F5F Stay Refreshed Hardware Desktop LGA 1700 deli and liquid metal components

LGA 1700 deli and liquid metal components

LGA 1700 deli and liquid metal components

K
kwon0513
Junior Member
Find
30
04-02-2018, 01:54 AM
#1
People optimize CPUs by boosting performance and lowering temperatures. I planned to record the steps because I shared both my 13700f and 13900 units; it’s generally safe following these tips. I began heating the CPU using a hot air soldering station at 200°C for two minutes, or a heat gun would work too. After that, I opened the lid with a deliding tool and tweezers, making sure not to use your fingers on the hot surface. Using a razor blade, I cleared as much solder as possible, then applied polish until everything was removed. I also took out all silicone glue—liquid metal is tricky to handle; apply it to both the CPU die and lid, but avoid direct contact with the die since liquid metal conducts electricity. After reassembly, I tested the board and saw a 4°C improvement. Let me know if you want more detailed information.
Reply
Reply
K
kwon0513
04-02-2018, 01:54 AM #1

People optimize CPUs by boosting performance and lowering temperatures. I planned to record the steps because I shared both my 13700f and 13900 units; it’s generally safe following these tips. I began heating the CPU using a hot air soldering station at 200°C for two minutes, or a heat gun would work too. After that, I opened the lid with a deliding tool and tweezers, making sure not to use your fingers on the hot surface. Using a razor blade, I cleared as much solder as possible, then applied polish until everything was removed. I also took out all silicone glue—liquid metal is tricky to handle; apply it to both the CPU die and lid, but avoid direct contact with the die since liquid metal conducts electricity. After reassembly, I tested the board and saw a 4°C improvement. Let me know if you want more detailed information.

Reply
Reply