Looking for assistance with fan curve settings for two CPUs and six cases.
Looking for assistance with fan curve settings for two CPUs and six cases.
I have my R5 1600 at 3.8GHz with 1.3125V, using a Corsair 400C case and an Arctic Freezer 33 cooler. There are two Arctic F12s on the CPU cooler and six more in the case (three front intakes, two top exhausts, one rear exhaust). The chassis fans link to a Deepcool FH-10 hub powered by SATA, connected to the motherboard through a single PWM header, ensuring uniform speed across all fans. The goal is to configure the fan curve properly without being overly noisy. Currently it runs at 30% up to 30°C, 50% up to 50°C, and 70% up to 70°C—this setup seems suboptimal. (Around 35°C at idle, 50°C with Aida64, 65°C with Prime95)
I generally adjust them to a low setting during idle, then raise them closer to maximum when fully loaded, maintaining 100% only for the highest temperatures observed under full load.
I generally adjust them to a low setting during idle, then raise them closer to maximum when fully loaded, maintaining 100% for the highest temperatures observed under full load.