Liqtech tr4 360 temps paracen hoge

F5F Stay Refreshed Power Users Overclocking Liqtech tr4 360 temps paracen hoge

Liqtech tr4 360 temps paracen hoge

Liqtech tr4 360 temps paracen hoge

M

Maliwan99
Senior Member

346

04-11-2024, 04:37 PM

#1

Modest OC (3.8 @ 1.2375) is commenting on Taichi's post. The current temperature is 113c, which he finds surprising.

M

Maliwan99

04-11-2024, 04:37 PM #1

Modest OC (3.8 @ 1.2375) is commenting on Taichi's post. The current temperature is 113c, which he finds surprising.

P

peyesta
Member

212

04-12-2024, 06:07 AM

#2

Yes, I would reapply thermal compound and ensure correct mounting. Prior to this, it's a good idea to verify power connections and adjust motor speeds specifically for the pump. Run the pump at full speed and observe the results.

P

peyesta

04-12-2024, 06:07 AM #2

Yes, I would reapply thermal compound and ensure correct mounting. Prior to this, it's a good idea to verify power connections and adjust motor speeds specifically for the pump. Run the pump at full speed and observe the results.

A

AM72
Member

76

04-13-2024, 12:42 AM

#3

Yes.

A

AM72

04-13-2024, 12:42 AM #3

Yes.

I

IoandGamer
Member

55

04-13-2024, 07:29 AM

#4

Right. The 360 has been running for roughly a year now... I attempted overclocking initially but ended up focusing on other tasks... What’s going on? Should I reapply thermal paste? Is my 360 in trouble?

I

IoandGamer

04-13-2024, 07:29 AM #4

Right. The 360 has been running for roughly a year now... I attempted overclocking initially but ended up focusing on other tasks... What’s going on? Should I reapply thermal paste? Is my 360 in trouble?

D

digayo
Junior Member

44

04-24-2024, 03:40 PM

#5

Yes, I would reapply thermal compound and ensure correct mounting. Prior to this, it's a good idea to verify power connections and adjust motor speeds specifically for the pump. Run the pump at full speed and observe the results.

D

digayo

04-24-2024, 03:40 PM #5

Yes, I would reapply thermal compound and ensure correct mounting. Prior to this, it's a good idea to verify power connections and adjust motor speeds specifically for the pump. Run the pump at full speed and observe the results.

X

xTripleMinerx
Posting Freak

846

04-24-2024, 03:59 PM

#6

Also verify for any plastic foil on the contact plate.

X

xTripleMinerx

04-24-2024, 03:59 PM #6

Also verify for any plastic foil on the contact plate.

I

ItsMeCamryn
Junior Member

39

04-24-2024, 10:56 PM

#7

Ok will do thanks guys. Also one more thing. Idle temps are around 40c it's just the load temps that seem high. Does this point to anything?

I

ItsMeCamryn

04-24-2024, 10:56 PM #7

Ok will do thanks guys. Also one more thing. Idle temps are around 40c it's just the load temps that seem high. Does this point to anything?

M

m0m0lepr0
Junior Member

10

04-26-2024, 10:57 AM

#8

You can also adjust the settings to run the pump at maximum capacity.

M

m0m0lepr0

04-26-2024, 10:57 AM #8

You can also adjust the settings to run the pump at maximum capacity.