F5F Stay Refreshed Hardware Desktop LED on CPU EZ debug, fails to boot into BIOS or any system.

LED on CPU EZ debug, fails to boot into BIOS or any system.

LED on CPU EZ debug, fails to boot into BIOS or any system.

E
EnviousFox
Junior Member
12
10-12-2022, 08:48 PM
#1
Hello everyone, just completed setting up my new system. It includes: Motherboard – MSI B450 Tomahawk Max II; CPU – Ryzen 5 5600G; RAM – 2x8GB at 3600MHZ; GPU – Corsair Vengeance PSU; Case – something from eBay. After connecting everything, the PC powers on and the GPU, fans, and case lights up. The CPU fan is active but there’s no display output or EZ DEBUG lights for it. I’ve checked for bent pins, debris, or missing thermal paste, but found nothing. I also swapped the CPU cooler to test. What could be wrong? I’m planning to install the latest BIOS next to see if that helps.
E
EnviousFox
10-12-2022, 08:48 PM #1

Hello everyone, just completed setting up my new system. It includes: Motherboard – MSI B450 Tomahawk Max II; CPU – Ryzen 5 5600G; RAM – 2x8GB at 3600MHZ; GPU – Corsair Vengeance PSU; Case – something from eBay. After connecting everything, the PC powers on and the GPU, fans, and case lights up. The CPU fan is active but there’s no display output or EZ DEBUG lights for it. I’ve checked for bent pins, debris, or missing thermal paste, but found nothing. I also swapped the CPU cooler to test. What could be wrong? I’m planning to install the latest BIOS next to see if that helps.

K
KawiianMili
Posting Freak
786
10-12-2022, 08:48 PM
#2
This might resolve your problem.
K
KawiianMili
10-12-2022, 08:48 PM #2

This might resolve your problem.

K
krisjul
Member
139
10-12-2022, 08:48 PM
#3
I checked the methods for installing or updating BIOS, but the videos indicate the system starts booting directly into BIOS. My setup doesn’t follow that process.
K
krisjul
10-12-2022, 08:48 PM #3

I checked the methods for installing or updating BIOS, but the videos indicate the system starts booting directly into BIOS. My setup doesn’t follow that process.

U
Ultimate_Josh
Junior Member
41
10-12-2022, 08:48 PM
#4
Yes, that's one approach, but fortunately your board supports flashback, allowing completion without posting.
U
Ultimate_Josh
10-12-2022, 08:48 PM #4

Yes, that's one approach, but fortunately your board supports flashback, allowing completion without posting.

T
TWD_WarDox59
Junior Member
42
10-12-2022, 08:48 PM
#5
Typically you require a powered CPU to refresh the BIOS, though some boards allow it with minimal hardware. It’s unlikely your model supports this. You’ll likely need a newer Ryzen or Athlon CPU from the second generation.
T
TWD_WarDox59
10-12-2022, 08:48 PM #5

Typically you require a powered CPU to refresh the BIOS, though some boards allow it with minimal hardware. It’s unlikely your model supports this. You’ll likely need a newer Ryzen or Athlon CPU from the second generation.

F
FlyingPlatypus
Member
51
10-12-2022, 08:48 PM
#6
I stand corrected
F
FlyingPlatypus
10-12-2022, 08:48 PM #6

I stand corrected

C
Cat461
Member
65
10-12-2022, 08:48 PM
#7
Thank you, I'll attempt it now and respond once done.
C
Cat461
10-12-2022, 08:48 PM #7

Thank you, I'll attempt it now and respond once done.

C
Creeperm4ster
Member
192
10-12-2022, 08:48 PM
#8
I also attempted it. Connected the GPU and other motherboard ports, and the issue persists.
C
Creeperm4ster
10-12-2022, 08:48 PM #8

I also attempted it. Connected the GPU and other motherboard ports, and the issue persists.