Linux Mint version 20.1 AMD ATI Mobility Radeon HD 5650
Linux Mint version 20.1 AMD ATI Mobility Radeon HD 5650
ItsTheSoul
04-28-2016, 11:11 AM #1Hello team, could you confirm if there’s already a similar discussion? I’m facing an issue with my Dell laptop running Linux Mint 20.1. The AMD ATI Mobility Radeon HD 5650 appears to be causing driver problems. When I first installed Linux from boot, I encountered a black screen with a flickering cursor. After adjusting the boot grub command line with 'nomodeset', it worked for installation. Then I tried installing AMD Catalyst via sudo apt-get commands, but nothing seems to function. Please advise—maybe there’s a simpler solution! I’d appreciate any extra details about your system.
S2] at 0x60,0x64 irq 1,12 [ 1.211356] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.211363] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.211920] mousedev: PS/2 mouse device common for all mice [ 1.212807] rtc_cmos 00:01: RTC can wake from S4 [ 1.213230] rtc_cmos 00:01: registered as rtc0 [ 1.213258] rtc_cmos 00:01: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 1.213268] i2c /dev entries driver [ 1.213328] device-mapper: uevent: version 1.0.3 [ 1.213526] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: [email protected] [ 1.213581] platform eisa.0: Probing EISA bus 0 [ 1.213585] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 1.213589] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 1.213592] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 1.213595] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 1.213598] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 1.213601] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 1.213604] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 1.213606] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 1.213609] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 1.213612] platform eisa.0: EISA: Detected 0 cards [ 1.213618] intel_pstate: CPU model not supported [ 1.214228] ledtrig-cpu: registered to indicate activity on CPUs [ 1.214317] drop_monitor: Initializing network drop monitor service [ 1.214586] NET: Registered protocol family 10 [ 1.225976] Segment Routing with IPv6 [ 1.226034] NET: Registered protocol family 17 [ 1.226226] Key type dns_resolver registered [ 1.228159] RAS: Correctable Errors collector initialized. [ 1.228236] microcode: sig=0x106e5, pf=0x10, revision=0xa [ 1.228442] microcode: Microcode Update Driver: v2.2. [ 1.228450] IPI shorthand broadcast: enabled [ 1.228469] sched_clock: Marking stable (1228104590, 321339)->(1242733992, -14308063) [ 1.228726] registered taskstats version 1 [ 1.228745] Loading compiled-in X.509 certificates [ 1.230683] Loaded X.509 cert 'Build time autogenerated kernel key: a27f806352cb82663e9dcb51d1e4a82214d6dc37' [ 1.230747] zswap: loaded using pool lzo/zbud [ 1.231036] Key type ._fscrypt registered [ 1.231037] Key type .fscrypt registered [ 1.241698] Key type big_key registered [ 1.245328] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.247659] Key type encrypted registered [ 1.247667] AppArmor: AppArmor sha1 policy hashing enabled [ 1.247679] ima: No TPM chip found, activating TPM-bypass! [ 1.247690] ima: Allocated hash algorithm: sha1 [ 1.247704] ima: No architecture policies found [ 1.247728] evm: Initialising EVM extended attributes: [ 1.247730] evm: security.selinux [ 1.247731] evm: security.SMACK64 [ 1.247732] evm: security.SMACK64EXEC [ 1.247734] evm: security.SMACK64TRANSMUTE [ 1.247735] evm: security.SMACK64MMAP [ 1.247736] evm: security.apparmor [ 1.247737] evm: security.ima [ 1.247739] evm: security.capability [ 1.247740] evm: HMAC attrs: 0x1 [ 1.248307] PM: Magic number: 5:780:493 [ 1.248506] rtc_cmos 00:01: setting system clock to 2021-01-13T18:27:52 UTC (1610562472) [ 1.255272] Freeing unused decrypted memory: 2040K [ 1.255949] Freeing unused kernel image memory: 2724K [ 1.280425] Write protecting the kernel read-only data: 22528k [ 1.281145] Freeing unused kernel image memory: 2008K [ 1.281492] Freeing unused kernel image memory: 1184K [ 1.294655] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.294791] x86/mm: Checking user space page tables [ 1.307687] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.307689] Run /init as init process [ 1.324949] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.325824] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.325832] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.403908] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no) [ 1.426600] acpi device:06: registered as cooling_device8 [ 1.426739] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:04/LNXVIDEO:01/input/input6 [ 1.433908] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found [ 1.440445] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000549 (\_SB.PCI0.SBRG.GPI1) (20190816/utaddress-204) [ 1.440453] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.440455] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000549 (\_SB.PCI0.SBRG.GPI1) (20190816/utaddress-204) [ 1.440462] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.440464] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000549 (\_SB.PCI0.SBRG.GPI1) (20190816/utaddress-204) [ 1.440471] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.440472] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 1.441071] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.444798] ahci 0000:00:1f.2: version 3.0 [ 1.453221] libphy: r8169: probed [ 1.453448] r8169 0000:13:00.0 eth0: RTL8102e/RTL8103e, f0:4d:a2:a2:0c:f3, XID 24e, IRQ 18 [ 1.456177] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x13 impl SATA mode [ 1.456181] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst [ 1.480132] r8169 0000:13:00.0 enp19s0: renamed from eth0 [ 1.480271] scsi host0: ahci [ 1.480499] scsi host1: ahci [ 1.480817] scsi host2: ahci [ 1.480992] scsi host3: ahci [ 1.481127] scsi host4: ahci [ 1.481258] scsi host5: ahci [ 1.481339] ata1: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06100 irq 34 [ 1.481345] ata2: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06180 irq 34 [ 1.481346] ata3: DUMMY [ 1.481347] ata4: DUMMY [ 1.481353] ata5: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06300 irq 34 [ 1.481354] ata6: DUMMY [ 1.513806] [drm:radeon_init [radeon]] *ERROR* No UMS support in radeon module! [ 1.513820] fbcon: Taking over console [ 1.513993] Console: switching to colour frame buffer device 128x48 [ 1.514129] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.630955] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.671142] usb 2-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00 [ 1.671147] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.671768] hub 2-1:1.0: USB hub found [ 1.671904] hub 2-1:1.0: 8 ports detected [ 1.791113] usb 1-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00 [ 1.791118] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.791878] hub 1-1:1.0: USB hub found [ 1.792103] hub 1-1:1.0: 6 ports detected [ 1.794832] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.794865] ata5: SATA link down (SStatus 0 SControl 300) [ 1.798627] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.811736] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-L633C, DW50, max UDMA/100 [ 1.811743] ata2.00: applying bridge limits [ 1.833458] ata2.00: configured for UDMA/100 [ 1.867349] ata1.00: ATA-9: ST1000LM014-1EJ164, SM28, max UDMA/133 [ 1.867353] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.874238] tsc: Refined TSC clocksource calibration: 1729.007 MHz [ 1.874251] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x18ec311c265, max_idle_ns: 440795203965 ns [ 1.874367] clocksource: Switched to clocksource tsc [ 1.911739] ata1.00: configured for UDMA/133 [ 1.912320] scsi 0:0:0:0: Direct-Access ATA ST1000LM014-1EJ1 SM28 PQ: 0 ANSI: 5 [ 1.912943] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.912946] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.912958] sd 0:0:0:0: [sda] Write Protect is off [ 1.912960] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.912971] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.912979] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.920330] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L633C DW50 PQ: 0 ANSI: 5 [ 1.931913] sda: sda1 sda2 < sda5 > [ 1.933189] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.958257] usb 2-1.1: new low-speed USB device number 3 using ehci-pci [ 1.995743] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.995747] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.014886] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.015173] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.076785] usb 2-1.1: New USB device found, idVendor=1a2c, idProduct=4094, bcdDevice= 1.10 [ 2.076793] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.076798] usb 2-1.1: Product: USB Keyboard [ 2.076803] usb 2-1.1: Manufacturer: SEMICO [ 2.078131] usb 1-1.6: new high-speed USB device number 3 using ehci-pci [ 2.082115] hidraw: raw HID events driver © Jiri Kosina [ 2.093373] usbcore: registered new interface driver usbhid [ 2.093374] usbhid: USB HID core driver [ 2.097075] input: SEMICO USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:1A2C:4094.0001/input/input8 [ 2.154890] hid-generic 0003:1A2C:4094.0001: input,hidraw0: USB HID v1.10 Keyboard [SEMICO USB Keyboard] on usb-0000:00:1d.0-1.1/input0 [ 2.155095] input: SEMICO USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:1A2C:4094.0002/input/input9 [ 2.158219] usb 2-1.2: new low-speed USB device number 4 using ehci-pci [ 2.214355] input: SEMICO USB Keyboard System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:1A2C:4094.0002/input/input10 [ 2.214456] hid-generic 0003:1A2C:4094.0002: input,hidraw1: USB HID v1.10 Device [SEMICO USB Keyboard] on usb-0000:00:1d.0-1.1/input1 [ 2.227527] usb 1-1.6: New USB device found, idVendor=0c45, idProduct=641d, bcdDevice= 1.26 [ 2.227533] usb 1-1.6: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 2.227536] usb 1-1.6: Product: Laptop_Integrated_Webcam_1.3M [ 2.227539] usb 1-1.6: Manufacturer: CN0FJT7K724870A3W6B7A00 [ 2.275245] usb 2-1.2: New USB device found, idVendor=04d9, idProduct=0499, bcdDevice= 9.10 [ 2.275251] usb 2-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.283574] input: HID 04d9:0499 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:04D9:0499.0003/input/input11 [ 2.284430] hid-generic 0003:04D9:0499.0003: input,hidraw2: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:1d.0-1.2/input0 [ 2.366435] usb 2-1.6: new full-speed USB device number 5 using ehci-pci [ 2.477941] usb 2-1.6: New USB device found, idVendor=0a5c, idProduct=4500, bcdDevice= 1.00 [ 2.477946] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.477950] usb 2-1.6: Product: BCM2046B1 [ 2.477953] usb 2-1.6: Manufacturer: Broadcom [ 2.478690] hub 2-1.6:1.0: USB hub found [ 2.478922] hub 2-1.6:1.0: 3 ports detected [ 2.483091] psmouse serio1: synaptics: queried max coordinates: x [..5650], y [..4710] [ 2.599116] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000/0x0, board id: 0, fw id: 581785 [ 2.672310] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 2.774242] usb 2-1.6.1: new full-speed USB device number 6 using ehci-pci [ 2.886749] usb 2-1.6.1: New USB device found, idVendor=413c, idProduct=8161, bcdDevice= 1.00 [ 2.886755] usb 2-1.6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.889270] input: HID 413c:8161 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.1/2-1.6.1:1.0/0003:413C:8161.0004/input/input12 [ 2.946754] hid-generic 0003:413C:8161.0004: input,hidraw3: USB HID v1.11 Keyboard [HID 413c:8161] on usb-0000:00:1d.0-1.6.1/input0 [ 3.026245] usb 2-1.6.2: new full-speed USB device number 7 using ehci-pci [ 3.139003] usb 2-1.6.2: New USB device found, idVendor=413c, idProduct=8162, bcdDevice= 1.00 [ 3.139009] usb 2-1.6.