LGA 1366 Delid design
LGA 1366 Delid design
I'm starting to tackle the upgrade for my 2009 Mac Pro with dual 6-core processors. The problem is that these older models lack the IHS design, so I need to remove the solder. They’re already soldered on, but I’ve found a pair of affordable X5660 chips on eBay. If I manage the delidding process without issues, they won’t significantly slow me down compared to pricier options. From what I’ve read, there are two main opinions: one says it’s easy with a vice and force, while another warns it could be risky or even dangerous. I’m curious if anyone has real experience with this, or if the videos on YouTube give an accurate picture. Either way, I’m planning to try it out, and if things go wrong, I might end up with some unique wall art.
It involves a blend of 1 and 2. Warm them up enough for the solder to release. Just pick the more affordable 6-core option, so a mistake won’t be too costly—x5650s usually cost around $10 each.
It's much simpler with heat, especially if it's just a slight warmth using a hairdrier—far more effective than trying otherwise.