F5F Stay Refreshed Hardware Notebooks Looking for different options to manage my gaming laptop?

Looking for different options to manage my gaming laptop?

Looking for different options to manage my gaming laptop?

D
DraGonX541
Member
189
03-23-2020, 01:15 AM
#1
Hi, I hope you can assist me. My laptop is an ASUS ROG Strix G513RS equipped with a Ryzen 9 6900HX processor, Raedon Graphis (disabled in Device Manager), 16GB RAM, an RTX 3080 Laptop GPU with 8GB VRAM, and a 1TB NVMe SSD. It runs with an external monitor, the ASUS XG27UCG at 165 Hz connected via USB C to the monitor's DP port.

This laptop uses ArmourCrate software to handle various hardware settings such as turbo mode, display modes, and RGB lighting. The issue is that every time I start up, it crashes with a blue screen related to IRQ errors. From other users in the same laptop family, it was suggested that the RGB management software might be the cause. A simple solution was to uninstall the RGB lighting software, which resolved the problem temporarily. However, after updating ArmourCrate to the latest version, removing the RGB software didn’t fix it. In fact, the laptop still crashes even when booting into Safemode.

I’m wondering if there are other management tools available that I can install to control turbo mode and fan speed settings. I currently use MSI Afterburner, but I’ve noticed that after removing ArmourCrate, CPU and GPU temperatures remain slightly high during gaming. Your advice would be greatly appreciated. Thank you very much in advance.
D
DraGonX541
03-23-2020, 01:15 AM #1

Hi, I hope you can assist me. My laptop is an ASUS ROG Strix G513RS equipped with a Ryzen 9 6900HX processor, Raedon Graphis (disabled in Device Manager), 16GB RAM, an RTX 3080 Laptop GPU with 8GB VRAM, and a 1TB NVMe SSD. It runs with an external monitor, the ASUS XG27UCG at 165 Hz connected via USB C to the monitor's DP port.

This laptop uses ArmourCrate software to handle various hardware settings such as turbo mode, display modes, and RGB lighting. The issue is that every time I start up, it crashes with a blue screen related to IRQ errors. From other users in the same laptop family, it was suggested that the RGB management software might be the cause. A simple solution was to uninstall the RGB lighting software, which resolved the problem temporarily. However, after updating ArmourCrate to the latest version, removing the RGB software didn’t fix it. In fact, the laptop still crashes even when booting into Safemode.

I’m wondering if there are other management tools available that I can install to control turbo mode and fan speed settings. I currently use MSI Afterburner, but I’ve noticed that after removing ArmourCrate, CPU and GPU temperatures remain slightly high during gaming. Your advice would be greatly appreciated. Thank you very much in advance.

N
n00b_luv
Junior Member
22
03-23-2020, 06:29 AM
#2
Umm... why not adjust the fan curve in BIOS? Try a more aggressive setting to lower temperatures.
CPU management is also handled via BIOS.
Beyond the Armoury Crate, I'm not aware of anything else.
There are specific programs for controlling fan selection:
Fans - SpeedFAN (hard to master).
RGB - SignalRGB or OpenRGB (may not work with all RGB setups).
GPU - MSI Afterburner
CPU - Ryzen Master, link: https://www.amd.com/en/products/software...aster.html
N
n00b_luv
03-23-2020, 06:29 AM #2

Umm... why not adjust the fan curve in BIOS? Try a more aggressive setting to lower temperatures.
CPU management is also handled via BIOS.
Beyond the Armoury Crate, I'm not aware of anything else.
There are specific programs for controlling fan selection:
Fans - SpeedFAN (hard to master).
RGB - SignalRGB or OpenRGB (may not work with all RGB setups).
GPU - MSI Afterburner
CPU - Ryzen Master, link: https://www.amd.com/en/products/software...aster.html