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.142787] input: HID 413c:8162 Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.2/2-1.6.2:1.0/0003:413C:8162.0005/input/input13 [ 3.143009] hid-generic 0003:413C:8162.0005: input,hidraw4: USB HID v1.11 Mouse [HID 413c:8162] on usb-0000:00:1d.0-1.6.2/input0 [ 3.994255] raid6: sse2x4 gen() 9134 MB/s [ 4.042263] raid6: sse2x4 xor() 6728 MB/s [ 4.090277] raid6: sse2x2 gen() 8171 MB/s [ 4.138275] raid6: sse2x2 xor() 6154 MB/s [ 4.186265] raid6: sse2x1 gen() 6740 MB/s [ 4.234266] raid6: sse2x1 xor() 5181 MB/s [ 4.234269] raid6: using algorithm sse2x4 gen() 9134 MB/s [ 4.234271] raid6: .... xor() 6728 MB/s, rmw enabled [ 4.234278] raid6: using ssse3x2 recovery algorithm [ 4.237922] xor: measuring software checksum speed [ 4.274262] prefetch64-sse: 12996.000 MB/sec [ 4.314255] generic_sse: 11119.000 MB/sec [ 4.314262] xor: using function: prefetch64-sse (12996.000 MB/sec) [ 4.339445] Btrfs loaded, crc32c=crc32c-intel [ 4.537475] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 4.895818] systemd[1]: Inserted module 'autofs4' [ 4.924731] systemd[1]: systemd 245.4-4ubuntu3.3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 4.946522] systemd[1]: Detected architecture x86-64. [ 4.962869] systemd[1]: Set hostname to <ryan-Inspiron-N5010>. [ 5.216377] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. [ 5.276224] systemd[1]: /lib/systemd/system/fancontrol.service:11: PIDFile= references a path below legacy directory /var/run/, updating /var/run/fancontrol.pid → /run/fancontrol.pid; please update the unit file accordingly. [ 5.318942] systemd[1]: Created slice system-modprobe.slice. [ 5.319319] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 5.319669] systemd[1]: Created slice User and Session Slice. [ 5.319738] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.319945] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 5.319993] systemd[1]: Reached target User and Group Name Lookups. [ 5.320011] systemd[1]: Reached target Remote File Systems. [ 5.320023] systemd[1]: Reached target Slices. [ 5.320103] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 5.320208] systemd[1]: Listening on LVM2 poll daemon socket. [ 5.320305] systemd[1]: Listening on Syslog Socket. [ 5.322699] systemd[1]: Listening on Process Core Dump Socket. [ 5.322799] systemd[1]: Listening on fsck to fsckd communication Socket. [ 5.322859] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 5.323067] systemd[1]: Listening on Journal Audit Socket. [ 5.323171] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.323290] systemd[1]: Listening on Journal Socket. [ 5.323408] systemd[1]: Listening on udev Control Socket. [ 5.323487] systemd[1]: Listening on udev Kernel Socket. [ 5.324583] systemd[1]: Mounting Huge Pages File System... [ 5.325797] systemd[1]: Mounting POSIX Message Queue File System... [ 5.327348] systemd[1]: Mounting Kernel Debug File System... [ 5.328924] systemd[1]: Mounting Kernel Trace File System... [ 5.331430] systemd[1]: Starting Journal Service... [ 5.332951] systemd[1]: Starting Availability of block devices... [ 5.334877] systemd[1]: Starting Set the console keyboard layout... [ 5.336673] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 5.338365] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 5.338434] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 5.340433] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 5.340501] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 5.344858] systemd[1]: Starting Load Kernel Modules... [ 5.346757] systemd[1]: Starting Remount Root and Kernel File Systems... [ 5.348448] systemd[1]: Starting udev Coldplug all Devices... [ 5.350655] systemd[1]: Starting Uncomplicated firewall... [ 5.354860] systemd[1]: Mounted Huge Pages File System. [ 5.355225] systemd[1]: Mounted POSIX Message Queue File System. [ 5.355567] systemd[1]: Mounted Kernel Debug File System. [ 5.355880] systemd[1]: Mounted Kernel Trace File System. [ 5.357361] systemd[1]: Finished Availability of block devices. [ 5.358555] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 5.370573] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 5.372825] systemd[1]: Finished Remount Root and Kernel File Systems. [ 5.374754] systemd[1]: Activating swap /swapfile... [ 5.375635] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 5.375714] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 5.377671] systemd[1]: Starting Load/Save Random Seed... [ 5.379916] systemd[1]: Starting Create System Users... [ 5.386737] lp: driver loaded but no devices found [ 5.388622] bpfilter: Loaded bpfilter_umh pid 388 [ 5.389049] Started bpfilter [ 5.394584] ppdev: user-space parallel port driver [ 5.409671] systemd[1]: Finished Load/Save Random Seed. [ 5.411215] systemd[1]: Finished Load Kernel Modules. [ 5.413111] systemd[1]: Mounting FUSE Control File System... [ 5.415170] systemd[1]: Mounting Kernel Configuration File System... [ 5.417304] systemd[1]: Starting Apply Kernel Variables... [ 5.420682] systemd[1]: Mounted FUSE Control File System. [ 5.420972] systemd[1]: Mounted Kernel Configuration File System. [ 5.423952] systemd[1]: Finished Create System Users. [ 5.426049] systemd[1]: Starting Create Static Device Nodes in /dev... [ 5.447710] systemd[1]: Finished Apply Kernel Variables. [ 5.453953] systemd[1]: Finished Create Static Device Nodes in /dev. [ 5.456078] systemd[1]: Starting udev Kernel Device Manager... [ 5.501905] systemd[1]: Finished Set the console keyboard layout. [ 5.544876] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling. [ 5.545168] systemd[1]: Reached target Local File Systems (Pre). [ 5.556385] systemd[1]: Finished udev Coldplug all Devices. [ 5.559132] systemd[1]: Starting Helper to synchronize boot up for ifupdown... [ 5.566209] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS [ 5.566855] systemd[1]: Finished Helper to synchronize boot up for ifupdown. [ 5.567177] systemd[1]: Activated swap /swapfile. [ 5.567324] systemd[1]: Reached target Swap. [ 5.569674] systemd[1]: Started Journal Service. [ 5.580004] systemd-journald[360]: Received client request to flush runtime journal. [ 6.032718] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.033482] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.079709] EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c50 [ 6.135066] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3) [ 6.144192] dell-smbios A80593CE-A997-11DA-B012-B622A1EF5492: WMI SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS [ 6.150603] random: crng init done [ 6.150605] random: 7 urandom warning(s) missed due to ratelimiting [ 6.159073] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input15 [ 6.186131] mc: Linux media interface: v0.10 [ 6.217172] videodev: Linux video capture interface: v2.00 [ 6.224820] [drm:radeon_init [radeon]] *ERROR* No UMS support in radeon module! [ 6.343467] wl: loading out-of-tree module taints kernel. [ 6.343475] wl: module license 'MIXED/Proprietary' taints kernel. [ 6.343476] Disabling lock debugging due to kernel taint [ 6.520540] wl: module verification failed: signature and/or required key missing - tainting kernel [ 6.524373] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (0c45:641d) [ 6.530150] usb 2-1.6.3: new full-speed USB device number 8 using ehci-pci [ 6.563743] input: Laptop_Integrated_Webcam_1.3M: as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input16 [ 6.563900] usbcore: registered new interface driver uvcvideo [ 6.563902] USB Video Class driver (1.1.1) [ 6.638060] wlan0: Broadcom BCM4727 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334) [ 6.646554] wl 0000:12:00.0 wlp18s0: renamed from wlan0 [ 6.648642] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 6.650424] usb 2-1.6.3: New USB device found, idVendor=413c, idProduct=8160, bcdDevice= 1.73 [ 6.650428] usb 2-1.6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.650430] usb 2-1.6.3: Product: Dell Wireless 365 Bluetooth Module [ 6.650433] usb 2-1.6.3: Manufacturer: Dell Computer Corp [ 6.672875] snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client [ 6.688000] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input17 [ 6.693370] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type
peaker [ 6.693373] snd_hda_codec_idt hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 6.693375] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) [ 6.693376] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0 [ 6.693377] snd_hda_codec_idt hdaudioC0D0: inputs: [ 6.693380] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0xc [ 6.693381] snd_hda_codec_idt hdaudioC0D0: Mic=0xa [ 6.729158] Bluetooth: Core ver 2.22 [ 6.729179] NET: Registered protocol family 31 [ 6.729180] Bluetooth: HCI device and connection manager initialized [ 6.729186] Bluetooth: HCI socket layer initialized [ 6.729188] Bluetooth: L2CAP socket layer initialized [ 6.729192] Bluetooth: SCO socket layer initialized [ 6.744497] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 [ 6.744633] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 [ 6.745891] usbcore: registered new interface driver btusb [ 6.923071] audit: type=1400 audit(1610562478.169:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=728 comm="apparmor_parser" [ 6.923584] audit: type=1400 audit(1610562478.169:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=729 comm="apparmor_parser" [ 6.924074] audit: type=1400 audit(1610562478.169:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=723 comm="apparmor_parser" [ 6.924079] audit: type=1400 audit(1610562478.169:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=723 comm="apparmor_parser" [ 6.925819] audit: type=1400 audit(1610562478.169:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=721 comm="apparmor_parser" [ 6.929687] audit: type=1400 audit(1610562478.173:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=730 comm="apparmor_parser" [ 6.931682] audit: type=1400 audit(1610562478.177:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=732 comm="apparmor_parser" [ 6.931688] audit: type=1400 audit(1610562478.177:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=732 comm="apparmor_parser" [ 6.931693] audit: type=1400 audit(1610562478.177:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=732 comm="apparmor_parser" [ 6.932091] audit: type=1400 audit(1610562478.177:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=724 comm="apparmor_parser" [ 8.441933] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 8.441935] Bluetooth: BNEP filters: protocol multicast [ 8.441940] Bluetooth: BNEP socket layer initialized [ 8.651398] NET: Registered protocol family 38 [ 8.972895] RTL8201CP Ethernet r8169-1300:00: attached PHY driver [RTL8201CP Ethernet] (mii_bus:phy_addr=r8169-1300:00, irq=IGNORE) [ 9.083325] r8169 0000:13:00.0 enp19s0: Link is Down [ 11.392167] Bluetooth: RFCOMM TTY layer initialized [ 11.392175] Bluetooth: RFCOMM socket layer initialized [ 11.392182] Bluetooth: RFCOMM ver 1.11 [ 16.602418] CE: hpet increased min_delta_ns to 20115 nsec [ 161.941159] usb 2-1.6: USB disconnect, device number 5 [ 161.941165] usb 2-1.6.1: USB disconnect, device number 6 [ 162.016462] usb 2-1.6.2: USB disconnect, device number 7 [ 162.016713] usb 2-1.6.3: USB disconnect, device number 8 [ 164.467997] usb 2-1.6: new full-speed USB device number 9 using ehci-pci [ 164.578705] usb 2-1.6: New USB device found, idVendor=0a5c, idProduct=4500, bcdDevice= 1.00 [ 164.578711] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 164.578715] usb 2-1.6: Product: BCM2046B1 [ 164.578718] usb 2-1.6: Manufacturer: Broadcom [ 164.579256] hub 2-1.6:1.0: USB hub found [ 164.579479] hub 2-1.6:1.0: 3 ports detected [ 164.873847] usb 2-1.6.1: new full-speed USB device number 10 using ehci-pci [ 164.996204] usb 2-1.6.1: New USB device found, idVendor=413c, idProduct=8161, bcdDevice= 1.00 [ 164.996210] usb 2-1.6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 164.998914] input: HID 413c:8161 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.1/2-1.6.1:1.0/0003:413C:8161.0006/input/input20 [ 165.056594] hid-generic 0003:413C:8161.0006: input,hidraw3: USB HID v1.11 Keyboard [HID 413c:8161] on usb-0000:00:1d.0-1.6.1/input0 [ 165.135891] usb 2-1.6.2: new full-speed USB device number 11 using ehci-pci [ 165.248476] usb 2-1.6.2: New USB device found, idVendor=413c, idProduct=8162, bcdDevice= 1.00 [ 165.248482] usb 2-1.6.