Looking for guidance on boosting RAM speed to 3200MHz on a Ryzen processor?

S

62

12-20-2017, 08:51 AM

#1

Here’s a revised version of your message:

First, let's review the details:
- Ryzen 5 1600
- ASUS B350 PLUS: [link]
- PATRIOT VIPER 4 16GB 2X8 DDR4 3200: PV416G320C6K
- GTX 1070
- NZT THETA 650W
- 500GB HDD, 120GB SSD
I’ve repeatedly attempted to configure my RAM at 3200MHz for the Ryzen CPU, but it consistently fails. My system crashes frequently, so I’ve switched back to auto and kept it that way. I used the DRAM calculator but couldn’t locate my memory type, which led me to incorrect timings on the BIOS and required a CMOS battery reset.

If anyone has suggestions or recommendations for BIOS settings that work well, I’d really appreciate it.

Additionally, since I assembled this build about three months ago, I’ve noticed issues with frame rates—both under load and at low usage—and initially assumed the problem was related to RAM speed. However, I suspect a power supply might be the culprit, as many users have reported similar concerns. I’ve double-checked my cables for stability.

I’m new to PC building, so any guidance would be incredibly helpful.

M

Mr_Gloku
Member

211

12-25-2017, 02:01 PM

#2

2933MHz is a solid option. The first-gen Ryzen struggles with fast memory speeds, while the second-gen can face issues up to 3200MHz and the third-gen offers much better stability.

X

xKoalarz
Member

75

01-02-2018, 04:00 AM

#3

Thanks for the tip! Yes, using a 2933MHz clock with auto timings and a voltage of 1.35V should work well for the first-gen Ryzen.

A

anakindaur
Senior Member

576

01-02-2018, 10:33 AM

#4

Ensure XMP or DOCP remains active to maintain optimal timing and performance.

O

oofgeg
Member

97

01-02-2018, 05:32 PM

#5

In the profile selection menu, if you pick docp or docp standard, your entire system crashes.

S

Smerlyface
Junior Member

6

01-05-2018, 11:54 PM

#6

You can always adjust to a different frequency once docp is applied.

B

BHLxNJx
Posting Freak

881

01-06-2018, 12:45 AM

#7

Sure, I'll wait until tomorrow as it's quite late now and I'm not feeling like fixing things. I'll keep you posted!

U

Username666
Junior Member

3

01-12-2018, 04:27 AM

#8

functioned perfectly, though I was doubtful at first because I’d used this at 2800 MHz and experienced noticeable visual issues and extra stuttering. Why would it work now?