Looking for assistance with boosting RAM performance?

F5F Stay Refreshed Power Users Overclocking Looking for assistance with boosting RAM performance?

Looking for assistance with boosting RAM performance?

Looking for assistance with boosting RAM performance?

R

Romppanen_
Member

202

09-15-2018, 10:24 PM

#1

Hello, your Asrock z390 phantom gaming 4 sli motherboard has an xpg spectrix d60g 2x8gb RAM. When you change the XMP profile after rebooting, the frequency shows as 1066 MHz instead of the expected value. You might be misconfiguring the settings in the BIOS manually. Check the manual for proper configuration steps and ensure everything is set correctly. Your CPU model is i5-9600kf.

R

Romppanen_

09-15-2018, 10:24 PM #1

Hello, your Asrock z390 phantom gaming 4 sli motherboard has an xpg spectrix d60g 2x8gb RAM. When you change the XMP profile after rebooting, the frequency shows as 1066 MHz instead of the expected value. You might be misconfiguring the settings in the BIOS manually. Check the manual for proper configuration steps and ensure everything is set correctly. Your CPU model is i5-9600kf.

T

TheMineSeven
Member

74

09-16-2018, 03:04 AM

#2

Upgrade the BIOS on your motherboard to version 4.30, reset it using the jumper, and attempt again with the XMP profile 1 (press F10 to save and exit). Check if the dims are present in slots A2 and B2.

T

TheMineSeven

09-16-2018, 03:04 AM #2

Upgrade the BIOS on your motherboard to version 4.30, reset it using the jumper, and attempt again with the XMP profile 1 (press F10 to save and exit). Check if the dims are present in slots A2 and B2.

D

Dyriver
Member

145

10-04-2018, 08:09 PM

#3

Upgrade the BIOS on your motherboard to version 4.30, reset it using the jumper, and attempt again with the XMP profile 1 (press F10 to save and exit). Check if the dims are present in slots A2 and B2.

D

Dyriver

10-04-2018, 08:09 PM #3

Upgrade the BIOS on your motherboard to version 4.30, reset it using the jumper, and attempt again with the XMP profile 1 (press F10 to save and exit). Check if the dims are present in slots A2 and B2.

N

Nivek360
Member

68

10-08-2018, 11:34 PM

#4

Bios is now running at 100x speed with a time of 4.30
😀
The rams have been placed in the A1 and B1 positions.

N

Nivek360

10-08-2018, 11:34 PM #4

Bios is now running at 100x speed with a time of 4.30
😀
The rams have been placed in the A1 and B1 positions.

Z

ZeusTrucker
Member

221

10-09-2018, 08:04 AM

#5

as helpstar mentioned updating to a2 /b2

Z

ZeusTrucker

10-09-2018, 08:04 AM #5

as helpstar mentioned updating to a2 /b2