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 165.252545] input: HID 413c:8162 Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.2/2-1.6.2:1.0/0003:413C:8162.0007/input/input21 [ 165.253168] hid-generic 0003:413C:8162.0007: input,hidraw4: USB HID v1.11 Mouse [HID 413c:8162] on usb-0000:00:1d.0-1.6.2/input0 [ 165.627987] usb 2-1.6.3: new full-speed USB device number 12 using ehci-pci [ 165.741448] usb 2-1.6.3: New USB device found, idVendor=413c, idProduct=8160, bcdDevice= 1.73 [ 165.741454] usb 2-1.6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 165.741457] usb 2-1.6.3: Product: Dell Wireless 365 Bluetooth Module [ 165.741460] usb 2-1.6.3: Manufacturer: Dell Computer Corp [ 173.461087] usb 2-1.6: USB disconnect, device number 9 [ 173.461093] usb 2-1.6.1: USB disconnect, device number 10 [ 173.552924] usb 2-1.6.2: USB disconnect, device number 11 [ 173.553229] usb 2-1.6.3: USB disconnect, device number 12 [ 174.708157] usb 2-1.6: new full-speed USB device number 13 using ehci-pci [ 174.819082] usb 2-1.6: New USB device found, idVendor=0a5c, idProduct=4500, bcdDevice= 1.00 [ 174.819088] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 174.819091] usb 2-1.6: Product: BCM2046B1 [ 174.819095] usb 2-1.6: Manufacturer: Broadcom [ 174.819612] hub 2-1.6:1.0: USB hub found [ 174.819758] hub 2-1.6:1.0: 3 ports detected [ 175.108168] usb 2-1.6.1: new full-speed USB device number 14 using ehci-pci [ 175.220162] usb 2-1.6.1: New USB device found, idVendor=413c, idProduct=8161, bcdDevice= 1.00 [ 175.220167] usb 2-1.6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 175.222734] input: HID 413c:8161 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.1/2-1.6.1:1.0/0003:413C:8161.0008/input/input23 [ 175.280637] hid-generic 0003:413C:8161.0008: input,hidraw3: USB HID v1.11 Keyboard [HID 413c:8161] on usb-0000:00:1d.0-1.6.1/input0 [ 175.360170] usb 2-1.6.2: new full-speed USB device number 15 using ehci-pci [ 175.472791] usb 2-1.6.2: New USB device found, idVendor=413c, idProduct=8162, bcdDevice= 1.00 [ 175.472796] usb 2-1.6.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 175.476578] input: HID 413c:8162 Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.2/2-1.6.2:1.0/0003:413C:8162.0009/input/input24 [ 175.476922] hid-generic 0003:413C:8162.0009: input,hidraw4: USB HID v1.11 Mouse [HID 413c:8162] on usb-0000:00:1d.0-1.6.2/input0 [ 175.868128] usb 2-1.6.3: new full-speed USB device number 16 using ehci-pci [ 175.981646] usb 2-1.6.3: New USB device found, idVendor=413c, idProduct=8160, bcdDevice= 1.73 [ 175.981652] usb 2-1.6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 175.981655] usb 2-1.6.3: Product: Dell Wireless 365 Bluetooth Module [ 175.981658] usb 2-1.6.3: Manufacturer: Dell Computer Corp [ 240.528879] CE: hpet6 increased min_delta_ns to 20115 nsec [ 247.740829] CE: hpet3 increased min_delta_ns to 20115 nsec [ 247.940828] CE: hpet7 increased min_delta_ns to 20115 nsec [ 250.424920] CE: hpet4 increased min_delta_ns to 20115 nsec [ 735.890826] usb 2-1.1: USB disconnect, device number 3 [ 743.314796] usb 2-1.2: USB disconnect, device number 4 [ 785.579065] r8169 0000:13:00.0 enp19s0: Link is Up - 100Mbps/Full - flow control off [ 785.579087] IPv6: ADDRCONF(NETDEV_CHANGE): enp19s0: link becomes ready [ 786.144584] r8169 0000:13:00.0 enp19s0: Link is Down [ 787.780999] r8169 0000:13:00.0 enp19s0: Link is Up - 100Mbps/Full - flow control off [ 789.772042] r8169 0000:13:00.0 enp19s0: Link is Down [ 791.419362] r8169 0000:13:00.0 enp19s0: Link is Up - 100Mbps/Full - flow control off [ 844.947129] usb 2-1.1: new low-speed USB device number 17 using ehci-pci [ 845.063516] usb 2-1.1: New USB device found, idVendor=04d9, idProduct=0499, bcdDevice= 9.10 [ 845.063522] usb 2-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 845.071803] input: HID 04d9:0499 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:04D9:0499.000A/input/input26 [ 845.072153] hid-generic 0003:04D9:0499.000A: input,hidraw0: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:1d.0-1.1/input0 [ 921.564887] CE: hpet5 increased min_delta_ns to 20115 nsec [ 984.383021] CE: hpet7 increased min_delta_ns to 30172 nsec [ 1454.369650] CE: hpet increased min_delta_ns to 30172 nsec [ 1878.255008] perf: interrupt took too long (2512 > 2500), lowering kernel.perf_event_max_sample_rate to 79500 [ 2206.853210] perf: interrupt took too long (3164 > 3140), lowering kernel.perf_event_max_sample_rate to 63000 [ 2756.600880] perf: interrupt took too long (4121 > 3955), lowering kernel.perf_event_max_sample_rate to 48500
Charliemc909
04-30-2016, 08:40 PM #4[ 0.000000] microcode: microcode updated early to revision 0xa, date = 2018-05-08 [ 0.000000] Linux version 5.4.0-60-generic (buildd@lgw01-amd64-001) (gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04)) #67-Ubuntu SMP Tue Jan 5 18:31:36 UTC 2021 (Ubuntu 5.4.0-60.67-generic 5.4.78) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-60-generic root=UUID=7ae50bdb-9924-40ff-8a64-81ebc7386a0e ro radeon.modeset=0 quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bbd9cfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bbd9d000-0x00000000bbdeafff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bbdeb000-0x00000000bbdf5fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bbdf6000-0x00000000bbdf8fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bbdf9000-0x00000000bbe1cfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bbe1d000-0x00000000bbe24fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bbe25000-0x00000000bbe27fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bbe28000-0x00000000bbe2cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bbe2d000-0x00000000bbe4cfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bbe4d000-0x00000000bbe8ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bbe90000-0x00000000bbffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bc000000-0x00000000bf7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Dell Inc. Inspiron N5010/, BIOS A15 07/19/2011 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1729.160 MHz processor [ 0.004012] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.004015] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.004027] last_pfn = 0x240000 max_arch_pfn = 0x400000000 [ 0.004032] MTRR default type: uncachable [ 0.004033] MTRR fixed ranges enabled: [ 0.004035] 00000-9FFFF write-back [ 0.004037] A0000-BFFFF uncachable [ 0.004038] C0000-CFFFF write-protect [ 0.004040] D0000-E7FFF uncachable [ 0.004042] E8000-FFFFF write-protect [ 0.004043] MTRR variable ranges enabled: [ 0.004045] 0 base 000000000 mask E00000000 write-back [ 0.004047] 1 base 200000000 mask FC0000000 write-back [ 0.004049] 2 base 0C0000000 mask FC0000000 uncachable [ 0.004050] 3 disabled [ 0.004051] 4 disabled [ 0.004052] 5 disabled [ 0.004052] 6 disabled [ 0.004053] 7 disabled [ 0.004992] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.005175] total RAM covered: 8192M [ 0.006484] Found optimal setting for mtrr clean up [ 0.006485] gran_size: 64K chunk_size: 64K num_reg: 4 lose cover RAM: 0G [ 0.007279] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved [ 0.007285] last_pfn = 0xbc000 max_arch_pfn = 0x400000000 [ 0.022500] found SMP MP-table at [mem 0x000fcdd0-0x000fcddf] [ 0.038997] check: Scanning 1 areas for low memory corruption [ 0.039737] RAMDISK: [mem 0x2dc2f000-0x32e0efff] [ 0.039754] ACPI: Early table checksum verification disabled [ 0.039759] ACPI: RSDP 0x00000000000F0410 000024 (v03 DELL ) [ 0.039764] ACPI: XSDT 0x00000000BBDEB088 00005C (v01 DELL WN09 01072009 AMI 00010013) [ 0.039774] ACPI: FACP 0x00000000BBDF4A48 0000F4 (v04 DELL WN09 01072009 AMI 00010013) [ 0.039783] ACPI: DSDT 0x00000000BBDEB170 0098D2 (v02 DELL WN09 00005010 INTL 20051117) [ 0.039790] ACPI: FACS 0x00000000BBE28F40 000040 [ 0.039794] ACPI: FACS 0x00000000BBE28F80 000040 [ 0.039799] ACPI: APIC 0x00000000BBDF4B40 000092 (v01 DELL WN09 01072009 AMI 00010013) [ 0.039805] ACPI: SSDT 0x00000000BBDF4BD8 00026E (v01 AMICPU PROC 00000001 MSFT 03000001) [ 0.039811] ACPI: MCFG 0x00000000BBDF4E48 00003C (v01 DELL WN09 01072009 MSFT 00000097) [ 0.039817] ACPI: SLIC 0x00000000BBDF4E88 000176 (v01 DELL WN09 01072009 AMI 00010013) [ 0.039823] ACPI: HPET 0x00000000BBDF5000 000038 (v01 DELL WN09 01072009 AMI. 00000003) [ 0.039828] ACPI: OSFR 0x00000000BBDF5038 00008C (v01 DELL M08 07DB0713 ASL 00000061) [ 0.039845] ACPI: Local APIC address 0xfee00000 [ 0.040036] No NUMA configuration found [ 0.040037] Faking a node at [mem 0x0000000000000000-0x000000023fffffff] [ 0.040056] NODE_DATA(0) allocated [mem 0x23ffd4000-0x23fffefff] [ 0.040564] Zone ranges: [ 0.040565] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.040567] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.040568] Normal [mem 0x0000000100000000-0x000000023fffffff] [ 0.040570] Device empty [ 0.040571] Movable zone start for each node [ 0.040576] Early memory node ranges [ 0.040578] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.040579] node 0: [mem 0x0000000000100000-0x00000000bbd9cfff] [ 0.040581] node 0: [mem 0x00000000bbe90000-0x00000000bbffffff] [ 0.040582] node 0: [mem 0x0000000100000000-0x000000023fffffff] [ 0.040834] Zeroed struct page in unavailable ranges: 16727 pages [ 0.040836] Initmem setup node 0 [mem 0x0000000000001000-0x000000023fffffff] [ 0.040839] On node 0 totalpages: 2080425 [ 0.040840] DMA zone: 64 pages used for memmap [ 0.040841] DMA zone: 21 pages reserved [ 0.040843] DMA zone: 3996 pages, LIFO batch:0 [ 0.040954] DMA32 zone: 11965 pages used for memmap [ 0.040955] DMA32 zone: 765709 pages, LIFO batch:63 [ 0.064267] Normal zone: 20480 pages used for memmap [ 0.064270] Normal zone: 1310720 pages, LIFO batch:63 [ 0.098104] ACPI: PM-Timer IO Port: 0x408 [ 0.098108] ACPI: Local APIC address 0xfee00000 [ 0.098121] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.098138] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.098142] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.098144] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.098146] ACPI: IRQ0 used by override. [ 0.098148] ACPI: IRQ9 used by override. [ 0.098152] Using ACPI (MADT) for SMP configuration information [ 0.098154] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.098162] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.098199] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.098202] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.098203] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.098204] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.098205] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.098208] PM: