App while others suggest checking the BIOS settings. It seems you're facing challenges finding clear, beginner-friendly instructions for both platforms (Gigabyte B550M DS3H Rev1.7). This might be due to the fact that the 5700X3D is a newer chip, which means fewer resources are available.

P
PootelilooIF19
Junior Member
8
02-27-2022, 02:12 AM
#2
TDC EDC PPT values first, then focus on the curve optimizer using the lowest negative values possible while keeping stability intact.
P
PootelilooIF19
02-27-2022, 02:12 AM #2

TDC EDC PPT values first, then focus on the curve optimizer using the lowest negative values possible while keeping stability intact.

A
ArticWolfGamer
Junior Member
3
02-27-2022, 04:16 AM
#3
Essentially, you can reach the maximum of PPT TDC EDC by turning off restrictions. You can also establish a limit similar to what is shown in the video.
A
ArticWolfGamer
02-27-2022, 04:16 AM #3

Essentially, you can reach the maximum of PPT TDC EDC by turning off restrictions. You can also establish a limit similar to what is shown in the video.

J
JamesHond7
Posting Freak
838
02-27-2022, 04:29 AM
#4
J
JamesHond7
02-27-2022, 04:29 AM #4

F
FurryFox0202
Member
198
03-02-2022, 02:56 PM
#5
Only the limits and curve optimizer need configuration. You may experiment with disabled settings; if issues arise, check the motherboard. On my setup, I surpass the preset limits when it's turned off.
F
FurryFox0202
03-02-2022, 02:56 PM #5

Only the limits and curve optimizer need configuration. You may experiment with disabled settings; if issues arise, check the motherboard. On my setup, I surpass the preset limits when it's turned off.

J
JynxHype
Member
67
03-05-2022, 02:45 PM
#6
I rely on the motherboard to handle limits and set -30 in CO. I've experimented with -20 and -25, but there was no noticeable change in performance, though voltage and temperature showed minor improvements.
J
JynxHype
03-05-2022, 02:45 PM #6

I rely on the motherboard to handle limits and set -30 in CO. I've experimented with -20 and -25, but there was no noticeable change in performance, though voltage and temperature showed minor improvements.