F5F Stay Refreshed Hardware Desktop LED on CPU debug, no output

LED on CPU debug, no output

LED on CPU debug, no output

M
maxdu632
Member
Find
210
06-06-2023, 07:20 AM
#1
Reply
Reply
M
maxdu632
06-06-2023, 07:20 AM #1

Reply
Reply
B
BladeOBlood
Member
Find
190
06-08-2023, 11:53 PM
#2
Consider changing the CPU. If the issue remains, the motherboard might be the problem.
Reply
Reply
B
BladeOBlood
06-08-2023, 11:53 PM #2

Consider changing the CPU. If the issue remains, the motherboard might be the problem.

Reply
Reply
K
KingQbert
Member
Find
59
06-09-2023, 04:02 AM
#3
You can set the maximum speed before installing your RAM by configuring the BIOS settings. Make sure to adjust the overclock limits and then install the 4GB stick at the recommended speed.
Reply
Reply
K
KingQbert
06-09-2023, 04:02 AM #3

You can set the maximum speed before installing your RAM by configuring the BIOS settings. Make sure to adjust the overclock limits and then install the 4GB stick at the recommended speed.

Reply
Reply
C
CadeheLion
Member
Find
179
06-09-2023, 07:25 AM
#4
If it boots with RAM, it won’t boot without it. Unless there was an issue during installation, then it should function after a proper reinstall and you can update the BIOS normally. The default BIOS setting is 2133 MHz for all new RAM modules, which works with any RAM that supports faster speeds (it will maintain 2133 if it supports 3200).
Reply
Reply
C
CadeheLion
06-09-2023, 07:25 AM #4

If it boots with RAM, it won’t boot without it. Unless there was an issue during installation, then it should function after a proper reinstall and you can update the BIOS normally. The default BIOS setting is 2133 MHz for all new RAM modules, which works with any RAM that supports faster speeds (it will maintain 2133 if it supports 3200).

Reply
Reply
O
One_L_Wil
Member
Find
175
06-10-2023, 06:29 AM
#5
Problem resolved: a RAM stick is no longer functioning.
Reply
Reply
O
One_L_Wil
06-10-2023, 06:29 AM #5

Problem resolved: a RAM stick is no longer functioning.

Reply
Reply