Registered nosave memory: [mem 0xbbd9d000-0xbbdeafff] [ 0.098209] PM: Registered nosave memory: [mem 0xbbdeb000-0xbbdf5fff] [ 0.098210] PM: Registered nosave memory: [mem 0xbbdf6000-0xbbdf8fff] [ 0.098211] PM: Registered nosave memory: [mem 0xbbdf9000-0xbbe1cfff] [ 0.098212] PM: Registered nosave memory: [mem 0xbbe1d000-0xbbe24fff] [ 0.098213] PM: Registered nosave memory: [mem 0xbbe25000-0xbbe27fff] [ 0.098214] PM: Registered nosave memory: [mem 0xbbe28000-0xbbe2cfff] [ 0.098215] PM: Registered nosave memory: [mem 0xbbe2d000-0xbbe4cfff] [ 0.098216] PM: Registered nosave memory: [mem 0xbbe4d000-0xbbe8ffff] [ 0.098219] PM: Registered nosave memory: [mem 0xbc000000-0xbf7fffff] [ 0.098220] PM: Registered nosave memory: [mem 0xbf800000-0xdfffffff] [ 0.098221] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.098222] PM: Registered nosave memory: [mem 0xf0000000-0xfed1bfff] [ 0.098223] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.098224] PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff] [ 0.098225] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.098228] [mem 0xbf800000-0xdfffffff] available for PCI devices [ 0.098230] Booting paravirtualized kernel on bare hardware [ 0.098233] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.098244] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.098667] percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u262144 [ 0.098680] pcpu-alloc: s188416 r8192 d28672 u262144 alloc=1*2097152 [ 0.098681] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.098736] Built 1 zonelists, mobility grouping on. Total pages: 2047895 [ 0.098737] Policy zone: Normal [ 0.098739] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-60-generic root=UUID=7ae50bdb-9924-40ff-8a64-81ebc7386a0e ro radeon.modeset=0 quiet splash [ 0.099832] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.100279] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.100418] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.107423] Calgary: detecting Calgary via BIOS EBDA area [ 0.107425] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.143185] Memory: 7993684K/8321700K available (14339K kernel code, 2399K rwdata, 4960K rodata, 2724K init, 4980K bss, 328016K reserved, 0K cma-reserved) [ 0.143195] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0 [ 0.143488] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.143510] Kernel/User page tables isolation: enabled [ 0.143534] ftrace: allocating 44555 entries in 175 pages [ 0.175042] rcu: Hierarchical RCU implementation. [ 0.175045] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.175046] Tasks RCU enabled. [ 0.175047] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.175048] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.181387] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.181870] Console: colour dummy device 80x25 [ 0.181876] printk: console [tty0] enabled [ 0.181904] ACPI: Core revision 20190816 [ 0.182058] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.182095] APIC: Switch to symmetric I/O mode setup [ 0.182740] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.202095] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x18ecc1a3e88, max_idle_ns: 440795260990 ns [ 0.202101] Calibrating delay loop (skipped), value calculated using timer frequency.. 3458.32 BogoMIPS (lpj=6916640) [ 0.202104] pid_max: default: 32768 minimum: 301 [ 0.202163] LSM: Security Framework initializing [ 0.202182] Yama: becoming mindful. [ 0.202250] AppArmor: AppArmor initialized [ 0.202331] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.202354] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.202380] *** VALIDATE tmpfs *** [ 0.202642] *** VALIDATE proc *** [ 0.202735] *** VALIDATE cgroup1 *** [ 0.202738] *** VALIDATE cgroup2 *** [ 0.202807] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.202823] process: using mwait in idle threads [ 0.202827] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 [ 0.202829] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.202833] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.202835] Spectre V2 : Mitigation: Full generic retpoline [ 0.202836] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.202836] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.202839] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.202840] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.202841] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.202846] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.203059] Freeing SMP alternatives memory: 40K [ 0.316726] smpboot: CPU0: Intel® Core™ i7 CPU Q 740 @ 1.73GHz (family: 0x6, model: 0x1e, stepping: 0x5) [ 0.316914] Performance Events: PEBS fmt1+, Nehalem events, 16-deep LBR, Intel PMU driver. [ 0.316922] core: CPU erratum AAJ80 worked around [ 0.316923] core: CPUID marked event: 'bus cycles' unavailable [ 0.316924] ... version: 3 [ 0.316925] ... bit width: 48 [ 0.316926] ... generic registers: 4 [ 0.316927] ... value mask: 0000ffffffffffff [ 0.316928] ... max period: 000000007fffffff [ 0.316929] ... fixed-purpose events: 3 [ 0.316930] ... event mask: 000000070000000f [ 0.316993] rcu: Hierarchical SRCU implementation. [ 0.318097] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.318097] smp: Bringing up secondary CPUs ... [ 0.318097] x86: Booting SMP configuration: [ 0.318097] .... node #0, CPUs: #1 #2 #3 #4 [ 0.330212] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/a...n/mds.html for more details. [ 0.330324] #5 #6 #7 [ 0.338135] smp: Brought up 1 node, 8 CPUs [ 0.338137] smpboot: Max logical packages: 1 [ 0.338140] smpboot: Total of 8 processors activated (27666.56 BogoMIPS) [ 0.342577] devtmpfs: initialized [ 0.342577] x86/mm: Memory block size: 128MB [ 0.346157] PM: Registering ACPI NVS region [mem 0xbbd9d000-0xbbdeafff] (319488 bytes) [ 0.346165] PM: Registering ACPI NVS region [mem 0xbbdf6000-0xbbdf8fff] (12288 bytes) [ 0.346166] PM: Registering ACPI NVS region [mem 0xbbe1d000-0xbbe24fff] (32768 bytes) [ 0.346169] PM: Registering ACPI NVS region [mem 0xbbe28000-0xbbe2cfff] (20480 bytes) [ 0.346171] PM: Registering ACPI NVS region [mem 0xbbe4d000-0xbbe8ffff] (274432 bytes) [ 0.346245] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.346245] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.346254] pinctrl core: initialized pinctrl subsystem [ 0.346406] PM: RTC time: 18:27:51, date: 2021-01-13 [ 0.346590] NET: Registered protocol family 16 [ 0.346728] audit: initializing netlink subsys (disabled) [ 0.346738] audit: type=2000 audit(1610562470.164:1): state=initialized audit_enabled=0 res=1 [ 0.346738] EISA bus registered [ 0.346738] cpuidle: using governor ladder [ 0.346738] cpuidle: using governor menu [ 0.346738] ACPI: bus type PCI registered [ 0.346738] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.346738] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.346738] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.346738] PCI: Using configuration type 1 for base access [ 0.350588] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.350588] ACPI: Added _OSI(Module Device) [ 0.350588] ACPI: Added _OSI(Processor Device) [ 0.350588] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.350588] ACPI: Added _OSI(Processor Aggregator Device) [ 0.350588] ACPI: Added _OSI(Linux-Dell-Video) [ 0.350588] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.350588] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.365307] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.369744] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.375505] ACPI: Dynamic OEM Table Load: [ 0.375513] ACPI: SSDT 0xFFFF943536155800 000724 (v01 AMI IST 00000001 MSFT 03000001) [ 0.382074] ACPI: Interpreter enabled [ 0.382110] ACPI: (supports S0 S3 S4 S5) [ 0.382111] ACPI: Using IOAPIC for interrupt routing [ 0.382169] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.382532] ACPI: Enabled 9 GPEs in block 00 to 3F [ 0.413677] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.413685] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.418117] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.418494] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug AER PCIeCapability] [ 0.419030] PCI host bridge to bus 0000:00 [ 0.419033] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.419035] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.419037] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.419039] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window] [ 0.419041] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.419056] pci 0000:00:00.0: [8086:d132] type 00 class 0x060000 [ 0.419243] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400 [ 0.419279] pci 0000:00:03.0: enabling Extended Tags [ 0.419327] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.419499] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000 [ 0.419673] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000 [ 0.419847] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000 [ 0.420015] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000 [ 0.420177] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000 [ 0.420322] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000 [ 0.420503] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000 [ 0.420537] pci 0000:00:16.0: reg 0x10: [mem 0xfbf09000-0xfbf0900f 64bit] [ 0.420636] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.420790] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320 [ 0.420823] pci 0000:00:1a.0: reg 0x10: [mem 0xfbf08000-0xfbf083ff] [ 0.420928] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.421104] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300 [ 0.421136] pci 0000:00:1b.0: reg 0x10: [mem 0xfbf00000-0xfbf03fff 64bit] [ 0.421239] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.421384] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400 [ 0.421558] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.421674] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400 [ 0.421853] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.421962] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400 [ 0.422156] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.422274] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400 [ 0.422454] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.422574] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320 [ 0.422607] pci 0000:00:1d.0: reg 0x10: [mem 0xfbf07000-0xfbf073ff] [ 0.422712] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.422883] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.423116] pci 0000:00:1f.0: [8086:3b0b] type 00 class 0x060100 [ 0.423399] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601 [ 0.423429] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.423441] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.423454] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.423466] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.423479] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.423492] pci 0000:00:1f.2: reg 0x24: [mem 0xfbf06000-0xfbf067ff] [ 0.423553] pci 0000:00:1f.2: PME# supported from D3hot [ 0.423716] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500 [ 0.423746] pci 0000:00:1f.3: reg 0x10: [mem 0xfbf05000-0xfbf050ff 64bit] [ 0.423772] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.424015] pci 0000:02:00.0: [1002:68c1] type 00 class 0x030000 [ 0.424038] pci 0000:02:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.424049] pci 0000:02:00.0: reg 0x18: [mem 0xfbe20000-0xfbe3ffff 64bit] [ 0.424057] pci 0000:02:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 0.424071] pci 0000:02:00.0: reg 0x30: [mem 0xfbe00000-0xfbe1ffff pref] [ 0.424078] pci 0000:02:00.0: enabling Extended Tags [ 0.424122] pci 0000:02:00.0: supports D1 D2 [ 0.424220] pci 0000:02:00.1: [1002:aa60] type 00 class 0x040300 [ 0.424242] pci 0000:02:00.1: reg 0x10: [mem 0xfbe40000-0xfbe43fff 64bit] [ 0.424279] pci 0000:02:00.1: enabling Extended Tags [ 0.424322] pci 0000:02:00.1: supports D1 D2 [ 0.424411] pci 0000:00:03.0: PCI bridge to [bus 02] [ 0.424414] pci 0000:00:03.0: bridge window [io 0xe000-0xefff] [ 0.424418] pci 0000:00:03.