R
Rinusvandijk
Member
141
03-29-2020, 01:02 PM
#3
Thank you for your reply and for your patience. The software I was seeking is named G-Helper. It is an open source application. However, I don’t have the time or resources to test it, as I’m unable to install it. Sigh... Nonetheless, thank you again for your assistance. I learned more about the issues that armoury Crate introduced. From Reddit, it appears the LED side management is problematic. I have turned off all services connected to this software that I can identify. Whenever I attempt to boot Windows in Safe Mode after logging in, I encounter a blue screen repeatedly. The error messages vary each time—ranging from IRQ issues, memory problems, or keyboard-related faults. My main goal is to remove the latest NVidia driver using DDU, and I’ve always managed to complete this task without trouble. In fact, I haven’t even been able to start it properly; the machine crashes every time I enter Safe Mode. Interestingly, I’m currently using the same laptop as I’m working on this, but I suspect there’s still an underlying issue that’s hard to pinpoint.
R
Rinusvandijk
03-29-2020, 01:02 PM #3

Thank you for your reply and for your patience. The software I was seeking is named G-Helper. It is an open source application. However, I don’t have the time or resources to test it, as I’m unable to install it. Sigh... Nonetheless, thank you again for your assistance. I learned more about the issues that armoury Crate introduced. From Reddit, it appears the LED side management is problematic. I have turned off all services connected to this software that I can identify. Whenever I attempt to boot Windows in Safe Mode after logging in, I encounter a blue screen repeatedly. The error messages vary each time—ranging from IRQ issues, memory problems, or keyboard-related faults. My main goal is to remove the latest NVidia driver using DDU, and I’ve always managed to complete this task without trouble. In fact, I haven’t even been able to start it properly; the machine crashes every time I enter Safe Mode. Interestingly, I’m currently using the same laptop as I’m working on this, but I suspect there’s still an underlying issue that’s hard to pinpoint.

A
ASAAD_3D
Member
199
04-18-2020, 07:01 AM
#4
In this case, either OS (kernel) corruption or hardware failure.
Format of OS drive and new, clean Win installation would be my 1st step. This gets rid of all software issues (including bloatware and malware, except firmware rootkits).
If machine still acts up, even starting fresh (without Armory Crate installed that is), then i'd look towards hardware issues. Could be faulty CPU, since faulty CPU can spew out different kinds of BSoD. RAM would be another target to investigate (e.g memtest86 with 4 full passes).
IF it is CPU issue, then it essentially means new laptop. Since CPU is BGA (ball grid array), it is soldered to MoBo. Or the very least, new CPU-MoBo combo to replace the CPU out.
A
ASAAD_3D
04-18-2020, 07:01 AM #4

In this case, either OS (kernel) corruption or hardware failure.
Format of OS drive and new, clean Win installation would be my 1st step. This gets rid of all software issues (including bloatware and malware, except firmware rootkits).
If machine still acts up, even starting fresh (without Armory Crate installed that is), then i'd look towards hardware issues. Could be faulty CPU, since faulty CPU can spew out different kinds of BSoD. RAM would be another target to investigate (e.g memtest86 with 4 full passes).
IF it is CPU issue, then it essentially means new laptop. Since CPU is BGA (ball grid array), it is soldered to MoBo. Or the very least, new CPU-MoBo combo to replace the CPU out.

R
razorcrafta
Member
164
04-18-2020, 07:43 AM
#5
Just wanted to let you know that GHelp functions properly only after replacing the laptop's motherboard and then performing a fresh Windows installation. It operates very well. I kept the laptop running while playing Ghost of Tsushima at around 85°C maximum. Of course, this happened after thoroughly cleaning the fans and reapplying thermal compound to the cooling system.

For anyone using a gaming laptop, it’s important to assess how dusty your environment is. If you notice dust buildup on your desk (especially a black one) within three days, it’s a sign of neglect. I highly advise cleaning your laptop’s fans monthly. Otherwise, you might end up facing costly repairs, like the $400 I had to spend.
R
razorcrafta
04-18-2020, 07:43 AM #5

Just wanted to let you know that GHelp functions properly only after replacing the laptop's motherboard and then performing a fresh Windows installation. It operates very well. I kept the laptop running while playing Ghost of Tsushima at around 85°C maximum. Of course, this happened after thoroughly cleaning the fans and reapplying thermal compound to the cooling system.

For anyone using a gaming laptop, it’s important to assess how dusty your environment is. If you notice dust buildup on your desk (especially a black one) within three days, it’s a sign of neglect. I highly advise cleaning your laptop’s fans monthly. Otherwise, you might end up facing costly repairs, like the $400 I had to spend.