F5F Stay Refreshed Hardware Desktop Long-term voltage measurements at 8700kV

Long-term voltage measurements at 8700kV

Long-term voltage measurements at 8700kV

X
xIWeedPvP_
Junior Member
14
06-05-2017, 01:04 AM
#1
Hello, regarding CPU overclocking, should I focus on Vcore underload or the BIOS settings for continuous use? Even with LLC1, I experience a voltage drop. On 1.37 it falls to 1.344. It seems possible to push it up to 1.40 or even 1.41, as it approaches the limit for long-term use. After that drop, voltage will stay below 1.40. Many people discuss 1.40 as the maximum for sustained operation, but I’m unsure if it relates to BIOS or Vcore underload. This has been my main concern. I’ve had this CPU for two years and recently started overclocking. My Asrock Z370 Extreme4 isn’t maintaining a flat voltage on LLC1, while BIOS shows a stable reading. Could it be a board issue or something specific to my setup? Thanks for your advice.
X
xIWeedPvP_
06-05-2017, 01:04 AM #1

Hello, regarding CPU overclocking, should I focus on Vcore underload or the BIOS settings for continuous use? Even with LLC1, I experience a voltage drop. On 1.37 it falls to 1.344. It seems possible to push it up to 1.40 or even 1.41, as it approaches the limit for long-term use. After that drop, voltage will stay below 1.40. Many people discuss 1.40 as the maximum for sustained operation, but I’m unsure if it relates to BIOS or Vcore underload. This has been my main concern. I’ve had this CPU for two years and recently started overclocking. My Asrock Z370 Extreme4 isn’t maintaining a flat voltage on LLC1, while BIOS shows a stable reading. Could it be a board issue or something specific to my setup? Thanks for your advice.

Q
qwertyinvader
Junior Member
14
06-06-2017, 11:29 PM
#2
5ghz around 1.37v seems correct. My setting is 1.360v. Adjust the CPU LLC manually to avoid v-droop. Try level 3 instead.
Q
qwertyinvader
06-06-2017, 11:29 PM #2

5ghz around 1.37v seems correct. My setting is 1.360v. Adjust the CPU LLC manually to avoid v-droop. Try level 3 instead.

B
BountyHunter22
Junior Member
33
06-07-2017, 08:49 AM
#3
I own the Extreme4 with an 8600k and it's mostly flat. It's been running at 1.36v for about three years, though it doesn't always run at full capacity. After converting to LLC, the performance has changed.
B
BountyHunter22
06-07-2017, 08:49 AM #3

I own the Extreme4 with an 8600k and it's mostly flat. It's been running at 1.36v for about three years, though it doesn't always run at full capacity. After converting to LLC, the performance has changed.

S
Shadow_foxx
Junior Member
6
06-07-2017, 10:02 AM
#4
At 1.37 the output reaches 4.9. Level 1 is the best LLC configuration with the lowest voltage droop, covering up to 5 levels. At level 1 there is still droop, which prevents a flat voltage output for certain reasons similar to others.
S
Shadow_foxx
06-07-2017, 10:02 AM #4

At 1.37 the output reaches 4.9. Level 1 is the best LLC configuration with the lowest voltage droop, covering up to 5 levels. At level 1 there is still droop, which prevents a flat voltage output for certain reasons similar to others.

D
dj_scully
Junior Member
42
06-07-2017, 10:13 AM
#5
According to your statement, level 1 is the most basic setting and a score of 5 should be considered too high.
D
dj_scully
06-07-2017, 10:13 AM #5

According to your statement, level 1 is the most basic setting and a score of 5 should be considered too high.

S
shark1045
Member
199
06-07-2017, 10:37 AM
#6
Off the board. Level 1 is flat, but I'm still having trouble understanding it for some reason.
S
shark1045
06-07-2017, 10:37 AM #6

Off the board. Level 1 is flat, but I'm still having trouble understanding it for some reason.

S
scorps5121
Member
151
06-08-2017, 07:52 AM
#7
The information is a bit unclear. Could you clarify if you're asking about the bios being current or something else?
S
scorps5121
06-08-2017, 07:52 AM #7

The information is a bit unclear. Could you clarify if you're asking about the bios being current or something else?

_
_KotoVasa_
Member
197
06-11-2017, 03:10 AM
#8
It's clear that the issue was resolved in a previous release, yet I'm using the latest version.
_
_KotoVasa_
06-11-2017, 03:10 AM #8

It's clear that the issue was resolved in a previous release, yet I'm using the latest version.