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.424422] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.424541] pci 0000:00:1c.0: PCI bridge to [bus 11] [ 0.424706] pci 0000:12:00.0: [14e4:4727] type 00 class 0x028000 [ 0.424754] pci 0000:12:00.0: reg 0x10: [mem 0xfbd00000-0xfbd03fff 64bit] [ 0.424822] pci 0000:12:00.0: enabling Extended Tags [ 0.424942] pci 0000:12:00.0: supports D1 D2 [ 0.424944] pci 0000:12:00.0: PME# supported from D0 D3hot D3cold [ 0.425122] pci 0000:00:1c.1: PCI bridge to [bus 12] [ 0.425133] pci 0000:00:1c.1: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.425227] pci 0000:13:00.0: [10ec:8136] type 00 class 0x020000 [ 0.425267] pci 0000:13:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.425301] pci 0000:13:00.0: reg 0x18: [mem 0xd0c10000-0xd0c10fff 64bit pref] [ 0.425324] pci 0000:13:00.0: reg 0x20: [mem 0xd0c00000-0xd0c0ffff 64bit pref] [ 0.425341] pci 0000:13:00.0: reg 0x30: [mem 0xfb300000-0xfb31ffff pref] [ 0.425961] pci 0000:13:00.0: supports D1 D2 [ 0.425963] pci 0000:13:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.426419] pci 0000:00:1c.2: PCI bridge to [bus 13] [ 0.426427] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 0.426435] pci 0000:00:1c.2: bridge window [mem 0xfb300000-0xfbcfffff] [ 0.426445] pci 0000:00:1c.2: bridge window [mem 0xd0c00000-0xd15fffff 64bit pref] [ 0.426579] pci 0000:00:1c.4: PCI bridge to [bus 15] [ 0.426587] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 0.426595] pci 0000:00:1c.4: bridge window [mem 0xfa900000-0xfb2fffff] [ 0.426605] pci 0000:00:1c.4: bridge window [mem 0xd0100000-0xd0afffff 64bit pref] [ 0.426638] pci_bus 0000:20: extended config space not accessible [ 0.426704] pci 0000:00:1e.0: PCI bridge to [bus 20] (subtractive decode) [ 0.426719] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.426721] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.426723] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.426724] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode) [ 0.427488] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.427627] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.427768] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.427910] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15) [ 0.428049] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 0.428191] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 0.428332] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.428468] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.428858] iommu: Default domain type: Translated [ 0.428858] SCSI subsystem initialized [ 0.428858] libata version 3.00 loaded. [ 0.428858] pci 0000:02:00.0: vgaarb: setting as boot VGA device [ 0.428858] pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.428858] pci 0000:02:00.0: vgaarb: bridge control possible [ 0.428858] vgaarb: loaded [ 0.428858] ACPI: bus type USB registered [ 0.428858] usbcore: registered new interface driver usbfs [ 0.428858] usbcore: registered new interface driver hub [ 0.428858] usbcore: registered new device driver usb [ 0.428858] pps_core: LinuxPPS API ver. 1 registered [ 0.428858] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> [ 0.428858] PTP clock support registered [ 0.428858] EDAC MC: Ver: 3.0.0 [ 0.428858] PCI: Using ACPI for IRQ routing [ 0.435312] PCI: Discovered peer bus ff [ 0.435314] PCI: root bus ff: using default resources [ 0.435315] PCI: Probing PCI hardware (bus ff) [ 0.435346] PCI host bridge to bus 0000:ff [ 0.435349] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff] [ 0.435351] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff] [ 0.435353] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff] [ 0.435356] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff]) [ 0.435363] pci 0000:ff:00.0: [8086:2c52] type 00 class 0x060000 [ 0.435429] pci 0000:ff:00.1: [8086:2c81] type 00 class 0x060000 [ 0.435491] pci 0000:ff:02.0: [8086:2c90] type 00 class 0x060000 [ 0.435548] pci 0000:ff:02.1: [8086:2c91] type 00 class 0x060000 [ 0.435607] pci 0000:ff:03.0: [8086:2c98] type 00 class 0x060000 [ 0.435664] pci 0000:ff:03.1: [8086:2c99] type 00 class 0x060000 [ 0.435721] pci 0000:ff:03.4: [8086:2c9c] type 00 class 0x060000 [ 0.435784] pci 0000:ff:04.0: [8086:2ca0] type 00 class 0x060000 [ 0.435840] pci 0000:ff:04.1: [8086:2ca1] type 00 class 0x060000 [ 0.435898] pci 0000:ff:04.2: [8086:2ca2] type 00 class 0x060000 [ 0.435954] pci 0000:ff:04.3: [8086:2ca3] type 00 class 0x060000 [ 0.436012] pci 0000:ff:05.0: [8086:2ca8] type 00 class 0x060000 [ 0.436068] pci 0000:ff:05.1: [8086:2ca9] type 00 class 0x060000 [ 0.436127] pci 0000:ff:05.2: [8086:2caa] type 00 class 0x060000 [ 0.436185] pci 0000:ff:05.3: [8086:2cab] type 00 class 0x060000 [ 0.436266] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff [ 0.436268] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff]) [ 0.436275] PCI: pci_cache_line_size set to 64 bytes [ 0.436400] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff] [ 0.436401] e820: reserve RAM buffer [mem 0xbbd9d000-0xbbffffff] [ 0.436544] NetLabel: Initializing [ 0.436546] NetLabel: domain hash size = 128 [ 0.436546] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.436578] NetLabel: unlabeled traffic allowed by default [ 0.438174] hpet: 8 channels of 5 reserved for per-cpu timers [ 0.438183] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 24, 25, 26, 27, 28 [ 0.438188] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.440202] clocksource: Switched to clocksource tsc-early [ 0.459313] *** VALIDATE bpf *** [ 0.459433] VFS: Disk quotas dquot_6.6.0 [ 0.459460] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.459493] *** VALIDATE ramfs *** [ 0.459500] *** VALIDATE hugetlbfs *** [ 0.459625] AppArmor: AppArmor Filesystem Enabled [ 0.459664] pnp: PnP ACPI init [ 0.459921] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.459924] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.459926] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.459929] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.459931] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved [ 0.459939] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.460020] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.460126] system 00:02: [io 0x04d0-0x04d1] has been reserved [ 0.460129] system 00:02: [mem 0xfe800000-0xfe8001ff] has been reserved [ 0.460135] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.460192] pnp 00:03: Plug and Play ACPI device, IDs DLL0447 SYN0600 SYN0002 PNP0f13 (active) [ 0.460246] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.460646] system 00:05: [io 0x0400-0x047f] has been reserved [ 0.460649] system 00:05: [io 0x1180-0x119f] has been reserved [ 0.460651] system 00:05: [io 0x0500-0x057f] has been reserved [ 0.460654] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.460656] system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved [ 0.460659] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved [ 0.460661] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.460667] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.461230] pnp: PnP ACPI: found 6 devices [ 0.463360] thermal_sys: Registered thermal governor 'fair_share' [ 0.463362] thermal_sys: Registered thermal governor 'bang_bang' [ 0.463363] thermal_sys: Registered thermal governor 'step_wise' [ 0.463364] thermal_sys: Registered thermal governor 'user_space' [ 0.463365] thermal_sys: Registered thermal governor 'power_allocator' [ 0.467895] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.467959] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 11] add_size 1000 [ 0.467964] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 11] add_size 200000 add_align 100000 [ 0.467967] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 11] add_size 200000 add_align 100000 [ 0.467970] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 12] add_size 1000 [ 0.467973] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 12] add_size 200000 add_align 100000 [ 0.467984] pci 0000:00:1c.0: BAR 14: assigned [mem 0xd1600000-0xd17fffff] [ 0.467991] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd1800000-0xd19fffff 64bit pref] [ 0.467996] pci 0000:00:1c.1: BAR 15: assigned [mem 0xd1a00000-0xd1bfffff 64bit pref] [ 0.467999] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.468002] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff] [ 0.468006] pci 0000:00:03.0: PCI bridge to [bus 02] [ 0.468009] pci 0000:00:03.0: bridge window [io 0xe000-0xefff] [ 0.468014] pci 0000:00:03.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.468017] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.468022] pci 0000:00:1c.0: PCI bridge to [bus 11] [ 0.468029] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.468038] pci 0000:00:1c.0: bridge window [mem 0xd1600000-0xd17fffff] [ 0.468046] pci 0000:00:1c.0: bridge window [mem 0xd1800000-0xd19fffff 64bit pref] [ 0.468056] pci 0000:00:1c.1: PCI bridge to [bus 12] [ 0.468063] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.468072] pci 0000:00:1c.1: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.468080] pci 0000:00:1c.1: bridge window [mem 0xd1a00000-0xd1bfffff 64bit pref] [ 0.468090] pci 0000:00:1c.2: PCI bridge to [bus 13] [ 0.468097] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 0.468106] pci 0000:00:1c.2: bridge window [mem 0xfb300000-0xfbcfffff] [ 0.468114] pci 0000:00:1c.2: bridge window [mem 0xd0c00000-0xd15fffff 64bit pref] [ 0.468124] pci 0000:00:1c.4: PCI bridge to [bus 15] [ 0.468131] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 0.468140] pci 0000:00:1c.4: bridge window [mem 0xfa900000-0xfb2fffff] [ 0.468147] pci 0000:00:1c.4: bridge window [mem 0xd0100000-0xd0afffff 64bit pref] [ 0.468158] pci 0000:00:1e.0: PCI bridge to [bus 20] [ 0.468173] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.468175] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.468177] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.468179] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff window] [ 0.468181] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.468182] pci_bus 0000:02: resource 1 [mem 0xfbe00000-0xfbefffff] [ 0.468184] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.468186] pci_bus 0000:11: resource 0 [io 0x2000-0x2fff] [ 0.468188] pci_bus 0000:11: resource 1 [mem 0xd1600000-0xd17fffff] [ 0.468190] pci_bus 0000:11: resource 2 [mem 0xd1800000-0xd19fffff 64bit pref] [ 0.468191] pci_bus 0000:12: resource 0 [io 0x3000-0x3fff] [ 0.468193] pci_bus 0000:12: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 0.468195] pci_bus 0000:12: resource 2 [mem 0xd1a00000-0xd1bfffff 64bit pref] [ 0.468197] pci_bus 0000:13: resource 0 [io 0xd000-0xdfff] [ 0.468198] pci_bus 0000:13: resource 1 [mem 0xfb300000-0xfbcfffff] [ 0.468200] pci_bus 0000:13: resource 2 [mem 0xd0c00000-0xd15fffff 64bit pref] [ 0.468202] pci_bus 0000:15: resource 0 [io 0xc000-0xcfff] [ 0.468204] pci_bus 0000:15: resource 1 [mem 0xfa900000-0xfb2fffff] [ 0.468205] pci_bus 0000:15: resource 2 [mem 0xd0100000-0xd0afffff 64bit pref] [ 0.468208] pci_bus 0000:20: resource 4 [io 0x0000-0x0cf7 window] [ 0.468210] pci_bus 0000:20: resource 5 [io 0x0d00-0xffff window] [ 0.468211] pci_bus 0000:20: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.468213] pci_bus 0000:20: resource 7 [mem 0xc0000000-0xffffffff window] [ 0.468330] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff] [ 0.468332] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff] [ 0.468383] NET: Registered protocol family 2 [ 0.468657] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.468767] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.469138] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.469574] TCP: Hash tables configured (established 65536 bind 65536) [ 0.469639] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.469735] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.469872] NET: Registered protocol family 1 [ 0.469879] NET: Registered protocol family 44 [ 0.602292] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x662 took 129268 usecs [ 0.730286] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x662 took 124950 usecs [ 0.730334] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.730345] pci 0000:02:00.1: D0 power state depends on 0000:02:00.0 [ 0.730359] pci 0000:12:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.730485] Trying to unpack rootfs image as initramfs... [ 0.910125] random: fast init done [ 0.910126] random: fast init done [ 1.087402] Freeing initrd memory: 83840K [ 1.087441] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.087443] software IO TLB: mapped [mem 0xb7d9d000-0xbbd9d000] (64MB) [ 1.087775] check: Scanning for low memory corruption every 60 seconds [ 1.088412] Initialise system trusted keyrings [ 1.088426] Key type blacklist registered [ 1.088465] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 1.090718] zbud: loaded [ 1.091325] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.091568] fuse: init (API version 7.31) [ 1.091598] *** VALIDATE fuse *** [ 1.091600] *** VALIDATE fuse *** [ 1.091753] Platform Keyring initialized [ 1.097588] Key type asymmetric registered [ 1.097589] Asymmetric key parser 'x509' registered [ 1.097600] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 1.097657] io scheduler mq-deadline registered [ 1.098204] pcieport 0000:00:03.0: AER: enabled with IRQ 29 [ 1.098509] pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 1.098870] pcieport 0000:00:1c.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 1.099232] pcieport 0000:00:1c.2: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 1.099591] pcieport 0000:00:1c.4: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 1.099769] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.099849] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 1.099850] vesafb: scrolling: redraw [ 1.099852] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 1.099873] vesafb: framebuffer at 0xc0000000, mapped to 0x(____ptrval____), using 3072k, total 3072k [ 1.099924] fbcon: Deferring console take-over [ 1.099925] fb0: VESA VGA frame buffer device [ 1.099945] intel_idle: MWAIT substates: 0x1120 [ 1.099946] intel_idle: v0.4.1 model 0x1E [ 1.100466] intel_idle: lapic_timer_reliable_states 0x2 [ 1.100710] ACPI: AC Adapter [AC] (on-line) [ 1.100793] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.100818] ACPI: Power Button [PWRB] [ 1.100873] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 1.100920] ACPI: Lid Switch [LID0] [ 1.100969] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:01/input/input2 [ 1.100997] ACPI: Sleep Button [SBTN] [ 1.101045] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.101086] ACPI: Power Button [PWRF] [ 1.130880] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.130882] ACPI: Thermal Zone [THM] (51 C) [ 1.131053] battery: ACPI: Battery Slot [BAT0] (battery absent) [ 1.131143] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.137644] Linux agpgart interface v0.103 [ 1.143452] loop: module loaded [ 1.143919] libphy: Fixed MDIO Bus: probed [ 1.143920] tun: Universal TUN/TAP device driver, 1.6 [ 1.144055] PPP generic driver version 2.4.2 [ 1.144378] VFIO - User Level meta-driver version: 0.3 [ 1.144660] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.144668] ehci-pci: EHCI PCI platform driver [ 1.144900] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.144908] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.144925] ehci-pci 0000:00:1a.0: debug port 2 [ 1.148935] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.148953] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbf08000 [ 1.166434] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.166511] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 1.166514] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.166515] usb usb1: Product: EHCI Host Controller [ 1.166517] usb usb1: Manufacturer: Linux 5.4.0-60-generic ehci_hcd [ 1.166519] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.166914] hub 1-0:1.0: USB hub found [ 1.166925] hub 1-0:1.0: 2 ports detected [ 1.167303] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.167310] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.167326] ehci-pci 0000:00:1d.0: debug port 2 [ 1.171332] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.171347] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbf07000 [ 1.186435] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.186517] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 1.186519] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.186521] usb usb2: Product: EHCI Host Controller [ 1.186523] usb usb2: Manufacturer: Linux 5.4.0-60-generic ehci_hcd [ 1.186525] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.186892] hub 2-0:1.0: USB hub found [ 1.186901] hub 2-0:1.0: 2 ports detected [ 1.187094] ehci-platform: EHCI generic platform driver [ 1.187107] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.187112] ohci-pci: OHCI PCI platform driver [ 1.187127] ohci-platform: OHCI generic platform driver [ 1.187135] uhci_hcd: USB Universal Host Controller Interface driver [ 1.187216] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13S2] at 0x60,0x64 irq 1,12 [ 1.211356] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.211363] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.211920] mousedev: PS/2 mouse device common for all mice [ 1.212807] rtc_cmos 00:01: RTC can wake from S4 [ 1.213230] rtc_cmos 00:01: registered as rtc0 [ 1.213258] rtc_cmos 00:01: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 1.213268] i2c /dev entries driver [ 1.213328] device-mapper: uevent: version 1.0.3 [ 1.213526] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: [email protected] [ 1.213581] platform eisa.0: Probing EISA bus 0 [ 1.213585] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 1.213589] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 1.213592] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 1.213595] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 1.213598] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 1.213601] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 1.213604] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 1.213606] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 1.213609] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 1.213612] platform eisa.0: EISA: Detected 0 cards [ 1.213618] intel_pstate: CPU model not supported [ 1.214228] ledtrig-cpu: registered to indicate activity on CPUs [ 1.214317] drop_monitor: Initializing network drop monitor service [ 1.214586] NET: Registered protocol family 10 [ 1.225976] Segment Routing with IPv6 [ 1.226034] NET: Registered protocol family 17 [ 1.226226] Key type dns_resolver registered [ 1.228159] RAS: Correctable Errors collector initialized. [ 1.228236] microcode: sig=0x106e5, pf=0x10, revision=0xa [ 1.228442] microcode: Microcode Update Driver: v2.2. [ 1.228450] IPI shorthand broadcast: enabled [ 1.228469] sched_clock: Marking stable (1228104590, 321339)->(1242733992, -14308063) [ 1.228726] registered taskstats version 1 [ 1.228745] Loading compiled-in X.509 certificates [ 1.230683] Loaded X.509 cert 'Build time autogenerated kernel key: a27f806352cb82663e9dcb51d1e4a82214d6dc37' [ 1.230747] zswap: loaded using pool lzo/zbud [ 1.231036] Key type ._fscrypt registered [ 1.231037] Key type .fscrypt registered [ 1.241698] Key type big_key registered [ 1.245328] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.247659] Key type encrypted registered [ 1.247667] AppArmor: AppArmor sha1 policy hashing enabled [ 1.247679] ima: No TPM chip found, activating TPM-bypass! [ 1.247690] ima: Allocated hash algorithm: sha1 [ 1.247704] ima: No architecture policies found [ 1.247728] evm: Initialising EVM extended attributes: [ 1.247730] evm: security.selinux [ 1.247731] evm: security.SMACK64 [ 1.247732] evm: security.SMACK64EXEC [ 1.247734] evm: security.SMACK64TRANSMUTE [ 1.247735] evm: security.SMACK64MMAP [ 1.247736] evm: security.apparmor [ 1.247737] evm: security.ima [ 1.247739] evm: security.capability [ 1.247740] evm: HMAC attrs: 0x1 [ 1.248307] PM: Magic number: 5:780:493 [ 1.248506] rtc_cmos 00:01: setting system clock to 2021-01-13T18:27:52 UTC (1610562472) [ 1.255272] Freeing unused decrypted memory: 2040K [ 1.255949] Freeing unused kernel image memory: 2724K [ 1.280425] Write protecting the kernel read-only data: 22528k [ 1.281145] Freeing unused kernel image memory: 2008K [ 1.281492] Freeing unused kernel image memory: 1184K [ 1.294655] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.294791] x86/mm: Checking user space page tables [ 1.307687] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.307689] Run /init as init process [ 1.324949] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.325824] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.325832] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.403908] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no) [ 1.426600] acpi device:06: registered as cooling_device8 [ 1.426739] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:04/LNXVIDEO:01/input/input6 [ 1.433908] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found [ 1.440445] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000549 (\_SB.PCI0.SBRG.GPI1) (20190816/utaddress-204) [ 1.440453] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.440455] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000549 (\_SB.PCI0.SBRG.GPI1) (20190816/utaddress-204) [ 1.440462] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.440464] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000549 (\_SB.PCI0.SBRG.GPI1) (20190816/utaddress-204) [ 1.440471] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.440472] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 1.441071] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.444798] ahci 0000:00:1f.2: version 3.0 [ 1.453221] libphy: r8169: probed [ 1.453448] r8169 0000:13:00.0 eth0: RTL8102e/RTL8103e, f0:4d:a2:a2:0c:f3, XID 24e, IRQ 18 [ 1.456177] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x13 impl SATA mode [ 1.456181] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst [ 1.480132] r8169 0000:13:00.0 enp19s0: renamed from eth0 [ 1.480271] scsi host0: ahci [ 1.480499] scsi host1: ahci [ 1.480817] scsi host2: ahci [ 1.480992] scsi host3: ahci [ 1.481127] scsi host4: ahci [ 1.481258] scsi host5: ahci [ 1.481339] ata1: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06100 irq 34 [ 1.481345] ata2: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06180 irq 34 [ 1.481346] ata3: DUMMY [ 1.481347] ata4: DUMMY [ 1.481353] ata5: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06300 irq 34 [ 1.481354] ata6: DUMMY [ 1.513806] [drm:radeon_init [radeon]] *ERROR* No UMS support in radeon module! [ 1.513820] fbcon: Taking over console [ 1.513993] Console: switching to colour frame buffer device 128x48 [ 1.514129] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.630955] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.671142] usb 2-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00 [ 1.671147] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.671768] hub 2-1:1.0: USB hub found [ 1.671904] hub 2-1:1.0: 8 ports detected [ 1.791113] usb 1-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00 [ 1.791118] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.791878] hub 1-1:1.0: USB hub found [ 1.792103] hub 1-1:1.0: 6 ports detected [ 1.794832] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.794865] ata5: SATA link down (SStatus 0 SControl 300) [ 1.798627] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.811736] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-L633C, DW50, max UDMA/100 [ 1.811743] ata2.00: applying bridge limits [ 1.833458] ata2.00: configured for UDMA/100 [ 1.867349] ata1.00: ATA-9: ST1000LM014-1EJ164, SM28, max UDMA/133 [ 1.867353] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.874238] tsc: Refined TSC clocksource calibration: 1729.007 MHz [ 1.874251] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x18ec311c265, max_idle_ns: 440795203965 ns [ 1.874367] clocksource: Switched to clocksource tsc [ 1.911739] ata1.00: configured for UDMA/133 [ 1.912320] scsi 0:0:0:0: Direct-Access ATA ST1000LM014-1EJ1 SM28 PQ: 0 ANSI: 5 [ 1.912943] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.912946] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.912958] sd 0:0:0:0: [sda] Write Protect is off [ 1.912960] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.912971] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.912979] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.920330] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L633C DW50 PQ: 0 ANSI: 5 [ 1.931913] sda: sda1 sda2 < sda5 > [ 1.933189] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.958257] usb 2-1.1: new low-speed USB device number 3 using ehci-pci [ 1.995743] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.995747] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.014886] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.015173] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.076785] usb 2-1.1: New USB device found, idVendor=1a2c, idProduct=4094, bcdDevice= 1.10 [ 2.076793] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.076798] usb 2-1.1: Product: USB Keyboard [ 2.076803] usb 2-1.1: Manufacturer: SEMICO [ 2.078131] usb 1-1.6: new high-speed USB device number 3 using ehci-pci [ 2.082115] hidraw: raw HID events driver © Jiri Kosina [ 2.093373] usbcore: registered new interface driver usbhid [ 2.093374] usbhid: USB HID core driver [ 2.097075] input: SEMICO USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:1A2C:4094.0001/input/input8 [ 2.154890] hid-generic 0003:1A2C:4094.0001: input,hidraw0: USB HID v1.10 Keyboard [SEMICO USB Keyboard] on usb-0000:00:1d.0-1.1/input0 [ 2.155095] input: SEMICO USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:1A2C:4094.0002/input/input9 [ 2.158219] usb 2-1.2: new low-speed USB device number 4 using ehci-pci [ 2.214355] input: SEMICO USB Keyboard System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:1A2C:4094.0002/input/input10 [ 2.214456] hid-generic 0003:1A2C:4094.0002: input,hidraw1: USB HID v1.10 Device [SEMICO USB Keyboard] on usb-0000:00:1d.0-1.1/input1 [ 2.227527] usb 1-1.6: New USB device found, idVendor=0c45, idProduct=641d, bcdDevice= 1.26 [ 2.227533] usb 1-1.6: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 2.227536] usb 1-1.6: Product: Laptop_Integrated_Webcam_1.3M [ 2.227539] usb 1-1.6: Manufacturer: CN0FJT7K724870A3W6B7A00 [ 2.275245] usb 2-1.2: New USB device found, idVendor=04d9, idProduct=0499, bcdDevice= 9.10 [ 2.275251] usb 2-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.283574] input: HID 04d9:0499 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:04D9:0499.0003/input/input11 [ 2.284430] hid-generic 0003:04D9:0499.0003: input,hidraw2: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:1d.0-1.2/input0 [ 2.366435] usb 2-1.6: new full-speed USB device number 5 using ehci-pci [ 2.477941] usb 2-1.6: New USB device found, idVendor=0a5c, idProduct=4500, bcdDevice= 1.00 [ 2.477946] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.477950] usb 2-1.6: Product: BCM2046B1 [ 2.477953] usb 2-1.6: Manufacturer: Broadcom [ 2.478690] hub 2-1.6:1.0: USB hub found [ 2.478922] hub 2-1.6:1.0: 3 ports detected [ 2.483091] psmouse serio1: synaptics: queried max coordinates: x [..5650], y [..4710] [ 2.599116] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000/0x0, board id: 0, fw id: 581785 [ 2.672310] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 2.774242] usb 2-1.6.1: new full-speed USB device number 6 using ehci-pci [ 2.886749] usb 2-1.6.1: New USB device found, idVendor=413c, idProduct=8161, bcdDevice= 1.00 [ 2.886755] usb 2-1.6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.889270] input: HID 413c:8161 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.1/2-1.6.1:1.0/0003:413C:8161.0004/input/input12 [ 2.946754] hid-generic 0003:413C:8161.0004: input,hidraw3: USB HID v1.11 Keyboard [HID 413c:8161] on usb-0000:00:1d.0-1.6.1/input0 [ 3.026245] usb 2-1.6.2: new full-speed USB device number 7 using ehci-pci [ 3.139003] usb 2-1.6.2: New USB device found, idVendor=413c, idProduct=8162, bcdDevice= 1.00 [ 3.139009] usb 2-1.6.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.142787] input: HID 413c:8162 Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.2/2-1.6.2:1.0/0003:413C:8162.0005/input/input13 [ 3.143009] hid-generic 0003:413C:8162.0005: input,hidraw4: USB HID v1.11 Mouse [HID 413c:8162] on usb-0000:00:1d.0-1.6.2/input0 [ 3.994255] raid6: sse2x4 gen() 9134 MB/s [ 4.042263] raid6: sse2x4 xor() 6728 MB/s [ 4.090277] raid6: sse2x2 gen() 8171 MB/s [ 4.138275] raid6: sse2x2 xor() 6154 MB/s [ 4.186265] raid6: sse2x1 gen() 6740 MB/s [ 4.234266] raid6: sse2x1 xor() 5181 MB/s [ 4.234269] raid6: using algorithm sse2x4 gen() 9134 MB/s [ 4.234271] raid6: .... xor() 6728 MB/s, rmw enabled [ 4.234278] raid6: using ssse3x2 recovery algorithm [ 4.237922] xor: measuring software checksum speed [ 4.274262] prefetch64-sse: 12996.000 MB/sec [ 4.314255] generic_sse: 11119.000 MB/sec [ 4.314262] xor: using function: prefetch64-sse (12996.000 MB/sec) [ 4.339445] Btrfs loaded, crc32c=crc32c-intel [ 4.537475] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 4.895818] systemd[1]: Inserted module 'autofs4' [ 4.924731] systemd[1]: systemd 245.4-4ubuntu3.3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 4.946522] systemd[1]: Detected architecture x86-64. [ 4.962869] systemd[1]: Set hostname to <ryan-Inspiron-N5010>. [ 5.216377] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. [ 5.276224] systemd[1]: /lib/systemd/system/fancontrol.service:11: PIDFile= references a path below legacy directory /var/run/, updating /var/run/fancontrol.pid → /run/fancontrol.pid; please update the unit file accordingly. [ 5.318942] systemd[1]: Created slice system-modprobe.slice. [ 5.319319] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 5.319669] systemd[1]: Created slice User and Session Slice. [ 5.319738] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.319945] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 5.319993] systemd[1]: Reached target User and Group Name Lookups. [ 5.320011] systemd[1]: Reached target Remote File Systems. [ 5.320023] systemd[1]: Reached target Slices. [ 5.320103] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 5.320208] systemd[1]: Listening on LVM2 poll daemon socket. [ 5.320305] systemd[1]: Listening on Syslog Socket. [ 5.322699] systemd[1]: Listening on Process Core Dump Socket. [ 5.322799] systemd[1]: Listening on fsck to fsckd communication Socket. [ 5.322859] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 5.323067] systemd[1]: Listening on Journal Audit Socket. [ 5.323171] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.323290] systemd[1]: Listening on Journal Socket. [ 5.323408] systemd[1]: Listening on udev Control Socket. [ 5.323487] systemd[1]: Listening on udev Kernel Socket. [ 5.324583] systemd[1]: Mounting Huge Pages File System... [ 5.325797] systemd[1]: Mounting POSIX Message Queue File System... [ 5.327348] systemd[1]: Mounting Kernel Debug File System... [ 5.328924] systemd[1]: Mounting Kernel Trace File System... [ 5.331430] systemd[1]: Starting Journal Service... [ 5.332951] systemd[1]: Starting Availability of block devices... [ 5.334877] systemd[1]: Starting Set the console keyboard layout... [ 5.336673] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 5.338365] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 5.338434] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 5.340433] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 5.340501] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 5.344858] systemd[1]: Starting Load Kernel Modules... [ 5.346757] systemd[1]: Starting Remount Root and Kernel File Systems... [ 5.348448] systemd[1]: Starting udev Coldplug all Devices... [ 5.350655] systemd[1]: Starting Uncomplicated firewall... [ 5.354860] systemd[1]: Mounted Huge Pages File System. [ 5.355225] systemd[1]: Mounted POSIX Message Queue File System. [ 5.355567] systemd[1]: Mounted Kernel Debug File System. [ 5.355880] systemd[1]: Mounted Kernel Trace File System. [ 5.357361] systemd[1]: Finished Availability of block devices. [ 5.358555] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 5.370573] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 5.372825] systemd[1]: Finished Remount Root and Kernel File Systems. [ 5.374754] systemd[1]: Activating swap /swapfile... [ 5.375635] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 5.375714] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 5.377671] systemd[1]: Starting Load/Save Random Seed... [ 5.379916] systemd[1]: Starting Create System Users... [ 5.386737] lp: driver loaded but no devices found [ 5.388622] bpfilter: Loaded bpfilter_umh pid 388 [ 5.389049] Started bpfilter [ 5.394584] ppdev: user-space parallel port driver [ 5.409671] systemd[1]: Finished Load/Save Random Seed. [ 5.411215] systemd[1]: Finished Load Kernel Modules. [ 5.413111] systemd[1]: Mounting FUSE Control File System... [ 5.415170] systemd[1]: Mounting Kernel Configuration File System... [ 5.417304] systemd[1]: Starting Apply Kernel Variables... [ 5.420682] systemd[1]: Mounted FUSE Control File System. [ 5.420972] systemd[1]: Mounted Kernel Configuration File System. [ 5.423952] systemd[1]: Finished Create System Users. [ 5.426049] systemd[1]: Starting Create Static Device Nodes in /dev... [ 5.447710] systemd[1]: Finished Apply Kernel Variables. [ 5.453953] systemd[1]: Finished Create Static Device Nodes in /dev. [ 5.456078] systemd[1]: Starting udev Kernel Device Manager... [ 5.501905] systemd[1]: Finished Set the console keyboard layout. [ 5.544876] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling. [ 5.545168] systemd[1]: Reached target Local File Systems (Pre). [ 5.556385] systemd[1]: Finished udev Coldplug all Devices. [ 5.559132] systemd[1]: Starting Helper to synchronize boot up for ifupdown... [ 5.566209] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS [ 5.566855] systemd[1]: Finished Helper to synchronize boot up for ifupdown. [ 5.567177] systemd[1]: Activated swap /swapfile. [ 5.567324] systemd[1]: Reached target Swap. [ 5.569674] systemd[1]: Started Journal Service. [ 5.580004] systemd-journald[360]: Received client request to flush runtime journal. [ 6.032718] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.033482] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.079709] EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c50 [ 6.135066] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3) [ 6.144192] dell-smbios A80593CE-A997-11DA-B012-B622A1EF5492: WMI SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS [ 6.150603] random: crng init done [ 6.150605] random: 7 urandom warning(s) missed due to ratelimiting [ 6.159073] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input15 [ 6.186131] mc: Linux media interface: v0.10 [ 6.217172] videodev: Linux video capture interface: v2.00 [ 6.224820] [drm:radeon_init [radeon]] *ERROR* No UMS support in radeon module! [ 6.343467] wl: loading out-of-tree module taints kernel. [ 6.343475] wl: module license 'MIXED/Proprietary' taints kernel. [ 6.343476] Disabling lock debugging due to kernel taint [ 6.520540] wl: module verification failed: signature and/or required key missing - tainting kernel [ 6.524373] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (0c45:641d) [ 6.530150] usb 2-1.6.3: new full-speed USB device number 8 using ehci-pci [ 6.563743] input: Laptop_Integrated_Webcam_1.3M: as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input16 [ 6.563900] usbcore: registered new interface driver uvcvideo [ 6.563902] USB Video Class driver (1.1.1) [ 6.638060] wlan0: Broadcom BCM4727 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334) [ 6.646554] wl 0000:12:00.0 wlp18s0: renamed from wlan0 [ 6.648642] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 6.650424] usb 2-1.6.3: New USB device found, idVendor=413c, idProduct=8160, bcdDevice= 1.73 [ 6.650428] usb 2-1.6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.650430] usb 2-1.6.3: Product: Dell Wireless 365 Bluetooth Module [ 6.650433] usb 2-1.6.3: Manufacturer: Dell Computer Corp [ 6.672875] snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client [ 6.688000] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input17 [ 6.693370] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5: line_outs=1 (0xd/0x0/0x0/0x0/0x0) typepeaker [ 6.693373] snd_hda_codec_idt hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 6.693375] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) [ 6.693376] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0 [ 6.693377] snd_hda_codec_idt hdaudioC0D0: inputs: [ 6.693380] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0xc [ 6.693381] snd_hda_codec_idt hdaudioC0D0: Mic=0xa [ 6.729158] Bluetooth: Core ver 2.22 [ 6.729179] NET: Registered protocol family 31 [ 6.729180] Bluetooth: HCI device and connection manager initialized [ 6.729186] Bluetooth: HCI socket layer initialized [ 6.729188] Bluetooth: L2CAP socket layer initialized [ 6.729192] Bluetooth: SCO socket layer initialized [ 6.744497] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 [ 6.744633] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 [ 6.745891] usbcore: registered new interface driver btusb [ 6.923071] audit: type=1400 audit(1610562478.169:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=728 comm="apparmor_parser" [ 6.923584] audit: type=1400 audit(1610562478.169:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=729 comm="apparmor_parser" [ 6.924074] audit: type=1400 audit(1610562478.169:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=723 comm="apparmor_parser" [ 6.924079] audit: type=1400 audit(1610562478.169:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=723 comm="apparmor_parser" [ 6.925819] audit: type=1400 audit(1610562478.169:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=721 comm="apparmor_parser" [ 6.929687] audit: type=1400 audit(1610562478.173:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=730 comm="apparmor_parser" [ 6.931682] audit: type=1400 audit(1610562478.177:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=732 comm="apparmor_parser" [ 6.931688] audit: type=1400 audit(1610562478.177:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=732 comm="apparmor_parser" [ 6.931693] audit: type=1400 audit(1610562478.177:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=732 comm="apparmor_parser" [ 6.932091] audit: type=1400 audit(1610562478.177:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=724 comm="apparmor_parser" [ 8.441933] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 8.441935] Bluetooth: BNEP filters: protocol multicast [ 8.441940] Bluetooth: BNEP socket layer initialized [ 8.651398] NET: Registered protocol family 38 [ 8.972895] RTL8201CP Ethernet r8169-1300:00: attached PHY driver [RTL8201CP Ethernet] (mii_bus:phy_addr=r8169-1300:00, irq=IGNORE) [ 9.083325] r8169 0000:13:00.0 enp19s0: Link is Down [ 11.392167] Bluetooth: RFCOMM TTY layer initialized [ 11.392175] Bluetooth: RFCOMM socket layer initialized [ 11.392182] Bluetooth: RFCOMM ver 1.11 [ 16.602418] CE: hpet increased min_delta_ns to 20115 nsec [ 161.941159] usb 2-1.6: USB disconnect, device number 5 [ 161.941165] usb 2-1.6.1: USB disconnect, device number 6 [ 162.016462] usb 2-1.6.2: USB disconnect, device number 7 [ 162.016713] usb 2-1.6.3: USB disconnect, device number 8 [ 164.467997] usb 2-1.6: new full-speed USB device number 9 using ehci-pci [ 164.578705] usb 2-1.6: New USB device found, idVendor=0a5c, idProduct=4500, bcdDevice= 1.00 [ 164.578711] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 164.578715] usb 2-1.6: Product: BCM2046B1 [ 164.578718] usb 2-1.6: Manufacturer: Broadcom [ 164.579256] hub 2-1.6:1.0: USB hub found [ 164.579479] hub 2-1.6:1.0: 3 ports detected [ 164.873847] usb 2-1.6.1: new full-speed USB device number 10 using ehci-pci [ 164.996204] usb 2-1.6.1: New USB device found, idVendor=413c, idProduct=8161, bcdDevice= 1.00 [ 164.996210] usb 2-1.6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 164.998914] input: HID 413c:8161 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.1/2-1.6.1:1.0/0003:413C:8161.0006/input/input20 [ 165.056594] hid-generic 0003:413C:8161.0006: input,hidraw3: USB HID v1.11 Keyboard [HID 413c:8161] on usb-0000:00:1d.0-1.6.1/input0 [ 165.135891] usb 2-1.6.2: new full-speed USB device number 11 using ehci-pci [ 165.248476] usb 2-1.6.2: New USB device found, idVendor=413c, idProduct=8162, bcdDevice= 1.00 [ 165.248482] usb 2-1.6.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 165.252545] input: HID 413c:8162 Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.2/2-1.6.2:1.0/0003:413C:8162.0007/input/input21 [ 165.253168] hid-generic 0003:413C:8162.0007: input,hidraw4: USB HID v1.11 Mouse [HID 413c:8162] on usb-0000:00:1d.0-1.6.2/input0 [ 165.627987] usb 2-1.6.3: new full-speed USB device number 12 using ehci-pci [ 165.741448] usb 2-1.6.3: New USB device found, idVendor=413c, idProduct=8160, bcdDevice= 1.73 [ 165.741454] usb 2-1.6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 165.741457] usb 2-1.6.3: Product: Dell Wireless 365 Bluetooth Module [ 165.741460] usb 2-1.6.3: Manufacturer: Dell Computer Corp [ 173.461087] usb 2-1.6: USB disconnect, device number 9 [ 173.461093] usb 2-1.6.1: USB disconnect, device number 10 [ 173.552924] usb 2-1.6.2: USB disconnect, device number 11 [ 173.553229] usb 2-1.6.3: USB disconnect, device number 12 [ 174.708157] usb 2-1.6: new full-speed USB device number 13 using ehci-pci [ 174.819082] usb 2-1.6: New USB device found, idVendor=0a5c, idProduct=4500, bcdDevice= 1.00 [ 174.819088] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 174.819091] usb 2-1.6: Product: BCM2046B1 [ 174.819095] usb 2-1.6: Manufacturer: Broadcom [ 174.819612] hub 2-1.6:1.0: USB hub found [ 174.819758] hub 2-1.6:1.0: 3 ports detected [ 175.108168] usb 2-1.6.1: new full-speed USB device number 14 using ehci-pci [ 175.220162] usb 2-1.6.1: New USB device found, idVendor=413c, idProduct=8161, bcdDevice= 1.00 [ 175.220167] usb 2-1.6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 175.222734] input: HID 413c:8161 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.1/2-1.6.1:1.0/0003:413C:8161.0008/input/input23 [ 175.280637] hid-generic 0003:413C:8161.0008: input,hidraw3: USB HID v1.11 Keyboard [HID 413c:8161] on usb-0000:00:1d.0-1.6.1/input0 [ 175.360170] usb 2-1.6.2: new full-speed USB device number 15 using ehci-pci [ 175.472791] usb 2-1.6.2: New USB device found, idVendor=413c, idProduct=8162, bcdDevice= 1.00 [ 175.472796] usb 2-1.6.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 175.476578] input: HID 413c:8162 Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.2/2-1.6.2:1.0/0003:413C:8162.0009/input/input24 [ 175.476922] hid-generic 0003:413C:8162.0009: input,hidraw4: USB HID v1.11 Mouse [HID 413c:8162] on usb-0000:00:1d.0-1.6.2/input0 [ 175.868128] usb 2-1.6.3: new full-speed USB device number 16 using ehci-pci [ 175.981646] usb 2-1.6.3: New USB device found, idVendor=413c, idProduct=8160, bcdDevice= 1.73 [ 175.981652] usb 2-1.6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 175.981655] usb 2-1.6.3: Product: Dell Wireless 365 Bluetooth Module [ 175.981658] usb 2-1.6.3: Manufacturer: Dell Computer Corp [ 240.528879] CE: hpet6 increased min_delta_ns to 20115 nsec [ 247.740829] CE: hpet3 increased min_delta_ns to 20115 nsec [ 247.940828] CE: hpet7 increased min_delta_ns to 20115 nsec [ 250.424920] CE: hpet4 increased min_delta_ns to 20115 nsec [ 735.890826] usb 2-1.1: USB disconnect, device number 3 [ 743.314796] usb 2-1.2: USB disconnect, device number 4 [ 785.579065] r8169 0000:13:00.0 enp19s0: Link is Up - 100Mbps/Full - flow control off [ 785.579087] IPv6: ADDRCONF(NETDEV_CHANGE): enp19s0: link becomes ready [ 786.144584] r8169 0000:13:00.0 enp19s0: Link is Down [ 787.780999] r8169 0000:13:00.0 enp19s0: Link is Up - 100Mbps/Full - flow control off [ 789.772042] r8169 0000:13:00.0 enp19s0: Link is Down [ 791.419362] r8169 0000:13:00.0 enp19s0: Link is Up - 100Mbps/Full - flow control off [ 844.947129] usb 2-1.1: new low-speed USB device number 17 using ehci-pci [ 845.063516] usb 2-1.1: New USB device found, idVendor=04d9, idProduct=0499, bcdDevice= 9.10 [ 845.063522] usb 2-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 845.071803] input: HID 04d9:0499 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:04D9:0499.000A/input/input26 [ 845.072153] hid-generic 0003:04D9:0499.000A: input,hidraw0: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:1d.0-1.1/input0 [ 921.564887] CE: hpet5 increased min_delta_ns to 20115 nsec [ 984.383021] CE: hpet7 increased min_delta_ns to 30172 nsec [ 1454.369650] CE: hpet increased min_delta_ns to 30172 nsec [ 1878.255008] perf: interrupt took too long (2512 > 2500), lowering kernel.perf_event_max_sample_rate to 79500 [ 2206.853210] perf: interrupt took too long (3164 > 3140), lowering kernel.perf_event_max_sample_rate to 63000 [ 2756.600880] perf: interrupt took too long (4121 > 3955), lowering kernel.perf_event_max_sample_rate to 48500
HappyMiner_gr
05-02-2016, 05:59 PM #6The package lists are being processed. Mesa-utils is currently at version 8.4.0-1build1. No updates applied yet. The card is loading successfully.